rcMvrIpmcReplicationEnable
SWITCH-MVR-MIB ·
.1.3.6.1.4.1.8886.6.1.21.1.17
Object
This object controls whether the IP multicast replication is enabled on the device. A disable(2) value will prevent the IP multicast replication on the device. The ` rcMvrEnable ' object must be set to `disable' prior to modify this object value. If 'rcMvrEnable' and 'rcMvrIpmcReplicationEnable' are both enabled , setting ` rcMvrEnable ' to `disable' will automatically set 'rcMvrIpmcReplicationEnable' to `disable'.
Context
- MIB
- SWITCH-MVR-MIB
- OID
.1.3.6.1.4.1.8886.6.1.21.1.17- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- rcMvrConfig
- Siblings
- 16
Values & Constraints
Type Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcMvrEnable This object controls whether the MVR is enabled
on the device. A disable(2) value will prevent the
MVR on the device. | scalar | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.21.1.1 |
| rcMvrPortStatisticsTable This table contains entries that note statistics information of
the IGMP packets received on each port. | table | - | .1.3.6.1.4.1.8886.6.1.21.1.10 |
| rcMvrProxySuppressionEnable This object controls whether the proxy suppression is enabled on the device.
A disable(2) value will prevent the proxy suppression on the device. | scalar | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.21.1.11 |
| rcIgmpQuerierEnable This object controls whether the IGMP querier is enabled on the device.
A disable(2) value will prevent the IGMP querier on the device. | scalar | SWITCH-TCEnableVar | .1.3.6.1.4.1.8886.6.1.21.1.12 |
| rcMvrProxySourceIpAddress This object specify the source IP address for MVR proxy and querier.
If not configure this object ,the default value is the IP address on
IP interface 0.Then if the IP address on… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.8886.6.1.21.1.13 |
| rcIgmpQueryInterval This object specify interval time that querier send general query packet.
The default value is 60s. | scalar | Seconds Integer32 | .1.3.6.1.4.1.8886.6.1.21.1.14 |
| rcMvrProxyQueryMaxReponseInterval This object specify max response time for host to response the MVR proxy.
The default value is 10s. | scalar | Seconds Integer32 | .1.3.6.1.4.1.8886.6.1.21.1.15 |
| rcMvrProxyQueryLastMemberInterval This object specify last member query interval.When last member leave the
group,MVR proxy will send the special group query packet.If MVR proxy receive
none report packet of this… | scalar | Seconds Integer32 | .1.3.6.1.4.1.8886.6.1.21.1.16 |
| rcMvrVlan Indicates the multicast VLAN ID, which is connected to multicast router. | scalar | SWITCH-TCVlanset | .1.3.6.1.4.1.8886.6.1.21.1.2 |
| rcMvrMaxGroups Indicates the maximum MVR multicast groups supported by
this device. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.6.1.21.1.3 |
| rcMvrCurrentGroups Indicates the current MVR multicast groups configured by user. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.8886.6.1.21.1.4 |
| rcMvrQureyTime Indicates the MVR entry will be timeout if no REPORT packet
received after the time. | scalar | tenths of second Integer32 | .1.3.6.1.4.1.8886.6.1.21.1.5 |
| rcMvrOperMode Indicates the MVR operate mode. A value of dynamic(1) Indicates the uplink
port will initiatively send JOIN packet to the multicast group, compatible(2)
indicates the join action… | scalar | Enumeration | .1.3.6.1.4.1.8886.6.1.21.1.6 |
| rcMvrGroupTable This table contains entries that identify lists of
IP Multicast groups configured on the device. | table | - | .1.3.6.1.4.1.8886.6.1.21.1.7 |
| rcMvrIFTable This table contains entries that identify the configured MVR
information for each port. | table | - | .1.3.6.1.4.1.8886.6.1.21.1.8 |
| rcMvrMemberTable This table contains the list of IP multicast group that
allow user join. | table | - | .1.3.6.1.4.1.8886.6.1.21.1.9 |