swTestString
SW-MIB ·
.1.3.6.1.4.1.1588.2.1.1.1.1.32
Object
scalar
OctetString
presence of this string represents test trap.
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swCurrentDate The current date information in displayable textual
format. | scalar | OctetString | .1.3.6.1.4.1.1588.2.1.1.1.1.1 |
| swSsn The soft serial number of the switch. | scalar | OctetString | .1.3.6.1.4.1.1588.2.1.1.1.1.10 |
| swFlashDLOperStatus The operational status of the FLASH.
The operational states are as follow:
o swCurrent(1) indicates that the FLASH contains the
current firmware image or config file;
o swFwUpgr… | scalar | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.1.11 |
| swFlashDLAdmStatus The desired state of the FLASH.
A management station may place the FLASH in a desired
state by setting this object accordingly:
o swCurrent(1) indicates that the FLASH contains th… | scalar | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.1.12 |
| swFlashDLHost The name or IP address (in dot notation) of the host
to download or upload a relevant file to the FLASH. | scalar | OctetString | .1.3.6.1.4.1.1588.2.1.1.1.1.13 |
| swFlashDLUser The user name on the host to download or upload
a relevant file to or from the FLASH. | scalar | OctetString | .1.3.6.1.4.1.1588.2.1.1.1.1.14 |
| swFlashDLFile The name of the file to be downloaded or uploaded. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1588.2.1.1.1.1.15 |
| swFlashDLPassword The password to be used in for FTP transfer of
files in the download or upload operation. | scalar | OctetString | .1.3.6.1.4.1.1588.2.1.1.1.1.16 |
| swBeaconOperStatus The current operational status of the switch beacon.
When the beacon is on, the LEDs on the front panel
of the switch run alternately from left to right
and right to left. The col… | scalar | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.1.18 |
| swBeaconAdmStatus The desired status of the switch beacon.
When the beacon is set to on, the LEDs on the front
panel of the switch run alternately from left to right
and right to left. The color is… | scalar | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.1.19 |
| swBootDate The date and time when the system last booted, in
displayable textual format. | scalar | OctetString | .1.3.6.1.4.1.1588.2.1.1.1.1.2 |
| swDiagResult The result of the power-on startup (POST)
diagnostics. | scalar | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.1.20 |
| swNumSensors The number of sensors inside the switch. | scalar | Integer32 | .1.3.6.1.4.1.1588.2.1.1.1.1.21 |
| swSensorTable The table of sensor entries. | table | - | .1.3.6.1.4.1.1588.2.1.1.1.1.22 |
| swTrackChangesInfo obsolete Track changes string. For trap only | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1588.2.1.1.1.1.23 |
| swID The number of the logical switch (0/1) | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1588.2.1.1.1.1.24 |
| swEtherIPAddress The IP Address of the Ethernet interface of this logical
switch. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1588.2.1.1.1.1.25 |
| swEtherIPMask The IP Mask of the Ethernet interface of this logical switch. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1588.2.1.1.1.1.26 |
| swFCIPAddress The IP Address of the FC interface of this logical switch. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1588.2.1.1.1.1.27 |
| swFCIPMask The IP Mask of the FC interface of this logical switch. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.1588.2.1.1.1.1.28 |
| swIPv6Address IPV6 address. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.1588.2.1.1.1.1.29 |
| swFWLastUpdated obsolete The information indicates the date when the firmware
was last updated, in displayable textual format. | scalar | OctetString | .1.3.6.1.4.1.1588.2.1.1.1.1.3 |
| swIPv6Status The current status of ipv6 address. | scalar | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.1.30 |
| swModel Indicates whether the switch is 7500 or 7500E . | scalar | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.1.31 |
| swPortList This string represents the list of ports and
its WWN when ports moved from one switch to another. | scalar | OctetString | .1.3.6.1.4.1.1588.2.1.1.1.1.33 |
| swBrcdTrapBitMask Type of notification will be represented by a single bit
in this variable.
0x01 - Fabric change event
0x02 - Device change event
0x04 - Fapwwn change event
0x08 - FDMI event… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1588.2.1.1.1.1.34 |
| swFCPortPrevType This represents port type of a port before
it goes online/offline and it is valid only in swFcPortSCN trap | scalar | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.1.35 |
| swDeviceStatus This represents the attached device status.
The status will change whenever port/node goes to
online/offline | scalar | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.1.36 |
| swBrcdBitObjVal It will have object value for each change mentioned in swBrcdGenericTrap. It will be
empty for the events which don't have any values. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1588.2.1.1.1.1.37 |
| swIODState This represents the in-order-delivery (IOD) feature state. | scalar | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.1.38 |
| swFlashLastUpdated The information indicates the date when the FLASH
was last updated, in displayable textual format. | scalar | OctetString | .1.3.6.1.4.1.1588.2.1.1.1.1.4 |
| swBootPromLastUpdated The information indicates the date when the boot PROM
was last updated, in displayable textual format. | scalar | OctetString | .1.3.6.1.4.1.1588.2.1.1.1.1.5 |
| swFirmwareVersion The current version of the firwmare. | scalar | OctetString | .1.3.6.1.4.1.1588.2.1.1.1.1.6 |
| swOperStatus The current operational status of the switch.
The states are as follow:
o online(1) means the switch is accessible by an external
Fibre Channel port;
o offline(2) means the swit… | scalar | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.1.7 |
| swAdmStatus The desired administrative status of the switch.
A management station may place the switch in a desired
state by setting this object accordingly. The states
are as follow:
o onlin… | scalar | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.1.8 |
| swTelnetShellAdmStatus deprecated The desired administrative status of the Telnet
shell. By setting it to terminated(1), the current
Telnet shell task is deleted. When this variable instance
is read, it reports th… | scalar | Enumeration | .1.3.6.1.4.1.1588.2.1.1.1.1.9 |