swPortList

SW-MIB · .1.3.6.1.4.1.1588.2.1.1.1.1.33
MIB view Table view

Object

scalar OctetString 
This string represents the list of ports and
its WWN when ports moved from one switch to another.

Context

MIB
SW-MIB
OID
.1.3.6.1.4.1.1588.2.1.1.1.1.33
Type
scalar
Access
noaccess
Status
current
Parent
swSystem
Siblings
36

Syntax

OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
swCurrentDate
The current date information in displayable textual format.
scalarOctetString.1.3.6.1.4.1.1588.2.1.1.1.1.1
swSsn
The soft serial number of the switch.
scalarOctetString.1.3.6.1.4.1.1588.2.1.1.1.1.10
swFlashDLOperStatus
The operational status of the FLASH. The operational states are as follow: o swCurrent(1) indicates that the FLASH contains the current firmware image or config file; o swFwUpgr…
scalarEnumeration.1.3.6.1.4.1.1588.2.1.1.1.1.11
swFlashDLAdmStatus
The desired state of the FLASH. A management station may place the FLASH in a desired state by setting this object accordingly: o swCurrent(1) indicates that the FLASH contains th…
scalarEnumeration.1.3.6.1.4.1.1588.2.1.1.1.1.12
swFlashDLHost
The name or IP address (in dot notation) of the host to download or upload a relevant file to the FLASH.
scalarOctetString.1.3.6.1.4.1.1588.2.1.1.1.1.13
swFlashDLUser
The user name on the host to download or upload a relevant file to or from the FLASH.
scalarOctetString.1.3.6.1.4.1.1588.2.1.1.1.1.14
swFlashDLFile
The name of the file to be downloaded or uploaded.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.1588.2.1.1.1.1.15
swFlashDLPassword
The password to be used in for FTP transfer of files in the download or upload operation.
scalarOctetString.1.3.6.1.4.1.1588.2.1.1.1.1.16
swBeaconOperStatus
The current operational status of the switch beacon. When the beacon is on, the LEDs on the front panel of the switch run alternately from left to right and right to left. The col…
scalarEnumeration.1.3.6.1.4.1.1588.2.1.1.1.1.18
swBeaconAdmStatus
The desired status of the switch beacon. When the beacon is set to on, the LEDs on the front panel of the switch run alternately from left to right and right to left. The color is…
scalarEnumeration.1.3.6.1.4.1.1588.2.1.1.1.1.19
swBootDate
The date and time when the system last booted, in displayable textual format.
scalarOctetString.1.3.6.1.4.1.1588.2.1.1.1.1.2
swDiagResult
The result of the power-on startup (POST) diagnostics.
scalarEnumeration.1.3.6.1.4.1.1588.2.1.1.1.1.20
swNumSensors
The number of sensors inside the switch.
scalarInteger32.1.3.6.1.4.1.1588.2.1.1.1.1.21
swSensorTable
The table of sensor entries.
table-.1.3.6.1.4.1.1588.2.1.1.1.1.22
swTrackChangesInfo obsolete
Track changes string. For trap only
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.1588.2.1.1.1.1.23
swID
The number of the logical switch (0/1)
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.1588.2.1.1.1.1.24
swEtherIPAddress
The IP Address of the Ethernet interface of this logical switch.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1588.2.1.1.1.1.25
swEtherIPMask
The IP Mask of the Ethernet interface of this logical switch.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1588.2.1.1.1.1.26
swFCIPAddress
The IP Address of the FC interface of this logical switch.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1588.2.1.1.1.1.27
swFCIPMask
The IP Mask of the FC interface of this logical switch.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.1588.2.1.1.1.1.28
swIPv6Address
IPV6 address.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.1588.2.1.1.1.1.29
swFWLastUpdated obsolete
The information indicates the date when the firmware was last updated, in displayable textual format.
scalarOctetString.1.3.6.1.4.1.1588.2.1.1.1.1.3
swIPv6Status
The current status of ipv6 address.
scalarEnumeration.1.3.6.1.4.1.1588.2.1.1.1.1.30
swModel
Indicates whether the switch is 7500 or 7500E .
scalarEnumeration.1.3.6.1.4.1.1588.2.1.1.1.1.31
swTestString
presence of this string represents test trap.
scalarOctetString.1.3.6.1.4.1.1588.2.1.1.1.1.32
swBrcdTrapBitMask
Type of notification will be represented by a single bit in this variable. 0x01 - Fabric change event 0x02 - Device change event 0x04 - Fapwwn change event 0x08 - FDMI event…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.1588.2.1.1.1.1.34
swFCPortPrevType
This represents port type of a port before it goes online/offline and it is valid only in swFcPortSCN trap
scalarEnumeration.1.3.6.1.4.1.1588.2.1.1.1.1.35
swDeviceStatus
This represents the attached device status. The status will change whenever port/node goes to online/offline
scalarEnumeration.1.3.6.1.4.1.1588.2.1.1.1.1.36
swBrcdBitObjVal
It will have object value for each change mentioned in swBrcdGenericTrap. It will be empty for the events which don't have any values.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.1588.2.1.1.1.1.37
swIODState
This represents the in-order-delivery (IOD) feature state.
scalarEnumeration.1.3.6.1.4.1.1588.2.1.1.1.1.38
swFlashLastUpdated
The information indicates the date when the FLASH was last updated, in displayable textual format.
scalarOctetString.1.3.6.1.4.1.1588.2.1.1.1.1.4
swBootPromLastUpdated
The information indicates the date when the boot PROM was last updated, in displayable textual format.
scalarOctetString.1.3.6.1.4.1.1588.2.1.1.1.1.5
swFirmwareVersion
The current version of the firwmare.
scalarOctetString.1.3.6.1.4.1.1588.2.1.1.1.1.6
swOperStatus
The current operational status of the switch. The states are as follow: o online(1) means the switch is accessible by an external Fibre Channel port; o offline(2) means the swit…
scalarEnumeration.1.3.6.1.4.1.1588.2.1.1.1.1.7
swAdmStatus
The desired administrative status of the switch. A management station may place the switch in a desired state by setting this object accordingly. The states are as follow: o onlin…
scalarEnumeration.1.3.6.1.4.1.1588.2.1.1.1.1.8
swTelnetShellAdmStatus deprecated
The desired administrative status of the Telnet shell. By setting it to terminated(1), the current Telnet shell task is deleted. When this variable instance is read, it reports th…
scalarEnumeration.1.3.6.1.4.1.1588.2.1.1.1.1.9