swFCPortPhyState

SW-MIB · .1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3
MIB view Table view

Object

column Enumeration 
This object identifies the physical state of
the port:
	noCard(1)	no card present in this switch slot;
	noTransceiver(2)	no Transceiver module in this port.
						noGbic(2) was used previously. Transceiver
						is the generic name for GBIC, SFP etc.;
	laserFault(3)	the module is signaling a laser fault
			(defective Transceiver);
	noLight(4)	the module is not receiving light;
	noSync(5)	the module is receiving light but is
			out of sync;
	inSync(6)	the module is receiving light and is
			in sync;
	portFault(7)	the port is marked faulty (defective
			Transceiver, cable or device);
	diagFault(8)	the port failed diagnostics (defective
			G_Port or FL_Port card or motherboard);
	lockRef(9)	the port is locking to the reference
			signal.
	validating(10)  Validation is in progress
	invalidModule(11) Invalid SFP
	unknown(255)    unknown.

Context

MIB
SW-MIB
OID
.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3
Type
column
Access
readonly
Status
current
Parent
swFCPortEntry
Table
swFCPortTable
Siblings
36

Syntax

Enumeration

Values & Constraints

Enumerated Values
1noCard
2noTransceiver
3laserFault
4noLight
5noSync
6inSync
7portFault
8diagFault
9lockRef
10validating
11invalidModule
14noSigDet
255unknown

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
swFCPortIndex
This object identifies the switch port index. Note that the value of a port index is 1 higher than the port number labeled on the front panel. E.g. port index 1 correspond to port…
columnBrocade-TCSwPortIndex.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1
swFCPortTxWords
This object counts the number of Fibre Channel words that the port has transmitted.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11
swFCPortRxWords
This object counts the number of Fibre Channel words that the port has received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12
swFCPortTxFrames
This object counts the number of (Fibre Channel) frames that the port has transmitted.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.13
swFCPortRxFrames
This object counts the number of (Fibre Channel) frames that the port has received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.14
swFCPortRxC2Frames
This object counts the number of Class 2 frames that the port has received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.15
swFCPortRxC3Frames
This object counts the number of Class 3 frames that the port has received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.16
swFCPortRxLCs
This object counts the number of Link Control frames that the port has received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.17
swFCPortRxMcasts
This object counts the number of Multicast frames that the port has received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.18
swFCPortTooManyRdys
This object counts the number of times when RDYs exceeds the frames received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.19
swFCPortType
This object identifies the type of switch port. It may be of type stitch(1), flannel(2), loom(3) , bloom(4),rdbloom(5) or wormhole(6).
columnEnumeration.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2
swFCPortNoTxCredits
This object counts the number of times when the transmit credit has reached zero.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.20
swFCPortRxEncInFrs
This object counts the number of encoding error or disparity error inside frames received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.21
swFCPortRxCrcs
This object counts the number of CRC errors detected for frames received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.22
swFCPortRxTruncs
This object counts the number of truncated frames that the port has received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.23
swFCPortRxTooLongs
This object counts the number of received frames that are too long.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.24
swFCPortRxBadEofs
This object counts the number of received frames that have bad EOF delimiter.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.25
swFCPortRxEncOutFrs
This object counts the number of encoding error or disparity error outside frames received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.26
swFCPortRxBadOs
This object counts the number of invalid Ordered Sets received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.27
swFCPortC3Discards
This object counts the number of Class 3 frames that the port has discarded.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.28
swFCPortMcastTimedOuts
This object counts the number of Multicast frames that has been timed out.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.29
swFCPortTxMcasts
This object counts the number of Multicast frames that has been transmitted.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.30
swFCPortLipIns
This object counts the number of Loop Initializations that has been initiated by loop devices attached.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.31
swFCPortLipOuts
This object counts the number of Loop Initializations that has been initiated by the port.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.32
swFCPortLipLastAlpa
This object indicates the Physical Address (AL_PA) of the loop device that initiated the last Loop Initialization.
columnOctetString.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.33
swFCPortWwn
The World_wide_Name of the Fibre Channel port. The contents of an instance are in the IEEE extended format as specified in FC-PH; the 12-bit port identifier represents the port nu…
columnOctetString.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.34
swFCPortSpeed obsolete
The desired baud rate for the port. It can have the values of 1GB (1), 2GB (2), Auto-Negotiate (3), 4GB (4), 8GB (5), 10GB (6), 16GB (8). Some of the above values may not be suppo…
columnEnumeration.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.35
swFCPortName
A string indicates the name of the addressed port. The names should be persistent across switch reboots. Port names do not have to be unique within a switch or within a fabric.
columnOctetString.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36
swFCPortSpecifier
This string indicates the physical port number of the addressed port. The format of the string is: <slot>/port, where 'slot' being present only for bladed systems.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.37
swFCPortFlag
A bit map of port status flags which includes the information of port type. Currently this will indicate if the port is virtual or physical.
columnFcPortFlag.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.38
swFCPortBrcdType
The Brocade port type.
columnEnumeration.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.39
swFCPortOpStatus
This object identifies the operational status of the port. The online(1) state indicates that user frames can be passed. The unknown(0) state indicates that likely the port module…
columnEnumeration.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4
swFCPortDisableReason
It indicates the state change reason when port goes from online to offline
columnEnumeration.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.40
swFCPortAdmStatus
The desired state of the port. A management station may place the port in a desired state by setting this object accordingly. The testing(3) state indicates that no user frames c…
columnEnumeration.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5
swFCPortLinkState
This object indicates the link state of the port. The value may be: enabled(1) - port is allowed to participate in the FC-PH protocol with its attached port (or ports if it is …
columnEnumeration.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6
swFCPortTxType
This object indicates the media transmitter type of the port. The value may be: unknown(1) cannot determined to the port driver lw(2) long wave laser sw(3) short wave l…
columnEnumeration.1.3.6.1.4.1.1588.2.1.1.1.6.2.1.7