fsVlanTunnelDot1xAddress

SUPERMICRO-VLAN-EXT-MIB · .1.3.6.1.4.1.10876.101.1.137.2.4
MIB view Table view

Object

scalar r/w SNMPv2-TCMacAddress 
The MAC address to be used for Dot1x packets tunneling.
When Dot1x tunneling is enabled on a port, this MAC address will 
be used as the the destination MAC address for the customer Dot1x
packets received with reserved address over this port. 
          
Dot1x packets received with this MAC address will be treated as 
data packets and not processed.
          
When the tunneled Dot1x packets are sent out of the given Network, 
this MAC address will be replaced with the reserved address defined 
for Dot1x packets. This is done only when Dot1x protocol tunnel 
status is set to Tunnel on the outgoing port.Dropped otherwise.

Context

MIB
SUPERMICRO-VLAN-EXT-MIB
OID
.1.3.6.1.4.1.10876.101.1.137.2.4
Type
scalar
Access
readwrite
Status
current
Parent
fsVlanTunnelObjects
Siblings
12

Syntax

SNMPv2-TCMacAddress
Source
SNMPv2-TCMacAddress
Base type
OctetString

Values & Constraints

Type Constraints
range: 6

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsVlanTunnelBpduPri
Specifies the default User Priority for all the tunneled Layer 2 BPDU's received on tunnel ports.
scalarInteger32.1.3.6.1.4.1.10876.101.1.137.2.1
fsVlanTunnelMvrpAddress
The MAC address to be used for MVRP PDUs tunneling. When MVRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the received MVRP…
scalarSNMPv2-TCMacAddress.1.3.6.1.4.1.10876.101.1.137.2.10
fsVlanTunnelMmrpAddress
The MAC address to be used for MMRP PDUs tunneling. When MMRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the MMRP PDUs rec…
scalarSNMPv2-TCMacAddress.1.3.6.1.4.1.10876.101.1.137.2.11
fsVlanTunnelElmiAddress
The MAC address to be used for ELMI packets tunneling . When ELMI tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the ELMI pack…
scalarSNMPv2-TCMacAddress.1.3.6.1.4.1.10876.101.1.137.2.12
fsVlanTunnelLldpAddress
The MAC address to be used for LLDP packets tunneling . When LLDP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the LLDP pack…
scalarSNMPv2-TCMacAddress.1.3.6.1.4.1.10876.101.1.137.2.13
fsVlanTunnelStpAddress
The MAC address to be used for Customer STP BPDUs tunneling. When STP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address o…
scalarSNMPv2-TCMacAddress.1.3.6.1.4.1.10876.101.1.137.2.2
fsVlanTunnelLacpAddress
The MAC address to be used for LACP packets tunneling . When LACP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the LACP pack…
scalarSNMPv2-TCMacAddress.1.3.6.1.4.1.10876.101.1.137.2.3
fsVlanTunnelGvrpAddress
The MAC address to be used for GVRP PDUs tunneling. When GVRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the cu…
scalarSNMPv2-TCMacAddress.1.3.6.1.4.1.10876.101.1.137.2.5
fsVlanTunnelGmrpAddress
The MAC address to be used for GMRP PDUs tunneling. When GMRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address of the customer GM…
scalarSNMPv2-TCMacAddress.1.3.6.1.4.1.10876.101.1.137.2.6
fsVlanTunnelTable
This table contains information about the tunnel ports. A walk on this table will show only those interfaces that are configured for tunneling. This table is supported only when …
table-.1.3.6.1.4.1.10876.101.1.137.2.7
fsVlanTunnelProtocolTable
This table contains information about the handling (Tunnel/Peer/ Discard)of customer Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/ IGMP/MVRP and MMRP) inside a given network.
table-.1.3.6.1.4.1.10876.101.1.137.2.8
fsVlanTunnelProtocolStatsTable
This table contains statistics information about the tunneled Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) received and transmitted over a port.
table-.1.3.6.1.4.1.10876.101.1.137.2.9