fsSnoopVlanCfgQuerier

SUPERMICRO-SNOOP-MIB · .1.3.6.1.4.1.10876.101.1.105.3.4.1.9

MIB view Table view

Object

column r/w Enumeration

The snooping switch can be configured to send IGMP/MLD queries 
when IGMP/MLD routers are not present in the VLAN. When set to 
'enabled' the switch will generate general query messages. 
The query messages will be suppressed if the switch receives 
the query message from any other router in the VLAN. Switch 
should be configured as a querier for a VLAN only when there 
are no queriers in the network.
This configuration is valid only in proxy reporting mode.

Context

MIB: SUPERMICRO-SNOOP-MIB
OID: .1.3.6.1.4.1.10876.101.1.105.3.4.1.9
Type: column
Access: readwrite
Status: current
Parent: fsSnoopVlanFilterEntry
Table: fsSnoopVlanFilterTable
Siblings: 14

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	enabled
`2`	disabled

Related Objects

Sibling Objects

Object	Type	Syntax	OID
fsSnoopVlanFilterInstId Instance ID pertaining to VLAN filter table entry.	column	Integer32	`.1.3.6.1.4.1.10876.101.1.105.3.4.1.1`
fsSnoopVlanQueryInterval This is the interval (in seconds) for which the switch sends general queries in proxy and proxy-reporting mode. In proxy-reporting mode, General queries will be sent on all downs…	column	Integer32	`.1.3.6.1.4.1.10876.101.1.105.3.4.1.10`
fsSnoopVlanRtrPortList List of ports which are configured statically as router ports. statically. This object may not be sufficient to represent the full set of interfaces in each switch instance in env…	column	Q-BRIDGE-MIBPortList	`.1.3.6.1.4.1.10876.101.1.105.3.4.1.11`
fsSnoopVlanRowStatus The status of a row in the VLAN filter table. Using this object, new entries can be created in the VLAN filter table and the existing entries can be removed from the VLAN filte…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.10876.101.1.105.3.4.1.12`
fsSnoopVlanStartupQueryCount The Startup Query Count is the number of Queries sent out on startup, separated by the Startup Query Interval. The default value is the Robustness.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.10876.101.1.105.3.4.1.13`
fsSnoopVlanStartupQueryInterval Interval between the general query messages sent by the switch during startup of querier election process. This value must be <= (Query Interval/4)	column	seconds Integer32	`.1.3.6.1.4.1.10876.101.1.105.3.4.1.14`
fsSnoopVlanOtherQuerierPresentInterval The Other Querier Present Interval is the length of time that must pass before a multicast router decides that there is no longer another multicast router which should be the qu…	column	seconds Integer32	`.1.3.6.1.4.1.10876.101.1.105.3.4.1.15`
fsSnoopVlanFilterVlanId VLAN ID for which snooping configuration is to be done.	column	Integer32	`.1.3.6.1.4.1.10876.101.1.105.3.4.1.2`
fsSnoopVlanFilterInetAddressType Indicates whether the row belongs to IGS/MLD snooping	column	INET-ADDRESS-MIBInetAddressType	`.1.3.6.1.4.1.10876.101.1.105.3.4.1.3`
fsSnoopVlanSnoopStatus Enables or disables IGS/MLDS on that specific VLAN	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.105.3.4.1.4`
fsSnoopVlanOperatingVersion deprecated Indicates the operating version of the IGS/MLDS switch for a specific VLAN. The default operating mode on a specific VLAN is IGMP version 3 i.e, V3(3) or MLD version 2 i.e, V2(2…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.105.3.4.1.5`
fsSnoopVlanCfgOperVersion deprecated Indicates the operating version of the IGS/MLDS switch for a specific VLAN. The default operating mode on a specific VLAN is IGMP version 3 i.e, V3(3) or MLD version 2 i.e., V2(…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.105.3.4.1.6`
fsSnoopVlanFastLeave Enables or disables fast leave for the VLAN. When it is 'disabled',on reception of a leave message the switch checks if they are any interested receivers for the group by sending…	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.105.3.4.1.7`
fsSnoopVlanQuerier Indicates whether the switch is configured as a querier in the VLAN	column	Enumeration	`.1.3.6.1.4.1.10876.101.1.105.3.4.1.8`