fsSnoopInstanceGlobalEnhancedMode
SUPERMICRO-SNOOP-MIB ·
.1.3.6.1.4.1.10876.101.1.105.2.1.1.5
Object
column
r/w
Enumeration
This object is used to enable or disable the snooping module
functioning in the enhanced mode.
By default, the snooping module operates in the normal or
default mode. In the default mode, the module multicasts from
an Outer VLAN (SVLAN) to a set of ports. The Inner VLAN (CVLAN)
will typically have a value of zero. In this mode, an S-tagged
multicast data or query packet from one port can result in
multiple packets on separate egress ports, but only one packet
on any one egress port with an S-tag or with no tag.
Enabling this object causes the snooping module to operate in
the enhanced mode. The module multicasts from an Outer VLAN
(SVLAN) to a set of ports & Inner VLANs (CVLAN). In this mode,
an S-tagged multicast data or query packet from one port can
result in multiple copies of the packet on the same egress port,
each with a different C-tag. The Inner VLAN (CVLAN) will
typically have a valid value within the designated range.
However under certain scenarios, the Inner VLAN may also have a
value of zero.
Disabling this object causes the snooping module to operate in
the default mode.
Context
- MIB
- SUPERMICRO-SNOOP-MIB
- OID
.1.3.6.1.4.1.10876.101.1.105.2.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsSnoopInstanceGlobalEntry
- Table
- fsSnoopInstanceGlobalTable
- Siblings
- 7
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsSnoopInstanceGlobalInstId Instance ID pertaining to the global configuration entry. | column | Integer32 | .1.3.6.1.4.1.10876.101.1.105.2.1.1.1 |
| fsSnoopInstanceGlobalMcastFwdMode Indicates the mode to be used for building the forwarding
table i.e, whether IP based or MAC address based.
The hardware should support programming of S,G and *,G
entries for IG… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.105.2.1.1.2 |
| fsSnoopInstanceGlobalSystemControl Snooping module is shutdown or started through this object.
When set to 'start', resources required by the
SNOOP module is allocated and the module starts running.
When set t… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.105.2.1.1.3 |
| fsSnoopInstanceGlobalLeaveConfigLevel A global configuration to specify if the leave processing
mechanism needs to be configured at the vlan level or at
the port level.
When this object is set to vlanbased, the mib … | column | Enumeration | .1.3.6.1.4.1.10876.101.1.105.2.1.1.4 |
| fsSnoopInstanceGlobalReportProcessConfigLevel A global configuration to specify if the report processing
mechanism needs to be configured for the non-router ports or
at the all ports level.
When this object is set to non-rout… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.105.2.1.1.6 |
| fsSnoopInstanceGlobalSparseMode This object is used to enable or disable the snooping module
functioning in the sparse mode.
By default, the snooping module operates in the non-sparse
mode. In th… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.105.2.1.1.7 |
| fsSnoopInstanceGlobalMulticastFilterStatus This object is used to enable/disable the IGS multicast filtering feature.
Interface mapping configurations will not be affected by this object
status. | column | Enumeration | .1.3.6.1.4.1.10876.101.1.105.2.1.1.8 |