futOspfRestartExitReason

SUPERMICRO-OSPF-MIB · .1.3.6.1.4.1.10876.101.1.10.1.24
MIB view Table view

Object

scalar Enumeration 
Describes the outcome of the last attempt at a
graceful restart. If the value is 'none', no restart
has yet been attempted. If the value is 'inProgress',
a restart attempt is currently underway.

Context

MIB
SUPERMICRO-OSPF-MIB
OID
.1.3.6.1.4.1.10876.101.1.10.1.24
Type
scalar
Access
readonly
Status
current
Parent
futospfGeneralGroup
Siblings
39

Syntax

Enumeration

Values & Constraints

Enumerated Values
1none
2inProgress
3completed
4timedOut
5topologyChanged

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
futOspfOverFlowState
Indicates whether router is in overflow state or not.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.1.10.1.1
futOspfMaxRoutes deprecated
This gives the maximum number of routing table entries.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.10.1.10
futOspfMaxLsaSize deprecated
This specifies the maximum size of the LSA.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.10.1.11
futOspfTraceLevel
This object is used to define level of trace required for OSPF. Levels are defined as follows. 0x00000100 -- Packet High Level Dump Trace. 0x00000200 -- Packet Low Level Dump Tra…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.10.1.12
futOspfMinLsaInterval
The minimum time between distinct originations of any particular LSA.
scalarInteger32.1.3.6.1.4.1.10876.101.1.10.1.13
futOspfABRType
Different Types of ABRs supported
scalarEnumeration.1.3.6.1.4.1.10876.101.1.10.1.14
futOspfNssaAsbrDefRtTrans
Specifies the P-Bit setting for the default Type-7 LSA generated by ASBR(which is not ABR).When set disabled, P-Bit is clear in the generated default Lsa. When set to enabled, P-…
scalarEnumeration.1.3.6.1.4.1.10876.101.1.10.1.15
futOspfDefaultPassiveInterface
When set to true all OSPF interfaces created after this setting will be passive interfaces. If set to false OSPF interfaces created after this setting will not be passive.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.1.10.1.16
futOspfSpfHoldtime
Minimum time between two consecutive SPF calculations. Time is configured in milli seconds
scalarInteger32.1.3.6.1.4.1.10876.101.1.10.1.17
futOspfSpfDelay
The Delay at which routing calculation is carried after a topology change. Time is configured in milli seconds
scalarInteger32.1.3.6.1.4.1.10876.101.1.10.1.18
futOspfRestartSupport
The router.s support for OSPF graceful restart. Options include: no restart support, only planned restarts, or both planned and unplanned restarts. This object is persi…
scalarEnumeration.1.3.6.1.4.1.10876.101.1.10.1.19
futOspfPktsRcvd
This gives the Total no. of Packets received.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.10876.101.1.10.1.2
futOspfRestartInterval
Configured OSPF graceful restart timeout interval. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
scalarInteger32.1.3.6.1.4.1.10876.101.1.10.1.20
futOspfRestartStrictLsaChecking
Indicates if strict LSA checking is enabled for graceful restart. This object is persistent and when written the entity SHOULD save the change to non-volatile storage.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.1.10.1.21
futOspfRestartStatus
Current status of OSPF graceful restart.
scalarEnumeration.1.3.6.1.4.1.10876.101.1.10.1.22
futOspfRestartAge
Remaining time in current OSPF graceful restart interval.
scalarseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.10.1.23
futOspfHelperSupport
The router.s helper support for OSPF graceful restart. Options include: unknown,softwarerestart,swreloadupgrade, switchtoredundant. futOspfHelperSupport is indicated by bitmap. …
scalarBits.1.3.6.1.4.1.10876.101.1.10.1.25
futOspfHelperGraceTimeLimit
Configured OSPF graceful restart interval limit in helper side. Time is configured in seconds This object is persistent and when written the entity SHOULD save the cha…
scalarInteger32.1.3.6.1.4.1.10876.101.1.10.1.26
futOspfRestartAckState
Indicates Reception required / not-required . whether GraceLSAs sent by this router are expected to be acknowledged by peers. This object is persistent and when writt…
scalarEnumeration.1.3.6.1.4.1.10876.101.1.10.1.27
futOspfGraceLsaRetransmitCount
Number of retransmissions for unacknowledged GraceLSAs
scalarInteger32.1.3.6.1.4.1.10876.101.1.10.1.28
futOspfRestartReason
The router.s restarter reason code of OSPF graceful restart. Options include: unknown,softwarerestart,swreloadupgrade, switchtoredundant. This object is persistent and when writte…
scalarEnumeration.1.3.6.1.4.1.10876.101.1.10.1.29
futOspfPktsTxed
This gives the Total no. of Packets Transmitted.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.10876.101.1.10.1.3
futOspfRTStaggeringInterval
This object denotes the time interval in milliseconds after which the route calculation is suspended for doing all other OSPF operations.Default value of this object is equal to…
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.10876.101.1.10.1.30
futOspfRTStaggeringStatus
This object indicates the status of route table calculation staggering option
scalarEnumeration.1.3.6.1.4.1.10876.101.1.10.1.31
futOspfHotStandbyAdminStatus
High Availabilty feature enabled or disabled in OSPF
scalarEnumeration.1.3.6.1.4.1.10876.101.1.10.1.32
futOspfHotStandbyState
Internal State of the OSPF instance. init(1) implies that the OSPF instance is up, but is unaware of the status of its peer. activeStandbyUp(2) implies that the current OSPF inst…
scalarEnumeration.1.3.6.1.4.1.10876.101.1.10.1.33
futOspfDynamicBulkUpdStatus
Status of dynamic bulk update between active and dynamic OSPF instance.
scalarEnumeration.1.3.6.1.4.1.10876.101.1.10.1.34
futOspfStanbyHelloSyncCount
Total number of hello packets synced.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.10876.101.1.10.1.35
futOspfStanbyLsaSyncCount
Total number of LSAs synced.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.10876.101.1.10.1.36
futOspfExtTraceLevel
This object is used to define level of trace required for OSPF Extension. Levels are defined as follows. 0x00000100 -- Restart Module. 0x00000200 -- Helper Module. 0x00000400 -- …
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.10.1.37
futospfRouterIdPermanence
This variable displays the status of the ospfRouterId. 'dynamic' and 'permanent' refer to how the ospfRouterId is derived. This object …
scalarEnumeration.1.3.6.1.4.1.10876.101.1.10.1.38
futOspfBfdStatus
This object is to enable/disable BFD feature in OSPF.By default is enabled. If it is disabled OSPF will not register with BFD for neighbor IP path monitoring
scalarEnumeration.1.3.6.1.4.1.10876.101.1.10.1.39
futOspfPktsDisd
This gives the Total no. of Packets Discarded.
scalarSNMPv2-SMICounter32.1.3.6.1.4.1.10876.101.1.10.1.4
futOspfBfdAllIfState
This object is to enable/disable BFD for all OSPF interfaces By default it is disabled. If it is enabled, OSPF will register with BFD for neighbor IP path monitoring, when the OSP…
scalarEnumeration.1.3.6.1.4.1.10876.101.1.10.1.40
futOspfRFC1583Compatibility
Controls the preference rules, when choosing among multiple AS external LSAs advertising the same destination. When set to enabled, the preference rules remain those specified by…
scalarOSPF-MIBStatus.1.3.6.1.4.1.10876.101.1.10.1.5
futOspfMaxAreas deprecated
This gives the maximum number of areas.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.10.1.6
futOspfMaxLSAperArea deprecated
This gives the maximum number of LSAs in each area.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.10.1.7
futOspfMaxExtLSAs deprecated
This gives the maximum number of AS-EXT LSAs in the router's LSDB.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.10.1.8
futOspfMaxSelfOrgLSAs deprecated
This gives the maximum number of Self Originated LSAs that can be geneated by the router.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.10.1.9