fsMsdpNumSACacheEntries
SUPERMICRO-MSDP-MIB ·
.1.3.6.1.4.1.10876.101.2.61.1.5
Object
scalar
SNMPv2-SMIGauge32
The total number of entries in the SA Cache table of MSDP.
Context
- MIB
- SUPERMICRO-MSDP-MIB
- OID
.1.3.6.1.4.1.10876.101.2.61.1.5- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- fsMsdp
- Siblings
- 17
Syntax
SNMPv2-SMIGauge32
- Source
- SNMPv2-SMIGauge32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMsdpTraps | node | - | .1.3.6.1.4.1.10876.101.2.61.1.0 |
| fsMsdpTraceLevel This is used to enable Trace Statements in MSDP Module.
A four byte integer value is specified for enabling the level
of tracing.Each Bit in the four byte integer variable represe… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.2.61.1.1 |
| fsMsdpPeerCount This indicates the number of configured Peers. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.2.61.1.10 |
| fsMsdpPeerTable The (conceptual) table listing the MSDP speaker's peers. This table
is common for IPv4 and IPv6 Peers | table | - | .1.3.6.1.4.1.10876.101.2.61.1.11 |
| fsMsdpSACacheTable The (conceptual) table listing the MSDP SA advertisements
currently in the MSDP speaker's cache. | table | - | .1.3.6.1.4.1.10876.101.2.61.1.12 |
| fsMsdpMeshGroupTable The (conceptual) table listing MSDP Mesh Group
configuration. | table | - | .1.3.6.1.4.1.10876.101.2.61.1.13 |
| fsMsdpRPTable The (conceptual) table listing MSDP RP Address
configurations. This address is used MSDP SA messages
as a Initiator RP. | table | - | .1.3.6.1.4.1.10876.101.2.61.1.14 |
| fsMsdpPeerFilterTable The (conceptual) table listing MSDP Peer filtering
configurations. The Peer connections can be accepted
or denied based on this filter configuration. | table | - | .1.3.6.1.4.1.10876.101.2.61.1.15 |
| fsMsdpSARedistributionTable The (conceptual) table listing MSDP SA filtering
configurations. | table | - | .1.3.6.1.4.1.10876.101.2.61.1.16 |
| fsMsdpRtrId The MIB object fsMsdpRtrId,is the configured Router-Id for the
router.This ID is obtained from IP module | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.10876.101.2.61.1.17 |
| fsMsdpIPv4AdminStat The state of IPv4 MSDP on this MSDP speaker- globally enabled
or disabled. By default MSDP for IPv4 is disabled | scalar | Enumeration | .1.3.6.1.4.1.10876.101.2.61.1.2 |
| fsMsdpIPv6AdminStat The state of IPv6 MSDP on this MSDP speaker - globally enabled
or disabled. By default MSDP for IPv6 is disabled | scalar | Enumeration | .1.3.6.1.4.1.10876.101.2.61.1.3 |
| fsMsdpCacheLifetime The lifetime given to SA cache entries when created or
refreshed. This is the [SG-State-Period] in the MSDP
spec. A value of 0 means no SA caching is done by this
MSDP speaker.
… | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.10876.101.2.61.1.4 |
| fsMsdpMaxPeerSessions It defines the Maximum number of MSDP Peer sessions (TCP sessions)
that would be allowed simultaneously. | scalar | Integer32 | .1.3.6.1.4.1.10876.101.2.61.1.6 |
| fsMsdpMappingComponentId It indicates the MRP(PIM) component on which the MSDP should work.
ie. Whenever the (*,G) Join is received in the
configured PIM compoment and MSDP is enabled, SA cache entry wil… | scalar | Integer32 | .1.3.6.1.4.1.10876.101.2.61.1.7 |
| fsMsdpListenerPort MSDP listens on this port for the TCP connection between
the remote peers. This port change will be effective for the
forthcoming connections, however the old Peers with old TCP
… | scalar | Integer32 | .1.3.6.1.4.1.10876.101.2.61.1.8 |
| fsMsdpPeerFilter This is the status of peer filter globally configured. This can
be Accept all peers or Deny all Peers. If the status is acceptall,
all the Peer connections are accepted if no rou… | scalar | Enumeration | .1.3.6.1.4.1.10876.101.2.61.1.9 |