fsMplsRsvpTeAtmMinVci
SUPERMICRO-MPLS-RSVP-TE-MIB ·
.1.3.6.1.4.1.10876.101.1.13.2.1.1.1.7
Object
column
r/w
AtmVcIdentifier
The minimum VCI number configured for this range.
Context
- MIB
- SUPERMICRO-MPLS-RSVP-TE-MIB
- OID
.1.3.6.1.4.1.10876.101.1.13.2.1.1.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMplsRsvpTeIfEntry
- Table
- fsMplsRsvpTeIfTable
- Siblings
- 23
Syntax
AtmVcIdentifier
- Source
- AtmVcIdentifier
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMplsRsvpTeIfIndex The interface index by which the row
in this table is identified. A row is
created in this table when a row is created
in the rsvpIfTable, and labelled traffic will
be handled ove… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.1 |
| fsMplsRsvpTeIfMtu The MTU value associated with this interface . | column | Integer32 | .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.10 |
| fsMplsRsvpTeIfUdpNbrs The number of neighbors perceived to be using
only the RSVP UDP Encapsulation. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.11 |
| fsMplsRsvpTeIfIpNbrs The number of neighbors perceived to be using
only the RSVP IP Encapsulation. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.12 |
| fsMplsRsvpTeIfNbrs The number of neighbors currently perceived;
this will exceed rsvpIfIpNbrs + rsvpIfUdpNbrs by the
number of neighbors using both encapsulations. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.13 |
| fsMplsRsvpTeIfRefreshMultiple The value of the RSVP value 'K', which is the
number of refresh intervals which must elapse
(minimum) before a PATH or RESV message which
is not being refreshed will be aged … | column | Integer32 | .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.14 |
| fsMplsRsvpTeIfTTL The value of SEND_TTL used on this interface
for messages this node originates. If set to
zero, the node determines the TTL via other
means. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.15 |
| fsMplsRsvpTeIfRefreshInterval The value of the RSVP value 'R', which is the
minimum period between refresh transmissions of
a given PATH or RESV message on an interface. | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.16 |
| fsMplsRsvpTeIfRouteDelay The approximate period from the time a route
is changed to the time a resulting message appears on the interface. | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.17 |
| fsMplsRsvpTeIfUdpRequired If TRUE, manual configuration forces the use
of UDP encapsulation on the interface. If
FALSE, UDP encapsulation is only used if fsMplsRsvpTeI-
fUdpNbrs is not zero. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.18 |
| fsMplsRsvpTeIfHelloSupported Indicates whether the interface supports Hello message or not.
When set to 'true' the interface is set to support Hello message.
The interface will not be set to support Hello mes… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.19 |
| fsMplsRsvpTeIfLblSpace Specifies the type of the interface, as Ethernet, or
ATM or FR | column | Enumeration | .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.2 |
| fsMplsRsvpTeIfLinkAttr Link Attributes associated with the interface as defined in
section 4.7.4 of RFC 3209, Extensions to RSVP for LSP Tunnels,
Awduche et al, December 2001. | column | Integer32 | .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.20 |
| fsMplsRsvpTeIfStatus 'active' on interfaces that are configured for RSVP.
CreateAndGo is not supported | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.21 |
| fsMplsRsvpTeIfPlrId Indicates the PLR Id to be configured for this interface
for supporting FRR Feature. | column | MplsLsrIdentifier | .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.22 |
| fsMplsRsvpTeIfAvoidNodeId Indicates the IP Address of the Node to be avoided while
protecting this interface for supporting feature. | column | MplsLsrIdentifier | .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.23 |
| fsMplsRsvpTeIfStorageType The storage type for this conceptual row in the fsMplsRsvpTeIfTable.
Conceptual rows having the value 'permanent' need not allow
write-access to any columnar object in the row.
o… | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.24 |
| fsMplsRsvpTeIfLblType Specifies the type of the interface, as Ethernet, or
ATM or FR. Iface Type as FR is not supported | column | Enumeration | .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.3 |
| fsMplsRsvpTeAtmMergeCap Denotes the Merge Capability of this Interface.
VcMerge is currently not supported | column | Enumeration | .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.4 |
| fsMplsRsvpTeAtmVcDirection If the value of this object is 'biDirectional(0)',
a given VCI, within a given VPI, is used as a
label for both directions independently.
If the value of this objec… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.5 |
| fsMplsRsvpTeAtmMinVpi The minimum VPI number configured for this range. | column | AtmVpIdentifier | .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.6 |
| fsMplsRsvpTeAtmMaxVpi The maximum VPI number configured for this range. | column | AtmVpIdentifier | .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.8 |
| fsMplsRsvpTeAtmMaxVci The maximum VCI number configured for this range. | column | AtmVcIdentifier | .1.3.6.1.4.1.10876.101.1.13.2.1.1.1.9 |