fsMplsFrrActProtectionTuns

SUPERMICRO-MPLS-FRR-MIB · .1.3.6.1.4.1.10876.101.1.13.3.1.8
MIB view Table view

Object

scalar SNMPv2-SMIUnsigned32 
Indicates the number of bypass tunnels indicated in
mplsFrrConfProtectionTuns whose operStatus
is up(1) indicating that they are currently protecting
TE tunnels on this LSR using the FRR feature. This
object MUST return 0 if fsMplsFrrConstProtectionMethod
is set to oneToOneBackup(1).

Context

MIB
SUPERMICRO-MPLS-FRR-MIB
OID
.1.3.6.1.4.1.10876.101.1.13.3.1.8
Type
scalar
Access
readonly
Status
current
Parent
fsMplsFrrScalars
Siblings
15

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsMplsFrrDetourIncoming
The number of detour LSPs entering the device (greater than or equal to 0) if fsMplsFrrConstProtectionMethod is set to oneToOneBackup(1), or -1 if fsMplsFrrConstProtectionMethod i…
scalarInteger32.1.3.6.1.4.1.10876.101.1.13.3.1.1
fsMplsFrrRevertiveMode
Global revertive mode: The head-end LSR of each tunnel is responsible for reoptimizing the TE LSPs that used the failed resource. There are several potential reoptimization trigg…
scalarBits.1.3.6.1.4.1.10876.101.1.13.3.1.10
fsMplsFrrDetourMergingEnabled
Enables or disables FRR Detour Merging. Detour Merging is enabled by default. This is applicable for One-to-One Backup Method only.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.1.13.3.1.11
fsMplsFrrDetourEnabled
Enables or disables FRR Detour object handling. Detour object handling is enabled by default. This is applicable for One-to-One Backup Method only.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.1.13.3.1.12
fsMplsFrrCspfRetryInterval
The value of the CSPF retry interval, which is used to periodically send the CSPF calculation trigger until the valid CSPF calculation done. It is specified in milli seconds.
scalarSNMPv2-TCTimeInterval.1.3.6.1.4.1.10876.101.1.13.3.1.13
fsMplsFrrCspfRetryCount
This indicates the value of the CSPF retry count.
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.10876.101.1.13.3.1.14
fsMplsFrrNotifsEnabled
Enables or disables FRR notifications defined in this MIB module. Notifications are disabled by default.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.1.13.3.1.15
fsMplsFrrMakeAfterBreakEnabled
Enables or disables Make after break support for FRR Protected LSP. It is disabled by default.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.1.13.3.1.16
fsMplsFrrDetourOutgoing
The number of detour LSPs leaving the device (greater than or equal to 0) if fsMplsFrrConstProtectionMethod is set to oneToOneBackup(1), or -1 if fsMplsFrrConstProtectionMethod is…
scalarInteger32.1.3.6.1.4.1.10876.101.1.13.3.1.2
fsMplsFrrDetourOriginating
The number of detour LSPs originating at this PLR (greater than or equal to 0) if fsMplsFrrConstProtectionMethod is set to oneToOneBackup(1). This object MUST return -1 if the fs…
scalarInteger32.1.3.6.1.4.1.10876.101.1.13.3.1.3
fsMplsFrrSwitchover
The number of tunnel instances for which this LSR is the ingress that are currently using a detour or bypass LSP to reach their egress.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.13.3.1.4
fsMplsFrrConfIfs
Indicates the number of MPLS interfaces configured for protection by the FRR feature if fsMplsFrrConstProtectionMethod is set to facilityBackup(2), otherwise this value MUST retur…
scalarInteger32.1.3.6.1.4.1.10876.101.1.13.3.1.5
fsMplsFrrActProtectedIfs
Indicates the number of interfaces currently being protected by the FRR feature if fsMplsFrrConstProtectionMethod is set to facilityBackup(2), otherwise this value should return 0…
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.13.3.1.6
fsMplsFrrConfProtectionTuns
Indicates the number of bypass tunnels configured to protect TE tunnels on this LSR using the FRR feature if fsMplsFrrConstProtectionMethod is set to facilityBackup(2), otherwise …
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.13.3.1.7
fsMplsFrrActProtectedLSPs
Indicates the number of LSPs currently protected by the FRR feature where this device acts as the PLR for those LSPs. If fsMplsFrrConstProtectionMethod is set to facilityBackup(2)…
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.13.3.1.9