fsMIPbRstCVlanBridgeHoldTime

SUPERMICRO-MIPB-RSTP-MIB · .1.3.6.1.4.1.10876.101.1.134.1.2.1.7
MIB view Table view

Object

column SNMPv2-SMIInteger32 
This time value determines the interval length during which no more 
than two Configuration bridge PDUs shall be transmitted by this C-VLAN 
component, in units of hundredths of a second.

Context

MIB
SUPERMICRO-MIPB-RSTP-MIB
OID
.1.3.6.1.4.1.10876.101.1.134.1.2.1.7
Type
column
Access
readonly
Status
current
Parent
fsMIPbRstCVlanBridgeEntry
Table
fsMIPbRstCVlanBridgeTable
Siblings
14

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsMIPbRstPort
This object always indicates the port which is of type CEP. CEP port will be the index of the CVLAN Spanning tree
columnInteger32.1.3.6.1.4.1.10876.101.1.134.1.2.1.1
fsMIPbRstCVlanStpHelloTime
The amount of time between the transmission of Configuration bridge PDUs by this C-VLAN component on any port when it is the root of the spanning tree or trying to become so, in…
columnBRIDGE-MIBTimeout.1.3.6.1.4.1.10876.101.1.134.1.2.1.10
fsMIPbRstCVlanStpMaxAge
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value th…
columnBRIDGE-MIBTimeout.1.3.6.1.4.1.10876.101.1.134.1.2.1.11
fsMIPbRstCVlanStpForwardDelay
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines …
columnBRIDGE-MIBTimeout.1.3.6.1.4.1.10876.101.1.134.1.2.1.12
fsMIPbRstCVlanStpTopChanges
The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.10876.101.1.134.1.2.1.13
fsMIPbRstCVlanStpTimeSinceTopologyChange
The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
columnSNMPv2-SMITimeTicks.1.3.6.1.4.1.10876.101.1.134.1.2.1.14
fsMIPbRstCVlanStpDebugOption
This object is used to enable customer spanning-tree Debug Statements in the STP Module. A FOUR BYTE integer is used for enabling the level of debugging. Each BIT…
columnInteger32.1.3.6.1.4.1.10876.101.1.134.1.2.1.15
fsMIPbRstCVlanBridgeId
The Bridge-Identifier as used in the Spanning Tree Protocol operation in the C-VLAN component to uniquely identify a bridge. Bridge Mac address field in this object will be the MA…
columnBRIDGE-MIBBridgeId.1.3.6.1.4.1.10876.101.1.134.1.2.1.2
fsMIPbRstCVlanBridgeDesignatedRoot
The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this C-VLAN component. This value is used as the Root Identifie…
columnBRIDGE-MIBBridgeId.1.3.6.1.4.1.10876.101.1.134.1.2.1.3
fsMIPbRstCVlanBridgeRootCost
The cost of the path to the root as seen from this C-VLAN component bridge.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.134.1.2.1.4
fsMIPbRstCVlanBridgeMaxAge
The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of d…
columnBRIDGE-MIBTimeout.1.3.6.1.4.1.10876.101.1.134.1.2.1.5
fsMIPbRstCVlanBridgeHelloTime
The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may retu…
columnBRIDGE-MIBTimeout.1.3.6.1.4.1.10876.101.1.134.1.2.1.6
fsMIPbRstCVlanBridgeForwardDelay
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the valu…
columnBRIDGE-MIBTimeout.1.3.6.1.4.1.10876.101.1.134.1.2.1.8
fsMIPbRstCVlanBridgeTxHoldCount
The value used by the Port Transmit state machine to limit the maximum transmission rate.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.134.1.2.1.9