fsMIBgp4mpeIsPeerDamped
SUPERMICRO-MI-BGP-MIB ·
.1.3.6.1.4.1.10876.101.2.77.20.1.40
Object
column
Enumeration
This MIB object specifies the PeerDamped Status. If it is enabled, it denotes that the peer is in damped state. If it is disabled, it denotes that either the peer has recovered from the damped state or not entered into the Damped state. If enabled and if the IdleHold Timer Threshold value is exceeded, issue Manual Stop, reset the fsMIBgp4mpePeerTcpCurrentConnectRetryCnt value to zero and disable the fsMIBgp4mpePeerAllowAutomaticStart.
Context
- MIB
- SUPERMICRO-MI-BGP-MIB
- OID
.1.3.6.1.4.1.10876.101.2.77.20.1.40- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fsMIBgp4MpeBgpPeerEntry
- Table
- fsMIBgp4MpeBgpPeerTable
- Siblings
- 45
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIBgp4mpebgpPeerIdentifier The BGP Identifier of this entry's BGP peer. | column | SUPERMICRO-BGP-MIBInetAddress | .1.3.6.1.4.1.10876.101.2.77.20.1.1 |
| fsMIBgp4mpebgpPeerRemotePort The remote port for the TCP connection between the BGP peers.
Note that the objects bgpPeerLocalAddr, bgpPeerLocalPort,
bgpPeerRemoteAddr and bgpPeerRemotePort provide the appropr… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.77.20.1.10 |
| fsMIBgp4mpebgpPeerRemoteAs The remote autonomous system number. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.77.20.1.11 |
| fsMIBgp4mpebgpPeerInUpdates The number of BGP UPDATE messages received on this connection.
This object should be initialized to zero (0) when the connection
is established. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.2.77.20.1.12 |
| fsMIBgp4mpebgpPeerOutUpdates The number of BGP UPDATE messages transmitted on this connection.
This object should be initialized to zero (0) when the connection
is established. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.2.77.20.1.13 |
| fsMIBgp4mpebgpPeerInTotalMessages The total number of messages received from the remote peer on this
connection. This object should be initialized to zero when the
connection is established. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.2.77.20.1.14 |
| fsMIBgp4mpebgpPeerOutTotalMessages The total number of messages transmitted to the remote peer on
this connection. This object should be initialized to zero when
the connection is established. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.2.77.20.1.15 |
| fsMIBgp4mpebgpPeerLastError The last error code and subcode seen by this peer on this connection.
If no error has occurred, this field is zero. Otherwise, the first
byte of this two byte OCTET STRING contai… | column | OctetString | .1.3.6.1.4.1.10876.101.2.77.20.1.16 |
| fsMIBgp4mpebgpPeerFsmEstablishedTransitions The total number of times the BGP FSM transitioned into the
established state. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.10876.101.2.77.20.1.17 |
| fsMIBgp4mpebgpPeerFsmEstablishedTime This timer indicates how long (in seconds) this peer has been in the
Established state or how long since this peer was last in the
Established state. It is set to zero when a new… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.10876.101.2.77.20.1.18 |
| fsMIBgp4mpebgpPeerConnectRetryInterval Time interval in seconds for the ConnectRetry timer. The suggested
value for this timer is 120 seconds. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.77.20.1.19 |
| fsMIBgp4mpebgpPeerRemoteAddrType Type of the remote peer | column | SUPERMICRO-BGP-MIBInetAddressType | .1.3.6.1.4.1.10876.101.2.77.20.1.2 |
| fsMIBgp4mpebgpPeerHoldTime Time interval in seconds for the Hold Timer established with the
peer. The value of this object is calculated by this BGP speaker
by using the smaller of the value in bgpPeerHold… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.77.20.1.20 |
| fsMIBgp4mpebgpPeerKeepAlive Time interval in seconds for the KeepAlive timer established with
the peer. The value of this object is calculated by this BGP
speaker such that, when compared with bgpPeerHoldTi… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.77.20.1.21 |
| fsMIBgp4mpebgpPeerHoldTimeConfigured Time interval in seconds for the Hold Time configured for this
BGP speaker with this peer. This value is placed in an OPEN
message sent to this peer by this BGP speaker, and is c… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.77.20.1.22 |
| fsMIBgp4mpebgpPeerKeepAliveConfigured Time interval in seconds for the
KeepAlive timer configured for this BGP
speaker with this peer. The value of this
object will only determine the
KEEPALIVE messages' frequency re… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.77.20.1.23 |
| fsMIBgp4mpebgpPeerMinASOriginationInterval Time interval in seconds for the
MinASOriginationInterval timer.
The suggested value for this timer is 15
seconds. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.77.20.1.24 |
| fsMIBgp4mpebgpPeerMinRouteAdvertisementInterval Time interval in seconds for the
MinRouteAdvertisementInterval timer.
The suggested value for this timer is 30
seconds. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.77.20.1.25 |
| fsMIBgp4mpebgpPeerInUpdateElapsedTime Elapsed time in seconds since the last BGP
UPDATE message was received from the peer.
Each time bgpPeerInUpdates is incremented,
the value of this object is set to zero
(0). | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.10876.101.2.77.20.1.26 |
| fsMIBgp4mpebgpPeerEndOfRIBMarkerSentStatus This object indicates that whether the End-Of-RIB marker sent to peer or not | column | Enumeration | .1.3.6.1.4.1.10876.101.2.77.20.1.27 |
| fsMIBgp4mpebgpPeerEndOfRIBMarkerReceivedStatus This object indicates that whether the End-Of-RIB marker received from peer or not | column | Enumeration | .1.3.6.1.4.1.10876.101.2.77.20.1.28 |
| fsMIBgp4mpebgpPeerRestartMode This object indicates whether the peer BGP speaker is restarting speaker or receiving speaker or not having GR capability | column | Enumeration | .1.3.6.1.4.1.10876.101.2.77.20.1.29 |
| fsMIBgp4mpebgpPeerLocalAs It is used to configure as Local As per peer | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.77.20.1.3 |
| fsMIBgp4mpePeerRestartTimeInterval This is the time (in seconds) received from peer through GR capability of open message. This is used in receiving speaker to make sure that the restarting speaker restarted within… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.77.20.1.30 |
| fsMIBgp4mpePeerAllowAutomaticStart This MIB object specifies whether BGP session with the associated peer
can be started automatically. This object when set to 'disabled',
requires manual start for initiating BGP s… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.77.20.1.31 |
| fsMIBgp4mpePeerAllowAutomaticStop This MIB object specifies whether a BGP connection needs to be
automatically stopped after a TCP connect-retry count value specified
by MIB object 'fsMIBgp4mpePeerTcpConnectRetryC… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.77.20.1.32 |
| fsMIBgp4mpebgpPeerIdleHoldTimeConfigured IdleHoldTime specifies the length of time the BGP peer is held in the
Idle state prior to allowing the next automatic restart.
The IdleHoldTime is configured only when the
fsMIBgp… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.77.20.1.33 |
| fsMIBgp4mpeDampPeerOscillations The DampPeerOscillations option specifies that the implementation
engages additional logic to damp the oscillations of BGP peers in
the face of series of automatic start and autom… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.77.20.1.34 |
| fsMIBgp4mpePeerDelayOpen This MIB object allows configuration option to enable/disable delay
in sending of OPEN messages to the BGP peer for a specific time period
(DelayOpenTime). The delay allows the re… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.77.20.1.35 |
| fsMIBgp4mpebgpPeerDelayOpenTimeConfigured The DelayOpen time specifies the amount of time the BGP Peer should
delay in sending the OPEN message to the remote peer. If the
fsMIBgp4mpePeerDelayOpen option is enabled, the De… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.77.20.1.36 |
| fsMIBgp4mpePeerPrefixUpperLimit BGP speaker imposes a locally-configured, upper bound on the number of
address prefixes the speaker is willing to accept from a neighbor. The
default value is calculated as the fo… | column | Integer32 | .1.3.6.1.4.1.10876.101.2.77.20.1.37 |
| fsMIBgp4mpePeerTcpConnectRetryCnt This counter denotes the Maximum number of times the BGP Peer has
tried to issue a TCP-Connect with its neighboring peers.
The default value for the counter is set as 5. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.77.20.1.38 |
| fsMIBgp4mpePeerTcpCurrentConnectRetryCnt This counter denotes the number of times the BGP Peer has tried to
issue a TCP-Connect with its neighboring peers. It is an internal value.
It increments for each Autostop event. … | column | Integer32 | .1.3.6.1.4.1.10876.101.2.77.20.1.39 |
| fsMIBgp4mpebgpPeerState The BGP peer connection state. | column | Enumeration | .1.3.6.1.4.1.10876.101.2.77.20.1.4 |
| fsMIBgp4mpePeerSessionAuthStatus This object indicates whether peer-session is TCP MD5/TCP-AO
authenticated or not. If no session is established yet, its value is
no-session | column | Enumeration | .1.3.6.1.4.1.10876.101.2.77.20.1.41 |
| fsMIBgp4mpePeerTCPAOKeyIdInUse Key id of the MKT which is used by the TCP session of the peer,
this field will be valid only when fsMIBgp4mpePeerSessionAuthStatus
has value authenticatedTcpAo | column | Integer32 | .1.3.6.1.4.1.10876.101.2.77.20.1.42 |
| fsMIBgp4mpePeerTCPAOAuthNoMKTDiscard Discard packet for the peer, if packets are received with TCP-AO
and no matching MKT is found, default value is accept | column | Enumeration | .1.3.6.1.4.1.10876.101.2.77.20.1.43 |
| fsMIBgp4mpePeerTCPAOAuthICMPAccept Accept ICMPv4 type 3 & ICMPv6 type 1 messages for the TCP-AO
authenticated peer, default value is ignore | column | Enumeration | .1.3.6.1.4.1.10876.101.2.77.20.1.44 |
| fsMIBgp4mpePeerIpPrefixNameIn This object is used to configure the IP Prefix list name in IN direction for this peer entry. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10876.101.2.77.20.1.45 |
| fsMIBgp4mpePeerIpPrefixNameOut This object is used to configure the IP Prefix list name in OUT direction for this peer entry. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10876.101.2.77.20.1.46 |
| fsMIBgp4mpebgpPeerAdminStatus The desired state of the BGP connection. A transition from
'stop' to 'start' will cause the BGP Start Event to be generated.
A transition from 'start' to 'stop' will cause the BG… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.77.20.1.5 |
| fsMIBgp4mpebgpPeerNegotiatedVersion The negotiated version of BGP running between the two peers. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.2.77.20.1.6 |
| fsMIBgp4mpebgpPeerLocalAddr The local IP address of this entry's BGP connection. | column | SUPERMICRO-BGP-MIBInetAddress | .1.3.6.1.4.1.10876.101.2.77.20.1.7 |
| fsMIBgp4mpebgpPeerLocalPort The local port for the TCP connection between the BGP peers. | column | Integer32 | .1.3.6.1.4.1.10876.101.2.77.20.1.8 |
| fsMIBgp4mpebgpPeerRemoteAddr The remote IP address of this entry's BGP peer. | column | SUPERMICRO-BGP-MIBInetAddress | .1.3.6.1.4.1.10876.101.2.77.20.1.9 |