fsMIBgp4GRRestartTimeInterval
SUPERMICRO-MI-BGP-MIB ·
.1.3.6.1.4.1.10876.101.2.77.6
Object
scalar
r/w
Integer32
This is the estimated time (in seconds) it will take for the BGP
session to be re-established after a restart. Suggested default value
should be less than or equal to Hold Time carried in open message.
The GR restart time interval configured can be used only for the new peers
sessions established and not for the already established peer sessions
Context
- MIB
- SUPERMICRO-MI-BGP-MIB
- OID
.1.3.6.1.4.1.10876.101.2.77.6- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- fsMIBgp
- Siblings
- 43
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-4096
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMIBgp4GlobalTraceDebug This object is used to enable global trace for the BGP module.
A four byte integer value is specified for enabling
the level of tracing. Each Bit in the four byte integer variable… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.2.77.1 |
| fsMIBgp4GRMode This object indicates whether the BGP speaker is restarting speaker
or receiving speaker. | scalar | Enumeration | .1.3.6.1.4.1.10876.101.2.77.10 |
| fsMIBgp4RestartSupport The router's support for BGP graceful restart Options include:
no restart support, only planned restarts, or both planned and unplanned
restarts. This object is persistent and whe… | scalar | Enumeration | .1.3.6.1.4.1.10876.101.2.77.11 |
| fsMIBgp4RestartStatus Current status of BGP graceful restart, it indicates whether the speaker
restarted or not if it is restarted whether it is a planned restart or unplanned restart | scalar | Enumeration | .1.3.6.1.4.1.10876.101.2.77.12 |
| fsMIBgp4ForwardingPreservation This object indicates whether the forwarding plane is preserved during restart or not | scalar | Enumeration | .1.3.6.1.4.1.10876.101.2.77.13 |
| fsMIBgpContextTable This context table contains the global parameters of BGP
that is required to be configured for each context. | table | - | .1.3.6.1.4.1.10876.101.2.77.14 |
| fsMIBgp4RRDMetricTable A table describing the configuration of metric values to
the redistributed routes. | table | - | .1.3.6.1.4.1.10876.101.2.77.15 |
| fsMIBgpComm | node | - | .1.3.6.1.4.1.10876.101.2.77.16 |
| fsMIBgpExtComm | node | - | .1.3.6.1.4.1.10876.101.2.77.17 |
| fsMIBgp4TCPMD5Auth | node | - | .1.3.6.1.4.1.10876.101.2.77.18 |
| fsMIBgpAsc | node | - | .1.3.6.1.4.1.10876.101.2.77.19 |
| fsMIBgp4LocalAs This is Global local autonomous system number. | scalar | Unsigned32 | .1.3.6.1.4.1.10876.101.2.77.2 |
| fsMIBgp4MpeBgpPeerTable BGP peer table. This table contains, one entry per BGP peer,
information about the connections with BGP peers. | table | - | .1.3.6.1.4.1.10876.101.2.77.20 |
| fsMIBgp4MpeBgp4PathAttrTable The BGP-4 Received Path Attribute Table
contains information about paths to
destination networks received from all
BGP4 peers. | table | - | .1.3.6.1.4.1.10876.101.2.77.21 |
| fsMIBgp4MpePeerExtTable BGP Peer Extension Table. The entries in the table specifies
the additional features supported for a peer by futureBGP4
Speaker in addition to the features specified as in bgpPeer… | table | - | .1.3.6.1.4.1.10876.101.2.77.22 |
| fsMIBgp4MpeMEDTable BGP4 MED table. This table contains the MED values that are to
be assigned to routes. | table | - | .1.3.6.1.4.1.10876.101.2.77.23 |
| fsMIBgp4MpeLocalPrefTable BGP Local Preference table. This table contains,
the value that is to be assigned to the Local
Preference attibute. | table | - | .1.3.6.1.4.1.10876.101.2.77.24 |
| fsMIBgp4MpeUpdateFilterTable BGP Update Filter Table. This table contains
Rules to filter out updates based on the AS from
which it is received, NLRI and AS through which it
had passed. | table | - | .1.3.6.1.4.1.10876.101.2.77.25 |
| fsMIBgp4MpeAggregateTable BGP Aggregate Table. The entries in the table
specifies the IP address based on which the routing
information has to be aggregated. | table | - | .1.3.6.1.4.1.10876.101.2.77.26 |
| fsMIBgp4MpeImportRouteTable Non-BGP routes imported into the BGP RIB can be viewed through this table.
Also allows importing a static route into BGP.After updating the RIB tree,
if there is any change in the… | table | - | .1.3.6.1.4.1.10876.101.2.77.27 |
| fsMIBgp4MpeFsmTransitionHistTable Gets FSM transitions history per peer | table | - | .1.3.6.1.4.1.10876.101.2.77.28 |
| fsMIBgp4MpeRfd | node | - | .1.3.6.1.4.1.10876.101.2.77.29 |
| fsMIBgp4MaxPeerEntry The Maximum number of peers supported by BGP | scalar | Integer32 | .1.3.6.1.4.1.10876.101.2.77.3 |
| fsMIBgp4MpeComm | node | - | .1.3.6.1.4.1.10876.101.2.77.30 |
| fsMIBgp4MpeExtComm | node | - | .1.3.6.1.4.1.10876.101.2.77.31 |
| fsMIBgp4MpeCaps | node | - | .1.3.6.1.4.1.10876.101.2.77.32 |
| fsMIBgp4MpeRtRefresh | node | - | .1.3.6.1.4.1.10876.101.2.77.33 |
| fsMIBgp4MpeSoftReconfigOut | node | - | .1.3.6.1.4.1.10876.101.2.77.34 |
| fsMIBgp4MpePrefixCountersTable Additional per-peer, per AFI/SAFI counters for prefixes | table | - | .1.3.6.1.4.1.10876.101.2.77.35 |
| fsMIBgp4DistInOutRouteMap | node | - | .1.3.6.1.4.1.10876.101.2.77.36 |
| fsMIBgp4Notification | node | - | .1.3.6.1.4.1.10876.101.2.77.37 |
| fsMIBgp4NeighborRouteMap | node | - | .1.3.6.1.4.1.10876.101.2.77.38 |
| fsMIBgp4PeerGroupTable A table for configuring the bgp peer groups. Configuring
a property for the peer group copies it to all the peers
present in the peer group. | table | - | .1.3.6.1.4.1.10876.101.2.77.39 |
| fsMIBgp4MaxNoofRoutes It represents the maximum number of routes in the routing table | scalar | Integer32 | .1.3.6.1.4.1.10876.101.2.77.4 |
| fsMIBgp4PeerGroupListTable A table for adding/removing the bgp peers to a peer group. | table | - | .1.3.6.1.4.1.10876.101.2.77.40 |
| fsMIBgp4RestartReason The reason for restart for the Restarting Router.
Options include: unknown,softwarerestart,swreloadupgrade,
switchtoredundant. This object is persistent and when written
the en… | scalar | Enumeration | .1.3.6.1.4.1.10876.101.2.77.41 |
| fsMIBgp4TCPMKTAuth | node | - | .1.3.6.1.4.1.10876.101.2.77.42 |
| fsMIBgp4TCPAOAuthPeer | node | - | .1.3.6.1.4.1.10876.101.2.77.43 |
| fsMIBgp4ORFListTable A table for adding/removing Outbound Route Filter entries received from the peer | table | - | .1.3.6.1.4.1.10876.101.2.77.44 |
| fsMIBgp4GRAdminStatus This object is used to enable or disable GR capability in BGP speaker. | scalar | Enumeration | .1.3.6.1.4.1.10876.101.2.77.5 |
| fsMIBgp4RestartExitReason Describes the outcome of the last attempt at a graceful restart.
If the value is 'none': no restart has yet been attempted.
'inProgress': a restart attempt is currently underway.… | scalar | Enumeration | .1.3.6.1.4.1.10876.101.2.77.7 |
| fsMIBgp4GRSelectionDeferralTimeInterval This interval is the upper bound on the amount of time a router
defers its route selection. The value of this timer should be large
enough, so as to provide all the peers of the R… | scalar | Integer32 | .1.3.6.1.4.1.10876.101.2.77.8 |
| fsMIBgp4GRStaleTimeInterval This interval is the upper bound on the amount of time a router retains
the stale routes.
The GR stale time interval configured can be used only for the new peers
sess… | scalar | Integer32 | .1.3.6.1.4.1.10876.101.2.77.9 |