fsUniCVlanId
SUPERMICRO-MEF-MIB ·
.1.3.6.1.4.1.10876.101.2.71.2.1.1.8
Object
A 12-bit UNI CE-VID to be used for untagged frames received
Context
- MIB
- SUPERMICRO-MEF-MIB
- OID
.1.3.6.1.4.1.10876.101.2.71.2.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsUniEntry
- Table
- fsUniTable
- Siblings
- 18
Syntax
Q-BRIDGE-MIBVlanId
- Source
- Q-BRIDGE-MIBVlanId
- Base type
Integer32
Values & Constraints
Type Constraints
range: 1..4094
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsUniId The UNI Identifier is independent of the EVCs at the UNI.
It is assigned to the UNI by the Service Provider. It must
be a string and the string may have any value. The UNI
Iden… | column | OctetString | .1.3.6.1.4.1.10876.101.2.71.2.1.1.1 |
| fsUniL2CPDot1x The object to specify whether to discard or peer or tunnel
the Dot1x packets received on this port. | column | UniL2CPStatus | .1.3.6.1.4.1.10876.101.2.71.2.1.1.10 |
| fsUniL2CPLacp The object to specify whether to discard or peer or tunnel
the LACP packets received on this port. | column | UniL2CPStatus | .1.3.6.1.4.1.10876.101.2.71.2.1.1.11 |
| fsUniL2CPStp The object to specify whether to discard or peer or tunnel
the STP packets received on this port. | column | UniL2CPStatus | .1.3.6.1.4.1.10876.101.2.71.2.1.1.12 |
| fsUniL2CPGvrp The object to specify whether to discard or peer or tunnel
the GVRP packets received on this port. | column | UniL2CPStatus | .1.3.6.1.4.1.10876.101.2.71.2.1.1.13 |
| fsUniL2CPGmrp The object to specify whether to discard or peer or tunnel
the GMRP packets received on this port. | column | UniL2CPStatus | .1.3.6.1.4.1.10876.101.2.71.2.1.1.14 |
| fsUniL2CPMvrp The object to specify whether to discard or peer or tunnel
the MVRP packets received on this port. | column | UniL2CPStatus | .1.3.6.1.4.1.10876.101.2.71.2.1.1.15 |
| fsUniL2CPMmrp The object to specify whether to discard or peer or tunnel
the MMRP packets received on this port. | column | UniL2CPStatus | .1.3.6.1.4.1.10876.101.2.71.2.1.1.16 |
| fsUniL2CPLldp The object to specify whether to discard or peer or tunnel
the LLDP packets received on this port. | column | UniL2CPStatus | .1.3.6.1.4.1.10876.101.2.71.2.1.1.17 |
| fsUniL2CPElmi The object to specify whether to discard or peer or tunnel
the ELMI packets received on this port. | column | UniL2CPStatus | .1.3.6.1.4.1.10876.101.2.71.2.1.1.18 |
| fsUniRowStatus Row Status for the UNI table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.10876.101.2.71.2.1.1.19 |
| fsUniPhysicalMedium It always return ethernetCsmacd (6). | column | IANAifType-MIBIANAifType | .1.3.6.1.4.1.10876.101.2.71.2.1.1.2 |
| fsUniSpeed Speed is bits per second,It is dependent on the ethernet type.
The speed should be one of the give below.
- 10 Mbps
- 100 Mbps
- 10 or 100 Mbps Auto Negotiation
- 1 Gbps
- 10 Gbp… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.10876.101.2.71.2.1.1.3 |
| fsUniMode This mode defines the type of communication between the CE and UNI. | column | Enumeration | .1.3.6.1.4.1.10876.101.2.71.2.1.1.4 |
| fsUniMacLayer It should return IEEE 802.3 - 2005 | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.10876.101.2.71.2.1.1.5 |
| fsUniMtu The size of the largest packet which can be sent and received
on the interface, specified in octets.For interfaces that
are used for transmitting network datagrams, this is the
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.2.71.2.1.1.6 |
| fsUniServiceMultiplexingBundling This object specifies the UNI service attributes.
service-Multiplexing :
This bit specifies whether the UNI supports multiple
EVCs. Point-to-Point EVCs and Multipo… | column | Bits | .1.3.6.1.4.1.10876.101.2.71.2.1.1.7 |
| fsUniMaxEvcs This attribute defines the maximum number of EVCs that the UNI
can support. It MUST have a value of at least one. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.2.71.2.1.1.9 |