fsMefMepAvailabilityStatus
SUPERMICRO-MEF-MIB ·
.1.3.6.1.4.1.10876.101.2.71.7.6.1.1
Object
An Enumerated value set to 'start' to initiate Availability Measurement
and 'stop' to stop Availability Measurement.
'ready' and 'notReady' indicates whether Availability Measurement
can be initiated or not.
Note: User can not set to 'ready' or 'notReady'.
Context
- MIB
- SUPERMICRO-MEF-MIB
- OID
.1.3.6.1.4.1.10876.101.2.71.7.6.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsMefMepAvailabilityEntry
- Table
- fsMefMepAvailabilityTable
- Siblings
- 17
Syntax
SUPERMICRO-ECFM-Y1731-MI-MIBFsY1731TransmitStatus
- Source
- SUPERMICRO-ECFM-Y1731-MI-MIBFsY1731TransmitStatus
- Base type
Enumeration
Values & Constraints
Type Values
0 | ready |
1 | notReady |
2 | start |
3 | stop |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsMefMepAvailabilityDestMepId An indication of the Target MAC Address Field to be
transmitted:
The Maintenance association End Point Identifier of
another MEP in the same Maintenance Association
This address w… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.10876.101.2.71.7.6.1.10 |
| fsMefMepAvailabilityDestIsMepId True indicates that MEPID of the target MEP is used for
LMM transmission during Availability Measurement.
False indicates that unicast destination MAC address of the
target MEP is… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.71.7.6.1.11 |
| fsMefMepAvailabilityType defStatic indicates that the algorithm for Availability Measurement
is static window algorithm. The availability measurement will be
conducted as per MEF 10.2
(Section 6.9.7. Av… | column | SUPERMICRO-ECFM-Y1731-MI-MIBFsY1731AvailabilityType | .1.3.6.1.4.1.10876.101.2.71.7.6.1.12 |
| fsMefMepAvailabilitySchldDownInitTime Time when Scheduled down time is initiated, denotes the beginning of
time interval agreed upon by both the Subscriber and Service Provider
during which a service may be disabled… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.71.7.6.1.13 |
| fsMefMepAvailabilitySchldDownEndTime Time when Scheduled down time is ending, denotes the ending of
time interval agreed upon by both the Subscriber and Service Provider
during which a service may be disabled by the … | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.71.7.6.1.14 |
| fsMefMepAvailabilityPriority Priority. 3 bit value to be used in the VLAN tag, if present
in the transmitted LMM frame. | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.71.7.6.1.15 |
| fsMefMepAvailabilityDropEnable Drop Enable bit value to be used in the VLAN tag, if present
in the transmitted LMM frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.71.7.6.1.16 |
| fsMefMepAvailabilityPercentage This object contains the percentage of Availability
If fsMefMepAvailabilityType is selected as defStatic,
this object contains the Availability Performance metric
… | column | OctetString | .1.3.6.1.4.1.10876.101.2.71.7.6.1.17 |
| fsMefMepAvailabilityRowStatus Indicates the status of MEP Availability Table row.
The writable columns in a row can not be changed if the row
is active. All columns must have a valid value befor… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.10876.101.2.71.7.6.1.18 |
| fsMefMepAvailabilityResultOK Indicates the result of the operation:
- true Initiating Availability measurement by sending
LM Message (LMM) is successful.
- false I… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.71.7.6.1.2 |
| fsMefMepAvailabilityInterval A time interval much smaller than Deadline,
Interval between two successive LMM transmissions to be used by the MEP
for calculating Availability. | column | SUPERMICRO-ECFM-Y1731-MI-MIBFsY1731AvailabilityInterval | .1.3.6.1.4.1.10876.101.2.71.7.6.1.3 |
| fsMefMepAvailabilityDeadline Specify a timeout, in seconds, the Time interval to conduct
the availability functionality | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.71.7.6.1.4 |
| fsMefMepAvailabilityLowerThreshold Availability frame loss ratio threshold, the lower threshold used
to define an interval as available. If far-end loss ratio is lesser than
configured lower threshold, that interv… | column | OctetString | .1.3.6.1.4.1.10876.101.2.71.7.6.1.5 |
| fsMefMepAvailabilityUpperThreshold Unavailability frame loss ratio threshold, the upper threshold to define
an interval as unavailable. If far-end loss ratio is greater than
configured upper threshold, that interv… | column | OctetString | .1.3.6.1.4.1.10876.101.2.71.7.6.1.6 |
| fsMefMepAvailabilityModestAreaIsAvailable Defines whether the area between upper and lower
threshold is referred as available or unavailable.
True - If Calculated Frame loss ratio falls
between up… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.2.71.7.6.1.7 |
| fsMefMepAvailabilityWindowSize Number of consecutive small time intervals for assessing availability | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.10876.101.2.71.7.6.1.8 |
| fsMefMepAvailabilityDestMacAddress The Target MAC Address Field to be transmitted: A unicast
destination MAC address to be used for Availability Measurement. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.10876.101.2.71.7.6.1.9 |