fsipv6NdCacheMaxRetries

SUPERMICRO-IPV6-MIB · .1.3.6.1.4.1.10876.101.1.28.1.1.1
MIB view Table view

Object

scalar r/w Integer32 
This object specifies the maximum number of retries
that can be attempted upon resolving the 'physical'
address of an IPv6 address during address resolution
or unreachability detection.

Context

MIB
SUPERMICRO-IPV6-MIB
OID
.1.3.6.1.4.1.10876.101.1.28.1.1.1
Type
scalar
Access
readwrite
Status
current
Parent
fsipv6Scalars
Siblings
15

Syntax

Integer32

Values & Constraints

Object Constraints
range: 1-10

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsipv6MaxLogicalIfaces
Maximum Number of configurable Logical IPv6 Interfaces
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.28.1.1.10
fsipv6MaxTunnelIfaces
Maximum Number of configurable Tunnel Interfaces
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.28.1.1.11
fsipv6MaxAddresses
Maximum Number of Configurable IPv6 Interfaces.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.28.1.1.12
fsipv6MaxFragReasmEntries
This object could be used for 2 purpose. 1. Maximum Number of IP6 datagrams awaiting reassembly. 2. Maximum Number of fragments that could be allowed in a single reassembly li…
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.28.1.1.13
fsipv6Nd6MaxCacheEntries
Maximum Number of ND Cache Entries.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.28.1.1.14
fsipv6PmtuMaxDest
Maximum Number of PMTU Table Entries
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.28.1.1.15
fsipv6RFC5095Compatibility
When the IPv6 node is configured to be RFC5095 compatible, then it should treat Type 0 Routing Header as invalid routing header type.
scalarEnumeration.1.3.6.1.4.1.10876.101.1.28.1.1.16
fsipv6PmtuConfigStatus
Flag to enable or disable Path MTU Discovery for the node.
scalarEnumeration.1.3.6.1.4.1.10876.101.1.28.1.1.2
fsipv6PmtuTimeOutInterval
The time in minutes after which the path MTU entry times out.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.28.1.1.3
fsipv6JumboEnable
Flag to enable or disable IPv6 Jumbogram facility for the node.
scalarEnumeration.1.3.6.1.4.1.10876.101.1.28.1.1.4
fsipv6NumOfSendJumbo
Number of IPv6 Jumbograms sent from the node.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.28.1.1.5
fsipv6NumOfRecvJumbo
Number of IPv6 Jumbograms received.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.28.1.1.6
fsipv6ErrJumbo
Number of IPv6 Error Jumbograms received or transmitted.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.1.28.1.1.7
fsipv6GlobalDebug
Enables the tracing in the selected submodule in IP6. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - BIT 0 - Initialisa…
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.28.1.1.8
fsipv6MaxRouteEntries
Maximum Number of Route Entries that could be configured in the system. Minumum value is 5.
scalarSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.28.1.1.9