fsipv6IfOperStatus
SUPERMICRO-IPV6-MIB ·
.1.3.6.1.4.1.10876.101.1.28.1.2.1.1.7
Object
column
Enumeration
The operational state of interface. It is up(1) if the fsipv6IfAdminStatus is 'up' and the layer below the network layer is also operational. Otherwise it is down(2).
Context
- MIB
- SUPERMICRO-IPV6-MIB
- OID
.1.3.6.1.4.1.10876.101.1.28.1.2.1.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fsipv6IfEntry
- Table
- fsipv6IfTable
- Siblings
- 22
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | up |
2 | down |
3 | stale |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsipv6IfIndex A unique value identifying the particular IPv6
interface. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.10876.101.1.28.1.2.1.1.1 |
| fsipv6IfHopLimit The Hop Limit value to be placed in the router advertisements
sent on this IPv6 interface. | column | Integer32 | .1.3.6.1.4.1.10876.101.1.28.1.2.1.1.10 |
| fsipv6IfDefRouterTime The default router time to be indicated in the router
advertisements sent on this IPv6 interface. This defines the
time in seconds for which this entity acts as the default
route… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.28.1.2.1.1.11 |
| fsipv6IfReachableTime The reachable time to be indicated in the router
advertisements sent on this IPv6 interface and also used by
this entity. This defines the time in seconds that a neighboring
node … | column | Integer32 | .1.3.6.1.4.1.10876.101.1.28.1.2.1.1.12 |
| fsipv6IfRetransmitTime The retransmit time to be indicated in the router
advertisements sent on this IPv6 interface and also used by
this entity. This defines the time in seconds between
retransmitted… | column | Integer32 | .1.3.6.1.4.1.10876.101.1.28.1.2.1.1.13 |
| fsipv6IfDelayProbeTime The time in seconds to delay before starting unreachability
probing of neighbor entries which are stale. | column | Integer32 | .1.3.6.1.4.1.10876.101.1.28.1.2.1.1.14 |
| fsipv6IfPrefixAdvStatus The prefix advertisement status on this IPv6 interface.
Object value enabled(1) allows the configured prefixes to
be advertised in router advertisements. Otherwise, the prefixes… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.28.1.2.1.1.15 |
| fsipv6IfMinRouterAdvTime The minimum time in seconds allowed between sending
unsolicited router advertisements.The default value is
one-third the default value of fsipv6IfMaxRouterAdvTime.
The value can … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.28.1.2.1.1.16 |
| fsipv6IfMaxRouterAdvTime The maximum time in seconds between sending unsolicited
router advertisements. Router advertisements are sent
periodically at a random interval between the values
specified by fs… | column | Integer32 | .1.3.6.1.4.1.10876.101.1.28.1.2.1.1.17 |
| fsipv6IfDADRetries The maximum number of neighbor solicitations sent for
the purpose of duplicate address detection on a tentative
address. | column | Integer32 | .1.3.6.1.4.1.10876.101.1.28.1.2.1.1.18 |
| fsipv6IfForwarding This MIB object is used to configure IPv6 routing and forwarding
on this interface. The default value is set to enabled. | column | Enumeration | .1.3.6.1.4.1.10876.101.1.28.1.2.1.1.19 |
| fsipv6IfType The type of interface immediately `below' the network layer
in the protocol stack. | column | Enumeration | .1.3.6.1.4.1.10876.101.1.28.1.2.1.1.2 |
| fsipv6IfRoutingStatus This MIB object indicates the current routing status
on this interface. This is based on the global IPv6
forwarding status of the mib object 'ipv6Forwarding'.
If 'ipv6Forwarding' … | column | Enumeration | .1.3.6.1.4.1.10876.101.1.28.1.2.1.1.20 |
| fsipv6IfIcmpErrInterval Time interval between tokens being added to the ICMPv6 token bucket. | column | milliseconds Integer32 | .1.3.6.1.4.1.10876.101.1.28.1.2.1.1.21 |
| fsipv6IfIcmpTokenBucketSize Maximum number of tokens stored in the ICMPv6 bucket | column | Integer32 | .1.3.6.1.4.1.10876.101.1.28.1.2.1.1.22 |
| fsipv6IfDestUnreachableMsg Indicates whether ICMPv6 destination unreachable messages are
enabled/disabled on this interface. | column | Enumeration | .1.3.6.1.4.1.10876.101.1.28.1.2.1.1.23 |
| fsipv6IfPortNum This object identifies the 'interface' over which this
network interface operates and is dependent on the value of
fsipv6IfType. This object reflects the ifindex value of
ifTable. | column | Integer32 | .1.3.6.1.4.1.10876.101.1.28.1.2.1.1.3 |
| fsipv6IfCircuitNum This object identifies the circuit over which this network
interface operates and is dependent on the value of
fsipv6IfType. If the data-link layer is Ethernet, PPP or
IPv4 Tunnel… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.28.1.2.1.1.4 |
| fsipv6IfToken The address token for this interface that is (at least)
unique on the link this interface is attached to. This token
can be specified only if the fsipv6IfType is frame-relay(32).… | column | OctetString | .1.3.6.1.4.1.10876.101.1.28.1.2.1.1.5 |
| fsipv6IfAdminStatus Indicates whether IPv6 is enabled/disabled on this interface.
When lower layer indicates the creation of the interface, an
entry will be create in IPv6 interfac table with
fsipv6I… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.28.1.2.1.1.6 |
| fsipv6IfRouterAdvStatus The router advertisement status on this interface. When
the object is set to enabled(1), router advertisements can be
allowed on the IPv6 interface. Otherwise, router advertisemen… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.28.1.2.1.1.8 |
| fsipv6IfRouterAdvFlags This object specifies the bits to be set in the router
advertisements sent by this entity on this interface.
M-bit set in the router advertisement indicates hosts
to configure an … | column | Enumeration | .1.3.6.1.4.1.10876.101.1.28.1.2.1.1.9 |