fsElpsPgConfigOperType
SUPERMICRO-ELPS-MIB ·
.1.3.6.1.4.1.10876.101.2.25.3.1.1.10
Object
column
r/w
Enumeration
This object is used to indicate the operation type/mode of the protection group entry. If the value is set to 'revertive(1)', then normal traffic will be shifted from the protection entity back to the working entity upon recovery of the working entity from the fault. If the value is set to 'nonRevertive(2)', then the normal traffic will not be shifted from the protection entity back to the working entity even after the recovery of the working entity from the fault.
Context
- MIB
- SUPERMICRO-ELPS-MIB
- OID
.1.3.6.1.4.1.10876.101.2.25.3.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsElpsPgConfigEntry
- Table
- fsElpsPgConfigTable
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | revertive |
2 | nonRevertive |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsElpsPgConfigPgId The unique identifier for the protection group. | column | PgId | .1.3.6.1.4.1.10876.101.2.25.3.1.1.1 |
| fsElpsPgConfigProtType This object is used to indicate the protection architecture type of the
protection group entry. Protection architecture types supported are
given below:
- 'oneIsToOneBidirection… | column | Enumeration | .1.3.6.1.4.1.10876.101.2.25.3.1.1.11 |
| fsElpsPgConfigName The name given to the protection group entry. This object is used to
refer the protection group in addition to the protection group Id. The
default value for this object will be… | column | OctetString | .1.3.6.1.4.1.10876.101.2.25.3.1.1.12 |
| fsElpsPgConfigRowStatus This object indicates the status of this row/entry.
Setting this object to Active is not allowed in the following
scenarios:
- If the value of the column fsElpsPgConfigMonitor… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.10876.101.2.25.3.1.1.13 |
| fsElpsPgConfigWorkingServicePointer This object is applicable for 'mplsLSP' and 'mplsPw' service types.
When fsElpsPgConfigServiceType is 'mplsLSP' :
- This object should be configured with the objec… | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.10876.101.2.25.3.1.1.14 |
| fsElpsPgConfigWorkingReverseServicePointer This object is applicable for 'mplsLSP' service type only.
When fsElpsPgConfigServiceType is 'mplsLSP' :
- Configuring this object is optional.
- This object shou… | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.10876.101.2.25.3.1.1.15 |
| fsElpsPgConfigProtectionServicePointer This object is applicable for 'mplsLSP' and 'mplsPw' service types.
When fsElpsPgConfigServiceType is 'mplsLSP' :
- This object should be configured with the objec… | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.10876.101.2.25.3.1.1.16 |
| fsElpsPgConfigProtectionReverseServicePointer This object is applicable for 'mplsLSP' service type only.
When fsElpsPgConfigServiceType is 'mplsLSP' :
- Configuring this object is optional.
- This object shou… | column | SNMPv2-TCRowPointer | .1.3.6.1.4.1.10876.101.2.25.3.1.1.17 |
| fsElpsPgConfigWorkingInstanceId This is the working instance which contains the VLAN to be protected
in this protection group.
If fsElpsContextVlanGroupManager is 'mstp' then vlan group Id shou… | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.25.3.1.1.18 |
| fsElpsPgConfigProtectionInstanceId This is the protection instance which contains the protection VLANs
in this protection group.
If fsElpsContextVlanGroupManager is 'mstp' then vlan group Id shoul… | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.25.3.1.1.19 |
| fsElpsPgConfigType This object indicates if the protection group needs to provide
protection for an individual service or a list of services.
If the value is 'individual(1)', the pr… | column | PgType | .1.3.6.1.4.1.10876.101.2.25.3.1.1.2 |
| fsElpsPgPscVersion This object indicates the PSC header version number to be used for
transmitting the Protection State Coordination (PSC) control
packet through the generic associated channel (G-AC… | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.25.3.1.1.20 |
| fsElpsPgConfigServiceType This object indicates the type of transport service for which this
protection group will provide protection.
The following service types are supported
- vlan(1)
… | column | PgServiceType | .1.3.6.1.4.1.10876.101.2.25.3.1.1.3 |
| fsElpsPgConfigMonitorMechanism This object indicates the type of monitoring mechanism used for
detecting faults for this protection group entry.
If the value of this object is not 'none' for any fsElpsPgConfi… | column | PgMonitorMechanismType | .1.3.6.1.4.1.10876.101.2.25.3.1.1.4 |
| fsElpsPgConfigIngressPort This object indicates the port through which the traffic ingresses for
the working and protection transport services into the protection
domain. This port defines the boundary … | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.10876.101.2.25.3.1.1.5 |
| fsElpsPgConfigWorkingPort This object indicates the working port which carries the normal traffic
in the absence of any failure.
For 'vlan' service type, this object is mandatory and should be configured … | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.10876.101.2.25.3.1.1.6 |
| fsElpsPgConfigProtectionPort This object indicates the protection port which carries the normal
traffic upon failure of the working transport entity.
For 'vlan' service type, this object is mandatory and sho… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.10876.101.2.25.3.1.1.7 |
| fsElpsPgConfigWorkingServiceValue This object indicates the service identifier of the working service
which carries the normal traffic in the absence of any failure.
This object is applicable only… | column | PgServiceValueOrNone | .1.3.6.1.4.1.10876.101.2.25.3.1.1.8 |
| fsElpsPgConfigProtectionServiceValue This object indicates the service identifier of the protection service
which carries the normal traffic upon failure of the working entity.
This object is applic… | column | PgServiceValueOrNone | .1.3.6.1.4.1.10876.101.2.25.3.1.1.9 |