fsElpsPgCmdExtCmd
SUPERMICRO-ELPS-MIB ·
.1.3.6.1.4.1.10876.101.2.25.3.2.1.3
Object
column
r/w
PgExtCmd
This column is used by the operator to request that the protection group
state machine perform some administrative operation. The operator
requests a command by writing the command value to this column. The
command may or may not affect the operation of the state machine based
on the current state and the ELPS protocol indicates the result of this
command on the state machine by setting the value of the
fsElpsPgCmdExtCmdStatus column of this table. If the command is not
accepted, then the fsElpsPgCmdActiveRequest indicates the last accepted
and currently operating request for this protection group. The
configuration of this object is allowed and meaningful only when the
the protection group entry for this fsElpsPgConfigPgId is active.
The default value for this object will be 'clear' command indicating
that no command has been issued.
The 'freeze' command is volatile and will not be restored after a
configuration save-and-restore operation.
Context
- MIB
- SUPERMICRO-ELPS-MIB
- OID
.1.3.6.1.4.1.10876.101.2.25.3.2.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- fsElpsPgCmdEntry
- Table
- fsElpsPgCmdTable
- Siblings
- 11
Syntax
PgExtCmd
- Source
- PgExtCmd
- Base type
Enumeration
Values & Constraints
Type Values
1 | lockOutProtection |
2 | forceSwitchToProtection |
3 | manualSwitchToProtection |
4 | exercise |
5 | clear |
6 | freeze |
7 | clearFreeze |
8 | manualSwitchToWorking |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fsElpsPgCmdHoTime This column is used to configure the hold-off timer. The purpose is
to allow a server layer protection mechanism to have a chance to fix
the problem before switching at the cl… | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.25.3.2.1.1 |
| fsElpsPgCmdSemState This column shows the current state of the State Event Machine
for this protection group. | column | PgSemState | .1.3.6.1.4.1.10876.101.2.25.3.2.1.10 |
| fsElpsPgCmdPgStatus The object is to indicate the status of the protection group. | column | PgStatus | .1.3.6.1.4.1.10876.101.2.25.3.2.1.11 |
| fsElpsPgCmdApsPeriodicTime This column is used to configure the time interval for the periodic
transmission of
- Protection Switching PDUs, namely, APS PDU for 'vlan' service
- Protection State Coordina… | column | seconds Unsigned32 | .1.3.6.1.4.1.10876.101.2.25.3.2.1.12 |
| fsElpsPgCmdWTR This column is used to configure the wait-to-restore timer for the
protection group. The timer has a period from 1 to 1000 minutes,
configurable in steps of 1 minute.
… | column | Unsigned32 | .1.3.6.1.4.1.10876.101.2.25.3.2.1.2 |
| fsElpsPgCmdExtCmdStatus This column indicates the status of the most recent administrative
command issued to this protection group through the fsElpsPgCmdExtCmd
object. | column | Enumeration | .1.3.6.1.4.1.10876.101.2.25.3.2.1.4 |
| fsElpsPgCmdLocalCondition This column indicates the most recent local condition that had occurred
for this protection group. | column | PgLocalCondition | .1.3.6.1.4.1.10876.101.2.25.3.2.1.5 |
| fsElpsPgCmdLocalConditionStatus This column indicates the status of the most recent local condition
as indicated by the fsElpsPgCmdLocalCondition that occured for this
protection group. | column | Enumeration | .1.3.6.1.4.1.10876.101.2.25.3.2.1.6 |
| fsElpsPgCmdFarEndRequest This column indicates the most recent far-end request received for this
protection group through the reception of APS PDU. | column | PgFarEndRequest | .1.3.6.1.4.1.10876.101.2.25.3.2.1.7 |
| fsElpsPgCmdFarEndRequestStatus This column indicates the status of the most recent far-end request
as indicated by the fsElpsPgCmdFarEndRequest object received for this
protection group. | column | Enumeration | .1.3.6.1.4.1.10876.101.2.25.3.2.1.8 |
| fsElpsPgCmdActiveRequest This column indicates the last local request (command or condition) or
far end request (received for this protection group through the
reception of APS PDU) that was accepted an… | column | PgActiveRequest | .1.3.6.1.4.1.10876.101.2.25.3.2.1.9 |