fsMIEcfmMepIfIndex

SUPERMICRO-ECFM-MI-MIB · .1.3.6.1.4.1.10876.101.1.160.1.0.7.1.2
MIB view Table view

Object

column r/w IF-MIBInterfaceIndexOrZero 
This object is the interface index of the interface either a
bridge port, or an aggregated IEEE 802.1 link within a bridge
port, to which the MEP is attached.
              
Upon a restart of the system, the system SHALL, if necessary,
change the value of this variable so that it indexes the
entry in the interface table with the same value of ifAlias
that it indexed before the system restart.  If no such
entry exists, then the system SHALL set this variable to 0.
              
For MPLS-TP based MEPs this object is not configurable and the ifIndex 
shall remain as zero.

Context

MIB
SUPERMICRO-ECFM-MI-MIB
OID
.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.2
Type
column
Access
readwrite
Status
current
Parent
fsMIEcfmMepEntry
Table
fsMIEcfmMepTable
Siblings
45

Syntax

IF-MIBInterfaceIndexOrZero
Source
IF-MIBInterfaceIndexOrZero
Base type
Integer32

Values & Constraints

Type Constraints
range: 0..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsMIEcfmMepIdentifier
Integer that is unique among all the MEPs in the same MA. Other definition is: a small integer, unique over a given Maintenance Association, identifying a specific Maintenance ass…
columnFsMIEcfmMepId.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.1
fsMIEcfmMepLowPrDef
An integer value specifying the lowest priority defect that is allowed to generate fault alarm.
columnFsMIEcfmLowestAlarmPri.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.10
fsMIEcfmMepFngAlarmTime
The time that defects must be present before a Fault Alarm is issued (fngAlarmTime. 20.33.3) (default 2.5s).
columnInteger32.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.11
fsMIEcfmMepFngResetTime
The time that defects must be absent before re-enabling a Fault Alarm (fngResetTime, 20.33.4) (default 10s).
columnInteger32.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.12
fsMIEcfmMepHighestPrDefect
The highest priority defect that has been present since the MEPs Fault Notification Generator State Machine was last in the FNG_RESET state.
columnFsMIEcfmHighestDefectPri.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.13
fsMIEcfmMepDefects
A vector of Boolean error conditions from Table 20-1, any of which may be true: DefRDICCM(1) DefMACstatus(2) DefRemoteCCM(3) DefErrorCCM(4) DefXconCCM(5)
columnFsMIEcfmMepDefects.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.14
fsMIEcfmMepErrorCcmLastFailure
The last-received CCM that triggered an DefErrorCCM fault.
columnOctetString.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.15
fsMIEcfmMepXconCcmLastFailure
The last-received CCM that triggered a DefXconCCM fault.
columnOctetString.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.16
fsMIEcfmMepCcmSequenceErrors
The total number of out-of-sequence CCMs received from all remote MEPs.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.17
fsMIEcfmMepCciSentCcms
Total number of Continuity Check messages transmitted.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.18
fsMIEcfmMepNextLbmTransId
Next sequence number/transaction identifier to be sent in a Loopback message. This sequence number can be zero because it wraps around.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.19
fsMIEcfmMepLbrIn
Total number of valid, in-order Loopback Replies received.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.20
fsMIEcfmMepLbrInOutOfOrder
The total number of valid, out-of-order Loopback Replies received.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.21
fsMIEcfmMepLbrBadMsdu
(optional) The total number of LBRs received whose mac_service_data_unit did not match (except for the OpCode) that of the corresponding LBM (20.2.3).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.22
fsMIEcfmMepLtmNextSeqNumber
Next transaction identifier/sequence number to be sent in a Linktrace message. This sequence number can be zero because it wraps around.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.23
fsMIEcfmMepUnexpLtrIn
The total number of unexpected LTRs received (20.39.1).
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.24
fsMIEcfmMepLbrOut
Total number of Loopback Replies transmitted.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.25
fsMIEcfmMepTransmitLbmStatus
A Enumerated value set to 'transmit'to initiate LBM transmission. Set to 'ready' or 'notReady' by the MEP Loopback Initiator State Machine.
columnFsMIEcfmTransmitStatus.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.26
fsMIEcfmMepTransmitLbmDestMacAddress
The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column fsMIEcfmMepTransmitLbmDestIsMepId is 'false…
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.27
fsMIEcfmMepTransmitLbmDestMepId
The Maintenance association End Point Identifier of another MEP in the same Maintenance Association to which the LBM is to be sent. This address will be used if the value of the c…
columnFsMIEcfmMepIdOrZero.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.28
fsMIEcfmMepTransmitLbmDestIsMepId
True indicates that MEPID of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmis…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.29
fsMIEcfmMepDirection
The direction in which the MEP faces on the Bridge port.
columnFsMIEcfmMpDirection.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.3
fsMIEcfmMepTransmitLbmMessages
The number of Loopback messages to be transmitted.
columnInteger32.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.30
fsMIEcfmMepTransmitLbmDataTlv
An arbitrary amount of data to be included in the Data TLV, if the Data TLV is selected to be sent.
columnOctetString.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.31
fsMIEcfmMepTransmitLbmVlanPriority
Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame. The default value is CCM priority.
columnInteger32.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.32
fsMIEcfmMepTransmitLbmVlanDropEnable
Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame. For more information about VLAN Drop Enable, please check IEEE 802.1ad.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.33
fsMIEcfmMepTransmitLbmResultOK
Indicates the result of the operation: - true The Loopback Message(s) will be (or has been) sent. - false The Loopback Message(s) will not …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.34
fsMIEcfmMepTransmitLbmSeqNumber
The Loopback Transaction Identifier (fsMIEcfmMepNextLbmTransId) of the first LBM (to be) sent. The value returned is undefined if fsMIEcfmMepTransmitLbmResultOK is false.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.35
fsMIEcfmMepTransmitLtmStatus
A Enumerated value set to 'transmit' to initiate LTM transmission. Set to 'ready' or 'notReady' by the MEP Linktrace Initiator State Machine.
columnFsMIEcfmTransmitStatus.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.36
fsMIEcfmMepTransmitLtmFlags
The flags field for LTMs transmitted by the MEP.
columnBits.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.37
fsMIEcfmMepTransmitLtmTargetMacAddress
The Target MAC Address Field to be transmitted: A unicast destination MAC address. This address will be used if the value of the column fsMIEcfmMepTransmitLtmTargetIsMepId is 'fal…
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.38
fsMIEcfmMepTransmitLtmTargetMepId
An indication of the Target MAC Address Field to be transmitted: The Maintenance association End Point Identifier of another MEP in the same Maintenance Association This address w…
columnFsMIEcfmMepIdOrZero.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.39
fsMIEcfmMepPrimaryVid
An integer indicating the Primary VID of the MEP, always one of the VIDs assigned to the MEP's MA. The value 0 indicates that either the Primary VID is that of the MEP's MA, or t…
columnUnsigned32.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.4
fsMIEcfmMepTransmitLtmTargetIsMepId
True indicates that MEPID of the target MEP is used for Linktrace transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmi…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.40
fsMIEcfmMepTransmitLtmTtl
The LTM TTL field. Default value, if not specified, is 64. The TTL field indicates the number of hops remaining to the LTM. Decremented by 1 by each Linktrace Responder that hand…
columnUnsigned32.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.41
fsMIEcfmMepTransmitLtmResult
Indicates the result of the operation: - true The Linktrace Message will be (or has been) sent. - false The Linktrace Message will not be sent
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.42
fsMIEcfmMepTransmitLtmSeqNumber
The LTM Transaction Identifier (fsMIEcfmMepLtmNextSeqNumber) of the LTM sent. The value returned is undefined if fsMIEcfmMepTransmitLtmResult is false.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.43
fsMIEcfmMepTransmitLtmEgressIdentifier
Identifies the MEP Linktrace Initiator that is originating, or the Linktrace Responder that is forwarding, this LTM. The low-order six octets contain a 48-bit IEEE MAC address uni…
columnOctetString.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.44
fsMIEcfmMepRowStatus
The status of the row. The writable columns in a row can not be changed if the row is active. All columns must have a valid value before a row can be activated.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.45
fsMIEcfmMepCcmOffload
The administrative MEP CCMOffloading status. when value 'enabled' (1) is set The CCM Offloading starts for the MEP in the system.when value 'disabled' (2) is set then CCMOffload…
columnEnumeration.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.46
fsMIEcfmMepActive
Administrative state of the MEP A Boolean indicating the administrative state of the MEP. True indicates that the MEP is to function normally, and fa…
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.5
fsMIEcfmMepFngState
Current state of the MEP Fault Notification Generator State Machine.
columnFsMIEcfmFngState.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.6
fsMIEcfmMepCciEnabled
If set to true, the MEP will generate CCM messages.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.7
fsMIEcfmMepCcmLtmPriority
The priority value for CCMs and LTMs transmitted by the MEP. Default Value in the highest priority value allowed to pass through the bridge port for any of this MEPs VIDs. The man…
columnUnsigned32.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.8
fsMIEcfmMepMacAddress
MAC address of the MEP. For MEPs that do not possess a MAC address this value will be all zeros. Such a MEP will be present in the MPLS TP transport networks.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.10876.101.1.160.1.0.7.1.9