ifWanPeakSpeed
SUPERMICRO-CFA-MIB ·
.1.3.6.1.4.1.10876.101.1.27.1.6.1.7
Object
The maximum speed available on the interface.
This is semantically similar to the CIR+EIR for FR
and PCR for ATM. This value is used by IP-QoS.
For PPP links this object should be given the value
of the speed of the lower link. For MP this value
is the sum of the speed of all the lower PPP links.
If the value is not specified then the ifWanSustatinedSpeed
values are taken as the peak speed values.
Context
- MIB
- SUPERMICRO-CFA-MIB
- OID
.1.3.6.1.4.1.10876.101.1.27.1.6.1.7- Type
- column
- Access
- readwrite
- Status
- deprecated
- Parent
- ifWanEntry
- Table
- ifWanTable
- Siblings
- 12
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifWanInterfaceType deprecated The type of the WAN interface. This is
same as if MIB-2 ifType and ifMainType. | column | Enumeration | .1.3.6.1.4.1.10876.101.1.27.1.6.1.1 |
| ifWanIdleTimeout deprecated The minimum duration (in seconds) to wait before
disconnecting an idle established circuit/interface. (a
default value of 0 where not required) Specification
of the object is opti… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.27.1.6.1.10 |
| ifWanPeerIpAddr deprecated The IP address of the peer to whom this interface is
established with. Specification of this value is optional
for all interfaces.
For PPP and MLPPP interfaces, thi… | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.10876.101.1.27.1.6.1.11 |
| ifWanRtpHdrComprEnable deprecated Enable or disable the RTP header compression on the
WAN interface. This object is writable for only those
interface which are registered with IP. If the RTP
header compression neg… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.10876.101.1.27.1.6.1.12 |
| ifWanPersistence deprecated The persistence of the WAN interface in the system.
Demand(2) circuits are pre-configured but are opened only
when there is some data to be sent (these interfaces … | column | Enumeration | .1.3.6.1.4.1.10876.101.1.27.1.6.1.13 |
| ifWanConnectionType deprecated The type of WAN connection. This object
will not be applicable to PPP and MLPPP
interfaces and will have the value other(0).
For all other interfaces the default value
is permanen… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.27.1.6.1.2 |
| ifWanVirtualPathId deprecated The VPI for ATM VCs. This object
will not be applicable to other
interfaces and will have the value 0. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.27.1.6.1.3 |
| ifWanVirtualCircuitId deprecated The VCI for ATM VCs, DLCI for Frame Relay VCs and
the channel identifier for X.25 VCs.
For SVCs this object is read-only, the value will be
assigned after the SVC … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.27.1.6.1.4 |
| ifWanPeerMediaAddress deprecated The Media Address of the peer to whom this
connection is to be established.
For ATM VCs this can be in E.164, NSAP or either of these along
with the subaddress. Fo… | column | OctetString | .1.3.6.1.4.1.10876.101.1.27.1.6.1.5 |
| ifWanSustainedSpeed deprecated The sustained or minimum gauranteed speed of
the interface. This is semantically similar to
the CIR for FR and SCR for ATM. The value to be
assigned is the CIR or SCR as the case … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.27.1.6.1.6 |
| ifWanMaxBurstSize deprecated The maximum burst size in bytes that the interface
can sustain. This is semantically similar to the Bc for FR
and MBS for ATM. This value is used by IP-QoS.
For PPP… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.27.1.6.1.8 |
| ifWanIpQosProfileIndex deprecated The index of an IP-QoS profile which is configured
in the IP-QoS MIB. Assigning the index of the profile
results in instantiation of that profile for the
interface.
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.27.1.6.1.9 |