ifMainAdminStatus
SUPERMICRO-CFA-MIB ·
.1.3.6.1.4.1.10876.101.1.27.1.4.1.4
Object
column
r/w
Enumeration
The desired state of the interface. This object
can be set only when the ifMainRowStatus of the
interface is active. This object has the semantics
of the ifAdminStatus of the standard ifTable.
The testing(3) state indicates that no operational
packets can be passed - this state is not currently
supported.
When a managed system initializes, all
interfaces start with ifMainAdminStatus in the
down(2) state, it's a default state also. As a result
of either explicit management action or per
configuration information retained by the managed
system, ifMainAdminStatus is then changed to
the up (1) state (or remains in the
down(2) state).
Context
- MIB
- SUPERMICRO-CFA-MIB
- OID
.1.3.6.1.4.1.10876.101.1.27.1.4.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ifMainEntry
- Table
- ifMainTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | up |
2 | down |
3 | testing |
4 | loopback |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifMainIndex A unique value, greater than zero, for each
interface. This object is identical to the ifIndex
of the standard MIB-2 ifTable. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.10876.101.1.27.1.4.1.1 |
| ifMainNetworkType This object indicates whether this interface is a
WAN or LAN link.
The default value for this object varies according
to the interface type. All interfaces of type… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.27.1.4.1.10 |
| ifMainWanType This object indicates whether this interface is a
private or public WAN link.
This object is applicable only for PPP interfaces and
ethernet WAN interfaces. For o… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.27.1.4.1.11 |
| ifMainDesc A textual string which contains the description about an interface. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.10876.101.1.27.1.4.1.12 |
| ifMainStorageType The storage type for this conceptual row in the ifMainTable.
Conceptual rows having the value 'permanent' need not allow
write-access to any columnar object in the row.
only vola… | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.10876.101.1.27.1.4.1.13 |
| ifMainExtSubType This object stores the subType value of the specified interface.
These sub types are specified for the ifMainType-propVirtual. | column | Enumeration | .1.3.6.1.4.1.10876.101.1.27.1.4.1.14 |
| ifMainRportL3Mtu This value indicates the L3 MTU for router port,
and is not applicable for other interface type.
The lenght of ethernet header is also included.
For router port, i… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.27.1.4.1.15 |
| ifMainType The type/protocol of interface. Specification of
the object is mandatory for all interfaces. This
value should be specified after the row creation
in the ifMainTable and before se… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.27.1.4.1.2 |
| ifMainMtu The MTU for the interface as shown to the higher
interface sub-layer (this value should not include
the encapsulation or header added by the interface).
If IP is operating over th… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.10876.101.1.27.1.4.1.3 |
| ifMainOperStatus The current operational state of the interface.
The testing (3) state indicates that no operational
packets can be passed - this state is not supported
currently.
… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.27.1.4.1.5 |
| ifMainEncapType The encapsulation type to be used over the interface.
For Ethernet interfaces, the default encapsulation
type is ethernetV2(8). The other possible encapsulation
is … | column | Enumeration | .1.3.6.1.4.1.10876.101.1.27.1.4.1.6 |
| ifMainBrgPortType The Bridge port type of this specified switch port.
Bridge Port type can be specified only for switch ports and not for
router ports, IVR interfaces and I-LAN Interfaces.
… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.27.1.4.1.7 |
| ifMainRowStatus A RowStatus variable for addition, deletion and in-activation
of the interfaces. Specification of the object is mandatory
for all interfaces.
When the status is act… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.10876.101.1.27.1.4.1.8 |
| ifMainSubType This object stores the subType value of the specified interface.
Configuration of this object is not mandatory.By default
Sub type value will be updated based on the hardware link… | column | Enumeration | .1.3.6.1.4.1.10876.101.1.27.1.4.1.9 |