fsDtlsDebugMask

SUPERMICRO-CAPWAP-MIB · .1.3.6.1.4.1.10876.101.2.82.1.9
MIB view Table view

Object

scalar r/w SNMPv2-SMIInteger32 
This object is used to enable Trace Statements in
DTLS Module.
          
A FOUR BYTE integer is used for enabling the level of tracing.
Each BIT in the four byte integer, represents a particular
level of Trace.
          
The maping between the bit positions & the level of trace is
as follows
0 - Fn Entry Traces
1 - Fn Exit  Traces
2 - Packet Traces
3 - Response Traces
4 - All
The remaining bits are unused. Combination of levels are
also allowed.
          
The user has to enter the corresponding Integer32 VALUE for the
bits set. For example if bits 0 and 1 are set then user has to
give the value 3.

Context

MIB
SUPERMICRO-CAPWAP-MIB
OID
.1.3.6.1.4.1.10876.101.2.82.1.9
Type
scalar
Access
readwrite
Status
current
Parent
fsCapwapSystem
Siblings
11

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsCapwapModuleStatus
This objects used to perform CAPWAP enable/disable
scalarEnabledStatus.1.3.6.1.4.1.10876.101.2.82.1.1
fsDtlsEncryption
Set the encryption tyep for DTLS.
scalarEnumeration.1.3.6.1.4.1.10876.101.2.82.1.10
fsDtlsEncryptAlgorithm
Set the encryption Algoritham.
scalarEnumeration.1.3.6.1.4.1.10876.101.2.82.1.11
fsStationType
This objects used to identify whether the station type is blacklist or whitelist
scalarEnumeration.1.3.6.1.4.1.10876.101.2.82.1.12
fsCapwapSystemControl
This objects used to Shut down CAPWAP module
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.2.82.1.2
fsCapwapControlUdpPort
Configure capwap Control channel UDP port number
scalarUnsigned32.1.3.6.1.4.1.10876.101.2.82.1.3
fsCapwapControlChannelDTLSPolicyOptions
The AC communicates its policy on the use of DTLS for the CAPWAP Control channel
scalarBits.1.3.6.1.4.1.10876.101.2.82.1.4
fsCapwapDataChannelDTLSPolicyOptions
The AC communicates its policy on the use of DTLS for the CAPWAP data channel
scalarBits.1.3.6.1.4.1.10876.101.2.82.1.5
fsWlcDiscoveryMode
Configure discovery Mode. The supported values are MAC Disc Mode (1) (Default) Auto Disc mode (2)
scalarBits.1.3.6.1.4.1.10876.101.2.82.1.6
fsCapwapWtpModeIgnore
When set to enabled the compatibility between the AP's and WLC's MAC and Tunnel modes need not be checked during discovery and any mode should be supported by the WLC.
scalarEnabledStatus.1.3.6.1.4.1.10876.101.2.82.1.7
fsCapwapDebugMask
This object is used to enable Trace Statements in CAPWAP Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer, repre…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.10876.101.2.82.1.8