fsMIBfdSessRole

SUPERMICRO-BFD-MI-MIB · .1.3.6.1.4.1.10876.101.2.55.2.1.1.1
MIB view Table view

Object

column r/w Enumeration 
This object specifies whether the system is playing the
active(1) role or the passive(2) role for this BFD session.
BFD session will not come up if both the ends of a path are
configured to be passive. In case of MPLS and MPLS-TP LSP,
it is expected to configure the BFD session in the
ingress of the LSP as Active. Even in the case of static
provisioning of discriminators, it is recommended to
configure the BFD session as Active at the ingress and
as Passive at the egress. In the case of PW, BFD session
at both the ends should be Active

Context

MIB
SUPERMICRO-BFD-MI-MIB
OID
.1.3.6.1.4.1.10876.101.2.55.2.1.1.1
Type
column
Access
readwrite
Status
current
Parent
fsMIBfdSessionEntry
Table
fsMIBfdSessionTable
Siblings
13

Syntax

Enumeration

Values & Constraints

Enumerated Values
1active
2passive

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
fsMIBfdSessMapType
This object indicates the type of path being monitored by this BFD session entry.
columnFsSessionMapTypeTC.1.3.6.1.4.1.10876.101.2.55.2.1.1.10
fsMIBfdSessMapPointer
If fsMIBfdSessMapType is ldpipv4(1) or ldpipv6(2), then this object MUST contain zeroDotZero or point to an instance of the mplsXCEntry indicating the LDP-based LSP associated wi…
columnSNMPv2-TCRowPointer.1.3.6.1.4.1.10876.101.2.55.2.1.1.11
fsMIBfdSessCardNumber
This object specifies the card number to which the BFD session is offloaded.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.2.55.2.1.1.12
fsMIBfdSessSlotNumber
This object specifies the slot number to which the BFD session is offloaded.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.2.55.2.1.1.13
fsMIBfdSessRegisteredClients
This object specifies the BFD clients who are all registered for the particular session. When each client register for the session, the bit corresponding to the Client ID will b…
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.10876.101.2.55.2.1.1.14
fsMIBfdSessMode
This object specifies whether the BFD session is running in Continuity Check(CC) or the Connectivity Verification(CV) mode. This object is always cc(1) if the value of fsMIBfdSes…
columnEnumeration.1.3.6.1.4.1.10876.101.2.55.2.1.1.2
fsMIBfdSessRemoteDiscr
This object specifies the session discriminator that is to be used by the remote system for this BFD session. This object is configurable for MPLS and MPLS-TP paths. …
columnUnsigned32.1.3.6.1.4.1.10876.101.2.55.2.1.1.3
fsMIBfdSessEXPValue
This object specifies the MPLS experimental field (traffic class field) value that should be sent in the MPLS header for the BFD control packets.
columnUnsigned32.1.3.6.1.4.1.10876.101.2.55.2.1.1.4
fsMIBfdSessTmrNegotiate
This object specifies if timer negotiation is required for the BFD session. When set to false, timer negotiation is disabled and if the value of the received DesiredMinTxInterval …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.2.55.2.1.1.5
fsMIBfdSessOffld
This object specifies if the BFD session needs to be offloaded onto a specific hardware chipset or an external software component or a seperate CPU/Core. When set to true the BFD …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.2.55.2.1.1.6
fsMIBfdSessEncapType
This object specifies the encapsulation type of the BFD Control packets. In case of MPLS LSP/Tunnel, the encapsulation type should be set to mplsIp, which is the default value for…
columnEnumeration.1.3.6.1.4.1.10876.101.2.55.2.1.1.7
fsMIBfdSessAdminCtrlReq
This object specifies if an administrator control or intervention is required for the session due to an error specified by fsMIBfdSessAdminCtrlErrReason. This object will display …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.10876.101.2.55.2.1.1.8
fsMIBfdSessAdminCtrlErrReason
This object specifies the reason for an error in the BFD session. For instance, when offloading of a BFD session fails due to any reason, this object is set to the value sessOfflo…
columnEnumeration.1.3.6.1.4.1.10876.101.2.55.2.1.1.9