sub10UnitMgmtAlarmName

SUB10SYSTEMS-MIB · .1.3.6.1.4.1.39003.3.2.6.1.1.3

Object

column r/w Sub10AlarmName

The alarm name. This is a short descriptive name for the alarm.
Alarm names can be duplicated across entries in order to define
the same alarm to be raised and cleared according to different
thresholds and different severity levels. If the user defines mutiple alarms
with the same name it important to correctly configure severity and
thresholds to avoid multiple alarms being generated for the same condition.
Fixed alarm names cannot be modified. Fixed alarms are populated
automatically in rows 1 to ('sub10UnitMgmtAlarmsUserDefStart'-1)

Context

MIB: SUB10SYSTEMS-MIB
OID: .1.3.6.1.4.1.39003.3.2.6.1.1.3
Type: column
Access: readwrite
Status: current
Parent: sub10UnitMgmtAlarmEntry
Table: sub10UnitMgmtAlarmTable
Siblings: 17

Syntax

Sub10AlarmName

Source: Sub10AlarmName
Base type: OctetString

Values & Constraints

Type Constraints

range: 1..32

Related Objects

Sibling Objects

Object	Type	Syntax	OID
sub10UnitMgmtAlarmIndex The sub10UnitMgmtAlarmTable index.	column	Sub10AlarmIndex	`.1.3.6.1.4.1.39003.3.2.6.1.1.1`
sub10UnitMgmtAlarmClearThresh The threshold value which the measured object's value crosses causes the alarm to be cleared. The behaviour of a measured value and alarm threshold comparison is defined by the ob…	column	OctetString	`.1.3.6.1.4.1.39003.3.2.6.1.1.10`
sub10UnitMgmtAlarmRaiseIntvls The number of continuous monitoring intervals (see sub10UnitMgmtAlarmMonitorIntvl) where the measured object has crossed the raise threshold before the alarm state is set to raise…	column	Unsigned32	`.1.3.6.1.4.1.39003.3.2.6.1.1.11`
sub10UnitMgmtAlarmClearIntvls The number of continuous monitoring intervals (see sub10UnitMgmtAlarmMonitorIntvl) where the measured object has crossed the clear threshold before the alarm state is set to clear…	column	Unsigned32	`.1.3.6.1.4.1.39003.3.2.6.1.1.12`
sub10UnitMgmtAlarmType The type of the alarm and defines the type of notification (trap) used to inform management entities.	column	Sub10AlarmType	`.1.3.6.1.4.1.39003.3.2.6.1.1.13`
sub10UnitMgmtAlarmSmtpAddress The smtp mail address. If set the alarm is suitable formatted and sent to the given mail address.	column	OctetString	`.1.3.6.1.4.1.39003.3.2.6.1.1.14`
sub10UnitMgmtAlarmToSyslog If set to 'enabled' the alarm is suitably formatted and sent to syslog.	column	Sub10State	`.1.3.6.1.4.1.39003.3.2.6.1.1.15`
sub10UnitMgmtAlarmEnabled If set to 'enabled' the alarm is enabled.	column	Sub10State	`.1.3.6.1.4.1.39003.3.2.6.1.1.16`
sub10UnitMgmtAlarmMeasObjectVal The value of sub10UnitMgmtAlarmMeasObject formatted as a displayString which when measured by the alarm subsystem caused an alarm to be either raised or cleared. This is therefore…	column	OctetString	`.1.3.6.1.4.1.39003.3.2.6.1.1.17`
sub10UnitMgmtAlarmToSNMP If set to 'enabled' the alarm is forwarded as an SNMP notification / trap.	column	Sub10State	`.1.3.6.1.4.1.39003.3.2.6.1.1.18`
sub10UnitMgmtAlarmRowStatus The row status of this row. All table rows are fixed in size and as such do not require conceptual row creation. Instead the RowStatus is set to active(1) or notInService(2) which…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.39003.3.2.6.1.1.2`
sub10UnitMgmtAlarmSeverity The alarm severity. This is added to each alarm as a parameter.	column	Sub10AlarmSeverity	`.1.3.6.1.4.1.39003.3.2.6.1.1.4`
sub10UnitMgmtAlarmMeasObject The measured object. This is the object name of the object in the MIB with which the alarm is associated and which the configured thresholds are compared with when deriving the st…	column	Sub10MeasuredObject	`.1.3.6.1.4.1.39003.3.2.6.1.1.5`
sub10UnitMgmtAlarmMonitorIntvl The interval in seconds when the measured object is to be read and compared with the raise and clear thresholds. An alarm cannot be raised or cleared quicker than the configured i…	column	Unsigned32	`.1.3.6.1.4.1.39003.3.2.6.1.1.6`
sub10UnitMgmtAlarmRaiseOper Type of operation which determines when an alarm is to be raised. Definition of each type is as follows: lt - Measured objects value is less than rai…	column	Sub10AlarmOperation	`.1.3.6.1.4.1.39003.3.2.6.1.1.7`
sub10UnitMgmtAlarmRaiseThresh The threshold value which the measured object's value crosses causes the alarm to be raised. The behaviour of a measured value and alarm threshold comparison is defined by the obj…	column	OctetString	`.1.3.6.1.4.1.39003.3.2.6.1.1.8`
sub10UnitMgmtAlarmClearOper Type of operation which determines when an alarm is to be cleared. Definition of each type is as follows: lt - Measured objects value is less than cl…	column	Sub10AlarmOperation	`.1.3.6.1.4.1.39003.3.2.6.1.1.9`

Indexes