sub10RadioMgmtTxRxFreq
SUB10SYSTEMS-MIB ·
.1.3.6.1.4.1.39003.5.2.2
Object
scalar
r/w
Enumeration
The configured TX/RX frequency pairs of radio link. Each enumerated option
represents the TX and RX frequency pair settings in MHz.
Options are available for E-Band at channel width 250MHz and 500MHz
and E-Band channel width 500MHz.
IMPORTANT: This object is controlled by transaction management.
Any changes to this object must be transactionally acknowledged
following a successful set thus protecting against loss of
communication with the unit. To acknowledge the transaction
set the object sub10UnitMgmtTransaction to transactionCommit(2).
Context
- MIB
- SUB10SYSTEMS-MIB
- OID
.1.3.6.1.4.1.39003.5.2.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- sub10RadioMgmt
- Siblings
- 7
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | e250Tx71250Rx81250 |
1 | e250Tx71500Rx81500 |
2 | e250Tx71750Rx81750 |
3 | e250Tx72000Rx82000 |
4 | e250Tx72250Rx82250 |
5 | e250Tx72500Rx82500 |
6 | e250Tx72750Rx82750 |
7 | e250Tx73000Rx83000 |
8 | e250Tx73250Rx83250 |
9 | e250Tx73500Rx83500 |
10 | e250Tx73750Rx83750 |
11 | e250Tx74000Rx84000 |
12 | e250Tx74250Rx84250 |
13 | e250Tx74500Rx84500 |
14 | e250Tx74750Rx84750 |
15 | e250Tx75000Rx85000 |
16 | e250Tx75250Rx85250 |
17 | e250Tx75500Rx85500 |
18 | e250Tx75750Rx85750 |
19 | e500Tx72375Rx82375 |
20 | e500Tx72625Rx82625 |
21 | e500Tx72875Rx82875 |
22 | e500Tx73125Rx83125 |
23 | e500Tx73375Rx83375 |
24 | e500Tx73625Rx83625 |
25 | e500Tx73875Rx83875 |
26 | e500Tx74125Rx84125 |
27 | e500Tx74375Rx84375 |
28 | e500Tx74625Rx84625 |
29 | v500Tx58500Rx61500 |
30 | v500Tx58500Rx62000 |
31 | v500Tx58500Rx62500 |
32 | v500Tx59000Rx61500 |
33 | v500Tx59000Rx62000 |
34 | v500Tx59000Rx62500 |
35 | v500Tx59500Rx61500 |
36 | v500Tx59500Rx62000 |
37 | v500Tx59500Rx62500 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sub10RadioMgmtTxPowerLimit The configured transmit power of radio link.
IMPORTANT: This object is controlled by transaction management.
Any changes to this object must be transactionally acknowledged
follow… | scalar | Sub10TxPowerLimit | .1.3.6.1.4.1.39003.5.2.1 |
| sub10RadioMgmtAPCMode Automatic Transmit Power Control. The initial setting of transmit
power used is defined by sub10RadioMgmtTxPower. If sub10RadioMgmtAtpc
is enabled then the transmit power may then… | scalar | Enumeration | .1.3.6.1.4.1.39003.5.2.3 |
| sub10RadioMgmtModulationMode Set the highest order Modulation Mode attempted by Adaptive Modulation.
IMPORTANT: This object is controlled by transaction management.
Any changes to this object must be transact… | scalar | Sub10ModulationMode | .1.3.6.1.4.1.39003.5.2.4 |
| sub10RadioMgmtAmod Adaptive Modulation mode. | scalar | Sub10State | .1.3.6.1.4.1.39003.5.2.5 |
| sub10RadioMgmtAlignmentMode Alignment mode is modeAlignment(1) if the alignment / reset cap
has been removed for > 5sec otherwise modeNormal(0). The alignment
mode can be manually changed by setting this obj… | scalar | Sub10AlignmentMode | .1.3.6.1.4.1.39003.5.2.6 |
| sub10RadioMgmtMWUChannelWidth MWU Channel width.
IMPORTANT: This object is controlled by transaction management.
Any changes to this object must be transactionally acknowledged
following a successful set thus … | scalar | Enumeration | .1.3.6.1.4.1.39003.5.2.8 |
| sub10RadioMgmtStats | node | - | .1.3.6.1.4.1.39003.5.2.9 |