sspmSourceProfileTTL
SSPM-MIB ·
.1.3.6.1.2.1.16.28.1.2.1.1.10
Object
column
r/w
Integer32
If non-zero, this specifies the value to place into the TTL field on transmission.
Context
- MIB
- SSPM-MIB
- OID
.1.3.6.1.2.1.16.28.1.2.1.1.10- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- sspmSourceProfileEntry
- Table
- sspmSourceProfileTable
- Siblings
- 17
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sspmSourceProfileInstance An arbitrary index. | column | Unsigned32 | .1.3.6.1.2.1.16.28.1.2.1.1.1 |
| sspmSourceProfileNoFrag When true, the 'Don't Fragment Bit' should be set
on the packet header. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.16.28.1.2.1.1.11 |
| sspmSourceProfile8021Tagging IEEE 802.1Q tagging used in IEEE 802.1D bridged
environments.
A value of -1 indicates that the packets are untagged.
A value of 0 to 65535 is the val… | column | Integer32 | .1.3.6.1.2.1.16.28.1.2.1.1.12 |
| sspmSourceProfileUsername An optional username used by the application protocol. | column | SYSAPPL-MIBUtf8String | .1.3.6.1.2.1.16.28.1.2.1.1.13 |
| sspmSourceProfilePassword An optional password used by the application protocol. | column | SYSAPPL-MIBUtf8String | .1.3.6.1.2.1.16.28.1.2.1.1.14 |
| sspmSourceProfileParameter An optional parameter used by the application protocol.
For DNS, this would be the hostname or IP. For HTTP,
this would be the URL. For nntp, this would be the
news group. For … | column | OctetString | .1.3.6.1.2.1.16.28.1.2.1.1.15 |
| sspmSourceProfileOwner Name of the management station/application that
set up the profile. | column | RMON-MIBOwnerString | .1.3.6.1.2.1.16.28.1.2.1.1.16 |
| sspmSourceProfileStorageType The storage type of this sspmSourceProfileEntry. If the
value of this object is 'permanent', no objects in this row
need to be writable. | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.16.28.1.2.1.1.17 |
| sspmSourceProfileStatus Status of this profile.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value.
Once this object is set… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.16.28.1.2.1.1.18 |
| sspmSourceProfileType The AppLocalIndex value that uniquely identifies the
measurement per the APM-MIB. In order to create a row
in this table, there must be a corresponding row in the
sspmCapabilitie… | column | APM-MIBAppLocalIndex | .1.3.6.1.2.1.16.28.1.2.1.1.2 |
| sspmSourceProfilePacketSize The size of packet to be transmitted in bytes. The
size accounts for all data within the IPv4 or IPv6
payloads, excluding the IP headers, IP header options
and link-level protoco… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.16.28.1.2.1.1.3 |
| sspmSourceProfilePacketFillType Indicates how the packet is filled.
'random' indicates that the packet contains random
data patterns. This is probe and implementation
dependent.
'p… | column | Enumeration | .1.3.6.1.2.1.16.28.1.2.1.1.4 |
| sspmSourceProfilePacketFillValue The string value with which to fill the packet. If
sspmSourceProfilePacketFillType is set to 'pattern',
then this pattern is repeated until the packet is
sspmSourcePacketSize in … | column | OctetString | .1.3.6.1.2.1.16.28.1.2.1.1.5 |
| sspmSourceProfileTOS Represents the TOS field in the IP packet header. The
value of this object defaults to zero if not set. | column | Integer32 | .1.3.6.1.2.1.16.28.1.2.1.1.6 |
| sspmSourceProfileFlowLabel This object is used to specify the Flow Label in a IPv6
packet (RFC 2460) to force special handling by the IPv6
routers; e.g., non-default quality-of-service handling.
… | column | Integer32 | .1.3.6.1.2.1.16.28.1.2.1.1.7 |
| sspmSourceProfileLooseSrcRteFill In the event that the test should run over a
specific route, the intent is to force the route using the
Loose Source Route option in IPv4 [RFC791] and
IPv6 [RFC2460]. This object… | column | OctetString | .1.3.6.1.2.1.16.28.1.2.1.1.8 |
| sspmSourceProfileLooseSrcRteLen In the event that the test should run over a
specific route, the intent is to force the route.
This attribute specifies the length of data to
be copied from the sspmSourceProfileL… | column | Integer32 | .1.3.6.1.2.1.16.28.1.2.1.1.9 |