sspmSinkSourceAddressType
SSPM-MIB ·
.1.3.6.1.2.1.16.28.1.5.1.1.3
Object
The type of Internet address of the source.
Context
- MIB
- SSPM-MIB
- OID
.1.3.6.1.2.1.16.28.1.5.1.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- sspmSinkEntry
- Table
- sspmSinkTable
- Siblings
- 10
Syntax
INET-ADDRESS-MIBInetAddressType
- Source
- INET-ADDRESS-MIBInetAddressType
- Base type
Enumeration
Values & Constraints
Type Values
0 | unknown |
1 | ipv4 |
2 | ipv6 |
3 | ipv4z |
4 | ipv6z |
16 | dns |
25 | l2vpn |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sspmSinkInstance An index. When the measurement is for a round-trip
measurement, then this table entry is on the same probe as
the corresponding sspmSourceEntry, and the value of this
attribute s… | column | Unsigned32 | .1.3.6.1.2.1.16.28.1.5.1.1.1 |
| sspmSinkStorageType The storage type of this sspmSinkEntry. If the value
of this object is 'permanent', no objects in this row
need to be writable. | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.16.28.1.5.1.1.10 |
| sspmSinkStatus Status of this conceptual row.
An entry may not exist in the active state unless all
objects in the entry have an appropriate value.
Once this object is set to acti… | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.16.28.1.5.1.1.11 |
| sspmSinkType The AppLocalIndex value that uniquely identifies the
measurement per the APM-MIB. In order to create a row
in this table, there must be a corresponding row in the
sspmCapabilitie… | column | APM-MIBAppLocalIndex | .1.3.6.1.2.1.16.28.1.5.1.1.2 |
| sspmSinkSourceAddress The Internet address of the source. The formatting
of this object is controlled by the sspmSinkSourceAddressType
object above.
This object should be set only to a … | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.16.28.1.5.1.1.4 |
| sspmSinkExpectedRate The expected rate at which packets will arrive. | column | SspmMicroSeconds | .1.3.6.1.2.1.16.28.1.5.1.1.5 |
| sspmSinkEnable Indicates if the sink is enabled or not. | column | SNMPv2-TCTruthValue | .1.3.6.1.2.1.16.28.1.5.1.1.6 |
| sspmSinkExpectedFirstSequenceNum The expected first sequence number of packets.
This is used by the sink to determine if packets
were lost at the initiation of the test. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.16.28.1.5.1.1.7 |
| sspmSinkLastSequenceNumber The last sequence number received. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.2.1.16.28.1.5.1.1.8 |
| sspmSinkLastSequenceInvalid The number of packets that arrived whose
sequence number was not one plus the value of
sspmSinkLastSequenceNumber. | column | SNMPv2-SMICounter32 | .1.3.6.1.2.1.16.28.1.5.1.1.9 |