sensorProbeTypeName
SPAGENT-MIB ·
.1.3.6.1.4.1.3854.1.2.2.1.118
Object
node
No description available.
Context
- MIB
- SPAGENT-MIB
- OID
.1.3.6.1.4.1.3854.1.2.2.1.118- Type
- node
- Parent
- sensorProbeEntry
- Siblings
- 80
- Children
- 34
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sensorProbeHost mandatory The Host of this sensor, this is the IP address | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.3854.1.2.2.1.1 |
| sensorProbeSnmpTrapPort mandatory SP Only: Port number used to access trap snmp | scalar | RFC1155-SMIGauge | .1.3.6.1.4.1.3854.1.2.2.1.100 |
| sensorProbeSnmpIndexingMode mandatory CP8 Only: Snmp table index starting from 0 or 1 | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.101 |
| sensorProbeNotifyBoot mandatory SP2 Only: Enable Notify on boot up | scalar | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.103 |
| sensorProbeDelayNotifyBoot mandatory SP2 Only: Delay time for boot up notify | scalar | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.104 |
| sensorProbeSmtpPort mandatory SMTP Port number used to send email | scalar | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.105 |
| sensorProbeReboot mandatory Reboot SP2/SP8 set to 1 | scalar | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.106 |
| sensorProbeServerEnable mandatory Enable database changed notify feature | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.107 |
| sensorProbeFirmwareVersion mandatory Current firmware version | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.108 |
| sensorProbeProductType mandatory Product type | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.109 |
| sensorProbeRequestResendTrap mandatory SP only: Send immediately all traps by set to 1 | scalar | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.110 |
| sensorProbeSeparateEmail mandatory SP only: Separate Email by set 1 for not Separate Email set 0 | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.112 |
| sensorProbeMailCustom mandatory SP only: Custom mail is removed 'http://' in the mail footer | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.113 |
| sensorProbeUntidePassword mandatory Use web password as SNMP password | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.114 |
| sensorProbeReloadNetwork mandatory Set 1 for reload network seting | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.116 |
| sensorProbeStatusNumber | node | - | .1.3.6.1.4.1.3854.1.2.2.1.117 |
| sensorProbeProductRevision mandatory SP only: Revision number | scalar | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.119 |
| sensorProbePowerMeter | node | - | .1.3.6.1.4.1.3854.1.2.2.1.125 |
| sensorProbeTempTable mandatory This table contains the data for every Temperature Sensor in the SensorArray. Each row in the table contains data for a different Temperature Sensor. | table | - | .1.3.6.1.4.1.3854.1.2.2.1.16 |
| sensorProbeHumidityTable mandatory This table contains the data for every Humidity Sensor in the SensorArray. Each row in the table contains data for a different Humidity Sensor. | table | - | .1.3.6.1.4.1.3854.1.2.2.1.17 |
| sensorProbeSwitchTable mandatory This table contains the data for every Switch Sensor in the SensorArray. Each row in the table contains data for a different Switch Sensor. | table | - | .1.3.6.1.4.1.3854.1.2.2.1.18 |
| sensorProbeOtherSensor | node | - | .1.3.6.1.4.1.3854.1.2.2.1.19 |
| sensorProbeUseDHCP mandatory To use DHCP enter a 1, to use a static IP address enter a 2 | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.2 |
| sensorProbeDebug mandatory SP only: Turn on or off debug messages | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.20 |
| sensorProbeTrapResend mandatory If traps for Warning or Error should be resent. Traps for Normal status are sent once | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.22 |
| sensorProbeTrapResendInterval mandatory How often to resend mail or Traps. Enter the number of seconds from 15 to 65535. Mail for WARNING and ERROR are resent at this interval. Traps for Normal status are sent once | scalar | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.23 |
| sensorProbeSendTraps mandatory Turn on or off the sending of traps | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.24 |
| sensorProbeTrapDestination mandatory The IP address of the trap destination | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.3854.1.2.2.1.25 |
| sensorProbeTrapCommunity mandatory The community string of the trap destination | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.26 |
| sensorProbeDefaultGateway mandatory If the destination is on another network, enter the IP address of the router | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.3854.1.2.2.1.27 |
| sensorProbeSubnetMask mandatory If the trap destination uses the default gateway | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.3854.1.2.2.1.28 |
| sensorProbeRouteAdd mandatory SP only: Up to 4, Manual additions to the routing table in the form, Network IP Address, Netmask, Gateway IP address | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.29 |
| sensorProbeMAC mandatory The MAC address of this system | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.3 |
| sensorProbeSendMail mandatory Turn on or off the sending of Mail | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.30 |
| sensorProbeMailRecpt mandatory The email address of the Recipient | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.31 |
| sensorProbeMailFrom mandatory The email address of the Sender | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.32 |
| sensorProbeMailSMTP mandatory The Address of the SMTP server | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.33 |
| sensorProbeMailJpgInline mandatory If the jpg for this event is sent as an http link or is included with mail as an attachment | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.34 |
| sensorProbeMailResendInterval mandatory How often to resend mail or Traps. Enter the number of seconds from 10 to 60. Mail for WARNING and ERROR are resent at this interval. Mail for Normal status are sent once | scalar | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.36 |
| sensorProbeMailMaxResend mandatory The maximum number of times to resend mail. If set to 0 only send once. The maximum value is 5 | scalar | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.37 |
| sensorProbeMailLastStatus mandatory The status of the most recent attempt to send an email | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.39 |
| sensorProbeSetCommunity mandatory The sensorProbe community string used for snmp Sets | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.4 |
| sensorProbeSupportMailRcpt mandatory SP8L only: E-Mail address of support | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.40 |
| sensorProbeCameraServerTable mandatory CP8 Only: This table contains the Camera Server features, This allows the sensorProbe to connect to a sensorProbe | table | - | .1.3.6.1.4.1.3854.1.2.2.1.42 |
| sensorProbeGetCommunity mandatory The sensorProbe community string used for snmp Gets | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.5 |
| sensorProbeTrapMailPollInterval mandatory SP Only: How often the sensor thresholds are tested before sending traps or mail. This can vary from 3 to 15 seconds | scalar | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.50 |
| sensorProbeSendTestMail mandatory Send out an email test message | scalar | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.51 |
| sensorProbeLastSystemError mandatory A text string containing the description of the last system error | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.52 |
| sensorProbeDataCollectionPeriod mandatory The number of minutes between collections of the data logger. This can vary from 1 to 60 minutes | scalar | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.53 |
| sensorProbeMailTimeout mandatory The number of seconds to wait for a timeout while sending email This can vary from 10 to 30 seconds | scalar | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.54 |
| sensorProbeAutoSense mandatory Enable Auto-sense feature | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.55 |
| sensorProbeChecksum mandatory SP Only: The Flash Checksum, computed dynamically whenever this object is read | scalar | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.56 |
| sensorProbeUsePassword mandatory Determines whether or not the set and get community are used to check for access rights | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.57 |
| sensorProbeDisplayLogo mandatory Enable or Disable the display of the logo | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.59 |
| sensorProbeTrapType mandatory Whether to generate a trap that covers all sensors, a specific trap for each sensor, or both types of traps | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.60 |
| sensorProbeMailCC mandatory The email address of the CC | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.61 |
| sensorProbeAllowIPChange mandatory This disables the changing of the IP address. The default is to enable changing the IP address | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.62 |
| sensorProbeTimeOfDay mandatory The time of day in the format day/month/year hour(1-24):minutes:seconds for example 23/10/02 12:45:06 | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.65 |
| sensorProbeEnableSysLog mandatory This enables sysLog Messages,including logging to the Net. The Destination IP of the net messages is the same as the source IP of the sender of this command | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.66 |
| sensorProbeReadSysLog mandatory Return the sysLog Message in the snmp PDU and if enableLogToNetAndFlash in sensorProbeEnableSysLog, also send in debug message format, A Write of a 2 will return all of the messag… | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.67 |
| sensorProbeClearSysLog mandatory Delete all entries in the sys log | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.68 |
| sensorProbeSyslogDestIP mandatory The IP Address of the Syslog server. Note: This must be in dotted decimal form | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.3854.1.2.2.1.69 |
| sensorProbeSyslogPort mandatory The Port Number of the Syslog server. | scalar | RFC1155-SMIGauge | .1.3.6.1.4.1.3854.1.2.2.1.70 |
| sensorProbeSetSyslogMsgPrefix mandatory SP Only: The Prefix message of the Syslog message | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.71 |
| sensorProbeTimeZone mandatory System time zone | scalar | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.81 |
| sensorProbeMegaVersion mandatory Version number of mega board | scalar | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.83 |
| sensorProbeNtpMode mandatory Mode to synchronous with ntp server | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.84 |
| sensorProbeNtpServer mandatory NTP server which this machine synchronous with | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.85 |
| sensorProbeSMTPAuth mandatory This enables the SMTP authentication | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.87 |
| sensorProbeSMTPLogin mandatory The username used to login into SMTP server | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.88 |
| sensorProbeSMTPPassword mandatory The password used to login into SMTP server | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.89 |
| sensorProbeDNSServer mandatory IP address of the DNS server | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.3854.1.2.2.1.90 |
| sensorProbeAltWebPort mandatory The alternative for a port number 80 used to access the web interface | scalar | RFC1155-SMIGauge | .1.3.6.1.4.1.3854.1.2.2.1.91 |
| sensorProbeNumberOfSensorPort mandatory The number of sensor ports(regardless of their current state) | scalar | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.92 |
| sensorProbeSendTrapsAlive mandatory On or off send keep alive traps. | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.93 |
| sensorProbeTrapReIntervalAlive mandatory Time between each keep alive trap. | scalar | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.94 |
| sensorProbeUseCamera mandatory On or off camera. | scalar | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.95 |
| sensorProbeAdcCalibratePort mandatory Calibrate value for analog sensor. | scalar | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.96 |
| sensorProbeMailSubject mandatory Email Subject. | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.98 |
| sensorProbeSnmpPort mandatory SP Only: Port number used to access snmp | scalar | RFC1155-SMIGauge | .1.3.6.1.4.1.3854.1.2.2.1.99 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sensorProbeTypeTemperatureName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.1 |
| sensorProbeTypeWaterName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.10 |
| sensorProbeTypeSecurityName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.11 |
| sensorProbeTypeSirenName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.12 |
| sensorProbeTypeThermostatName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.128 |
| sensorProbeTypeVirtualName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.129 |
| sensorProbeTypeRelayName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.13 |
| sensorProbeTypeSoundName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.130 |
| sensorProbeTypeSoftMotionName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.131 |
| sensorProbeTypeNoSignalName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.132 |
| sensorProbeTypePowerMeterName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.134 |
| sensorProbeTypeSHT11Name mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.135 |
| sensorProbeTypeADE7763Name mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.136 |
| sensorProbeTypeACvoltageName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.14 |
| sensorProbeTypeADE7763VRMSName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.15 |
| sensorProbeTypeADE7763IRMSName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.16 |
| sensorProbeTypeADE7763WattName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.17 |
| sensorProbeTypeADE7763WatthourName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.18 |
| sensorProbeTypePCF8574XRelayName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.19 |
| sensorProbeTypeSHT11HumidityName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.2 |
| sensorProbeTypeThermocoupleName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.20 |
| sensorProbeTypeSmokeName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.21 |
| sensorProbeTypeXDryName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.22 |
| sensorProbeTypeTemperatureArrayName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.23 |
| sensorProbeTypeWaterRopeName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.24 |
| sensorProbeTypeFuelLevelName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.25 |
| sensorProbeTypeTankSenderName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.26 |
| sensorProbeTypeSHT11TempName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.3 |
| sensorProbeType4to20MAName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.4 |
| sensorProbeTypeDCvoltageName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.5 |
| sensorProbeTypeAirflowName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.6 |
| sensorProbeTypeDrycontactInoutName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.7 |
| sensorProbeTypeDrycontactInputName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.8 |
| sensorProbeTypeMotionName mandatory A Description of Sensor Type Name on web interface | scalar | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.118.9 |