sensorProbeTimeOfDay

SPAGENT-MIB · .1.3.6.1.4.1.3854.1.2.2.1.65
MIB view Table view

Object

scalar mandatory r/w RFC1213-MIBDisplayString 
The time of day in the format day/month/year hour(1-24):minutes:seconds for example 23/10/02 12:45:06

Context

MIB
SPAGENT-MIB
OID
.1.3.6.1.4.1.3854.1.2.2.1.65
Type
scalar
Access
readwrite
Status
mandatory
Parent
sensorProbeEntry
Siblings
80

Syntax

RFC1213-MIBDisplayString
Source
RFC1213-MIBDisplayString
Base type
OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
sensorProbeHost mandatory
The Host of this sensor, this is the IP address
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.3854.1.2.2.1.1
sensorProbeSnmpTrapPort mandatory
SP Only: Port number used to access trap snmp
scalarRFC1155-SMIGauge.1.3.6.1.4.1.3854.1.2.2.1.100
sensorProbeSnmpIndexingMode mandatory
CP8 Only: Snmp table index starting from 0 or 1
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.101
sensorProbeNotifyBoot mandatory
SP2 Only: Enable Notify on boot up
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.103
sensorProbeDelayNotifyBoot mandatory
SP2 Only: Delay time for boot up notify
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.104
sensorProbeSmtpPort mandatory
SMTP Port number used to send email
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.105
sensorProbeReboot mandatory
Reboot SP2/SP8 set to 1
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.106
sensorProbeServerEnable mandatory
Enable database changed notify feature
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.107
sensorProbeFirmwareVersion mandatory
Current firmware version
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.108
sensorProbeProductType mandatory
Product type
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.109
sensorProbeRequestResendTrap mandatory
SP only: Send immediately all traps by set to 1
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.110
sensorProbeSeparateEmail mandatory
SP only: Separate Email by set 1 for not Separate Email set 0
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.112
sensorProbeMailCustom mandatory
SP only: Custom mail is removed 'http://' in the mail footer
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.113
sensorProbeUntidePassword mandatory
Use web password as SNMP password
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.114
sensorProbeReloadNetwork mandatory
Set 1 for reload network seting
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.116
sensorProbeStatusNumbernode-.1.3.6.1.4.1.3854.1.2.2.1.117
sensorProbeTypeNamenode-.1.3.6.1.4.1.3854.1.2.2.1.118
sensorProbeProductRevision mandatory
SP only: Revision number
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.119
sensorProbePowerMeternode-.1.3.6.1.4.1.3854.1.2.2.1.125
sensorProbeTempTable mandatory
This table contains the data for every Temperature Sensor in the SensorArray. Each row in the table contains data for a different Temperature Sensor.
table-.1.3.6.1.4.1.3854.1.2.2.1.16
sensorProbeHumidityTable mandatory
This table contains the data for every Humidity Sensor in the SensorArray. Each row in the table contains data for a different Humidity Sensor.
table-.1.3.6.1.4.1.3854.1.2.2.1.17
sensorProbeSwitchTable mandatory
This table contains the data for every Switch Sensor in the SensorArray. Each row in the table contains data for a different Switch Sensor.
table-.1.3.6.1.4.1.3854.1.2.2.1.18
sensorProbeOtherSensornode-.1.3.6.1.4.1.3854.1.2.2.1.19
sensorProbeUseDHCP mandatory
To use DHCP enter a 1, to use a static IP address enter a 2
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.2
sensorProbeDebug mandatory
SP only: Turn on or off debug messages
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.20
sensorProbeTrapResend mandatory
If traps for Warning or Error should be resent. Traps for Normal status are sent once
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.22
sensorProbeTrapResendInterval mandatory
How often to resend mail or Traps. Enter the number of seconds from 15 to 65535. Mail for WARNING and ERROR are resent at this interval. Traps for Normal status are sent once
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.23
sensorProbeSendTraps mandatory
Turn on or off the sending of traps
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.24
sensorProbeTrapDestination mandatory
The IP address of the trap destination
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.3854.1.2.2.1.25
sensorProbeTrapCommunity mandatory
The community string of the trap destination
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.26
sensorProbeDefaultGateway mandatory
If the destination is on another network, enter the IP address of the router
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.3854.1.2.2.1.27
sensorProbeSubnetMask mandatory
If the trap destination uses the default gateway
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.3854.1.2.2.1.28
sensorProbeRouteAdd mandatory
SP only: Up to 4, Manual additions to the routing table in the form, Network IP Address, Netmask, Gateway IP address
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.29
sensorProbeMAC mandatory
The MAC address of this system
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.3
sensorProbeSendMail mandatory
Turn on or off the sending of Mail
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.30
sensorProbeMailRecpt mandatory
The email address of the Recipient
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.31
sensorProbeMailFrom mandatory
The email address of the Sender
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.32
sensorProbeMailSMTP mandatory
The Address of the SMTP server
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.33
sensorProbeMailJpgInline mandatory
If the jpg for this event is sent as an http link or is included with mail as an attachment
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.34
sensorProbeMailResendInterval mandatory
How often to resend mail or Traps. Enter the number of seconds from 10 to 60. Mail for WARNING and ERROR are resent at this interval. Mail for Normal status are sent once
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.36
sensorProbeMailMaxResend mandatory
The maximum number of times to resend mail. If set to 0 only send once. The maximum value is 5
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.37
sensorProbeMailLastStatus mandatory
The status of the most recent attempt to send an email
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.39
sensorProbeSetCommunity mandatory
The sensorProbe community string used for snmp Sets
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.4
sensorProbeSupportMailRcpt mandatory
SP8L only: E-Mail address of support
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.40
sensorProbeCameraServerTable mandatory
CP8 Only: This table contains the Camera Server features, This allows the sensorProbe to connect to a sensorProbe
table-.1.3.6.1.4.1.3854.1.2.2.1.42
sensorProbeGetCommunity mandatory
The sensorProbe community string used for snmp Gets
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.5
sensorProbeTrapMailPollInterval mandatory
SP Only: How often the sensor thresholds are tested before sending traps or mail. This can vary from 3 to 15 seconds
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.50
sensorProbeSendTestMail mandatory
Send out an email test message
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.51
sensorProbeLastSystemError mandatory
A text string containing the description of the last system error
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.52
sensorProbeDataCollectionPeriod mandatory
The number of minutes between collections of the data logger. This can vary from 1 to 60 minutes
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.53
sensorProbeMailTimeout mandatory
The number of seconds to wait for a timeout while sending email This can vary from 10 to 30 seconds
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.54
sensorProbeAutoSense mandatory
Enable Auto-sense feature
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.55
sensorProbeChecksum mandatory
SP Only: The Flash Checksum, computed dynamically whenever this object is read
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.56
sensorProbeUsePassword mandatory
Determines whether or not the set and get community are used to check for access rights
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.57
sensorProbeDisplayLogo mandatory
Enable or Disable the display of the logo
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.59
sensorProbeTrapType mandatory
Whether to generate a trap that covers all sensors, a specific trap for each sensor, or both types of traps
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.60
sensorProbeMailCC mandatory
The email address of the CC
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.61
sensorProbeAllowIPChange mandatory
This disables the changing of the IP address. The default is to enable changing the IP address
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.62
sensorProbeEnableSysLog mandatory
This enables sysLog Messages,including logging to the Net. The Destination IP of the net messages is the same as the source IP of the sender of this command
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.66
sensorProbeReadSysLog mandatory
Return the sysLog Message in the snmp PDU and if enableLogToNetAndFlash in sensorProbeEnableSysLog, also send in debug message format, A Write of a 2 will return all of the messag…
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.67
sensorProbeClearSysLog mandatory
Delete all entries in the sys log
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.68
sensorProbeSyslogDestIP mandatory
The IP Address of the Syslog server. Note: This must be in dotted decimal form
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.3854.1.2.2.1.69
sensorProbeSyslogPort mandatory
The Port Number of the Syslog server.
scalarRFC1155-SMIGauge.1.3.6.1.4.1.3854.1.2.2.1.70
sensorProbeSetSyslogMsgPrefix mandatory
SP Only: The Prefix message of the Syslog message
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.71
sensorProbeTimeZone mandatory
System time zone
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.81
sensorProbeMegaVersion mandatory
Version number of mega board
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.83
sensorProbeNtpMode mandatory
Mode to synchronous with ntp server
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.84
sensorProbeNtpServer mandatory
NTP server which this machine synchronous with
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.85
sensorProbeSMTPAuth mandatory
This enables the SMTP authentication
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.87
sensorProbeSMTPLogin mandatory
The username used to login into SMTP server
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.88
sensorProbeSMTPPassword mandatory
The password used to login into SMTP server
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.89
sensorProbeDNSServer mandatory
IP address of the DNS server
scalarRFC1155-SMIIpAddress.1.3.6.1.4.1.3854.1.2.2.1.90
sensorProbeAltWebPort mandatory
The alternative for a port number 80 used to access the web interface
scalarRFC1155-SMIGauge.1.3.6.1.4.1.3854.1.2.2.1.91
sensorProbeNumberOfSensorPort mandatory
The number of sensor ports(regardless of their current state)
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.92
sensorProbeSendTrapsAlive mandatory
On or off send keep alive traps.
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.93
sensorProbeTrapReIntervalAlive mandatory
Time between each keep alive trap.
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.94
sensorProbeUseCamera mandatory
On or off camera.
scalarEnumeration.1.3.6.1.4.1.3854.1.2.2.1.95
sensorProbeAdcCalibratePort mandatory
Calibrate value for analog sensor.
scalarInteger32.1.3.6.1.4.1.3854.1.2.2.1.96
sensorProbeMailSubject mandatory
Email Subject.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.98
sensorProbeSnmpPort mandatory
SP Only: Port number used to access snmp
scalarRFC1155-SMIGauge.1.3.6.1.4.1.3854.1.2.2.1.99