sensorProbeTempSirenActiveStatus
SPAGENT-MIB ·
.1.3.6.1.4.1.3854.1.2.2.1.16.1.32
Object
column
mandatory
r/w
Enumeration
Sensor status that will activate the siren
Context
- MIB
- SPAGENT-MIB
- OID
.1.3.6.1.4.1.3854.1.2.2.1.16.1.32- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- sensorProbeTempEntry
- Table
- sensorProbeTempTable
- Siblings
- 64
Syntax
Enumeration
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sensorProbeTempDescription mandatory A Description of this sensor | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.16.1.1 |
| sensorProbeTempLowCritical mandatory How cold this sensor gets before it sends a critical event | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.10 |
| sensorProbeTempRearm mandatory The number of degrees to rearm the status. For example if status goes from normal to warning, the temp must go down spTempRearm degrees below warning before the status goes to nor… | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.11 |
| sensorProbeTempDegreeType mandatory The degrees are in fahrenheit(0) or in celsius(1) | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.12 |
| sensorProbeTempSensorType mandatory The type of temperture sensor | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.13 |
| sensorProbeTempDegreeRaw mandatory SP Only: The raw degree data from the temperature sensor, slightly higher resolution | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.14 |
| sensorProbeTempEmailTrapLimit mandatory Enable email/trap limit feature | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.16 |
| sensorProbeTempEmailTrapSchedule mandatory SP Only: Email/trap limit schedule for this sensor | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.16.1.17 |
| sensorProbeTempEmailTrapInterval mandatory Minimum time between each [email/trap:SP, only trap:CP8] (can be from 0 to 60 minutes). | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.18 |
| sensorProbeTempSendNormalTrap mandatory Enable sending email/trap when sensor goes to normal | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.19 |
| sensorProbeTempLocation mandatory The physical location of this sensor | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.16.1.2 |
| sensorProbeTempDelayError mandatory Time in seconds after the sensor has been in error status before report as an error | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.20 |
| sensorProbeTempDelayNormal mandatory Time in seconds after the sensor change from error to normal before report as normal | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.21 |
| sensorProbeTempIndex mandatory The index into the temperature sensor table | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.22 |
| sensorProbeTempRelayCycleTime mandatory Relay toggle period in seconds for Cycle action. | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.23 |
| sensorProbeTempRelayOnPort mandatory The sensor port that the relay will listen to. If this is set to 255, then the relay will not listen to any sensor ports | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.24 |
| sensorProbeTempRelayActiveStatus mandatory Sensor status that will activate the relay | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.25 |
| sensorProbeTempRelayAction mandatory What the relay will do when the listened to port status turns to the specified active status. | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.26 |
| sensorProbeTempEmailInterval mandatory CP8 Only: Minimum time between each email (can be from 0 to 60 minutes) | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.27 |
| sensorProbeTempIndexCount mandatory Number of Temperature sensor online | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.28 |
| sensorProbeTempOffset mandatory Temperature Offset reading | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.29 |
| sensorProbeTempDegree mandatory The degrees in this sensor | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.3 |
| sensorProbeTempSirenCycleTime mandatory Siren toggle period in seconds for Cycle action. | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.30 |
| sensorProbeTempSirenOnPort mandatory The sensor port that the siren will listen to. If this is set to 255, then the siren will not listen to any sensor ports | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.31 |
| sensorProbeTempSirenAction mandatory What the siren will do when the listened to port status turns to the specified active status. | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.33 |
| sensorProbeTempAcknowledgement mandatory Acknowledged sensor error and stop notification | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.34 |
| sensorProbeTempSirenDelayAlarm mandatory Siren delay in seconds before start Alarm. | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.35 |
| sensorProbeTempURL mandatory Sensor URL link. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.16.1.36 |
| sensorProbeTempOpenURL mandatory Open URL in this browser or open in a new window. | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.37 |
| sensorProbeTempDatacollectType mandatory Type of datacollect to collect. | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.38 |
| sensorProbeTempContTimeHighCritical mandatory Continuous time for this sensor to be in High Critical before accepting new Status. | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.39 |
| sensorProbeTempStatus mandatory The current status of this Sensor | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.4 |
| sensorProbeTempContTimeHighWarning mandatory Continuous time for this sensor to be in High Warning before accepting new Status. | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.40 |
| sensorProbeTempContTimeNormal mandatory Continuous time for this sensor to be in Normal before accepting new Status. | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.41 |
| sensorProbeTempContTimeLowWarning mandatory Continuous time for this sensor to be in Low Warning before accepting new Status. | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.42 |
| sensorProbeTempContTimeLowCritical mandatory Continuous time for this sensor to be in Low Critical before accepting new Status. | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.43 |
| sensorProbeTempContTimeSensorError mandatory Continuous time for this sensor to be in Sensor Error before accepting new Status. | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.44 |
| sensorProbeTempCalendar mandatory Enable or disable the calendar filtering working hours of sensor. | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.45 |
| sensorProbeThermostatIndex mandatory A unique value for each sensor thermostat port. | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.46 |
| sensorProbeThermostatDescription mandatory A Description of this sensor thermostat | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.16.1.47 |
| sensorProbeThermostatValue mandatory The value in this sensor | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.48 |
| sensorProbeThermostatOnline mandatory If this Sensor is currently online | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.49 |
| sensorProbeTempOnline mandatory If this Sensor is currently online | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.5 |
| sensorProbeThermostatGoOnline mandatory To put online enter a 1, to take offline enter a 2 | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.50 |
| sensorProbeThermostatMode mandatory To select the thermostat mode for working on time-bases(1) or normal(0). | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.51 |
| sensorProbeThermostatRelayControlPort mandatory To select a relay port to be controled by this thermostat sensor. | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.52 |
| sensorProbeThermostatNormalAction1 mandatory Profile1: Thermostat normal action for controlling a relay sensor. | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.53 |
| sensorProbeThermostatHighLimit1 mandatory Profile1: When this sersor higher than thermostat high limit, it will take a high limit action. | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.54 |
| sensorProbeThermostatHighLimitAction1 mandatory Profile1: Thermostat high limit action for controlling a relay sensor. | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.55 |
| sensorProbeThermostatLowLimit1 mandatory Profile1: When this sersor higher than thermostat low limit, it will take a normal limit action. | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.56 |
| sensorProbeThermostatLowLimitAction1 mandatory Profile1: Thermostat low limit action for controlling a relay sensor. | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.57 |
| sensorProbeThermostatNormalAction2 mandatory Profile2: Thermostat normal action for controlling a relay sensor. | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.58 |
| sensorProbeThermostatHighLimit2 mandatory Profile2: When this sersor higher than thermostat high limit, it will take a high limit action. | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.59 |
| sensorProbeTempGoOnline mandatory To put online enter a 1, to take offline enter a 2 | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.6 |
| sensorProbeThermostatHighLimitAction2 mandatory Profile2: Thermostat high limit action for controlling a relay sensor. | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.60 |
| sensorProbeThermostatLowLimit2 mandatory Profile2: When this sersor higher than thermostat low limit, it will take a normal limit action. | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.61 |
| sensorProbeThermostatLowLimitAction2 mandatory Profile2: Thermostat low limit action for controlling a relay sensor. | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.62 |
| sensorProbeThermostatEnableTime mandatory Time to enable on Thermostat | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.16.1.63 |
| sensorProbeTempSendNormalMail mandatory Enable sending email when sensor goes to normal | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.64 |
| sensorProbeTempSendTrap mandatory Enable sending trap when sensor change status | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.65 |
| sensorProbeTempSendMail mandatory Enable sending email when sensor change status | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.16.1.66 |
| sensorProbeTempHighWarning mandatory How hot this sensor gets before it sends a warning | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.7 |
| sensorProbeTempHighCritical mandatory How hot this sensor gets before it sends a critical event | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.8 |
| sensorProbeTempLowWarning mandatory How cold this sensor gets before it sends a warning | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.16.1.9 |