sensorProbeSwitchRelayActiveStatus

SPAGENT-MIB · .1.3.6.1.4.1.3854.1.2.2.1.18.1.20
MIB view Table view

Object

column mandatory r/w Enumeration 
Sensor status that will activate the relay

Context

MIB
SPAGENT-MIB
OID
.1.3.6.1.4.1.3854.1.2.2.1.18.1.20
Type
column
Access
readwrite
Status
mandatory
Parent
sensorProbeSwitchEntry
Table
sensorProbeSwitchTable
Siblings
48

Syntax

Enumeration

Values & Constraints

Object Constraints
range: 1-255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
sensorProbeSwitchDescription mandatory
A Description of this sensor Switch
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.18.1.1
sensorProbeSwitchEmailTrapLimit mandatory
Enable email/trap limit feature
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.11
sensorProbeSwitchEmailTrapSchedule mandatory
SP Only: Email/trap limit schedule for this sensor
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.18.1.12
sensorProbeSwitchEmailTrapInterval mandatory
Minimum time between each [email/trap:SP, only trap:CP8] (can be from 0 to 60 minutes)
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.18.1.13
sensorProbeSwitchSendNormalTrap mandatory
Enable sending email/trap when sensor goes to normal
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.14
sensorProbeSwitchDelayError mandatory
Time in seconds after the sensor has been in error status before report as an error
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.18.1.15
sensorProbeSwitchDelayNormal mandatory
Time in seconds after the sensor change from error to normal before report as normal
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.18.1.16
sensorProbeSwitchIndex mandatory
The index into the Switch sensor table
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.18.1.17
sensorProbeSwitchRelayCycleTime mandatory
Relay toggle period in seconds for Cycle action.
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.18.1.18
sensorProbeSwitchRelayOnPort mandatory
The sensor port that the relay will listen to. If this is set to 255, then the relay will not listen to any sensor ports
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.18.1.19
sensorProbeSwitchLocation mandatory
The physical location of this sensor Switch
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.18.1.2
sensorProbeSwitchRelayAction mandatory
What the relay will do when the listened to port status turns to the specified active status.
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.21
sensorProbeSwitchEmailInterval mandatory
CP8 Only: Minimum time between each email (can be from 0 to 60 minutes)
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.18.1.22
sensorProbeSwitchRelayOutputVoltStatus mandatory
SP Only: The current voltage status of the relay
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.23
sensorProbeSwitchManualRelayCycleTime mandatory
Relay toggle period in seconds for Manual Cycle action.
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.18.1.24
sensorProbeSwitchManualRelayAction mandatory
Control the relay manualy
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.25
sensorProbeSwitchRelayDescOn mandatory
Description of relay On
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.18.1.26
sensorProbeSwitchRelayDescOff mandatory
Description of relay Off
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.18.1.27
sensorProbeSwitchIndexCount mandatory
Number of Switch sensor online
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.18.1.28
sensorProbeSwitchSirenCycleTime mandatory
Siren toggle period in seconds for Cycle action.
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.18.1.29
sensorProbeSwitchStatus mandatory
The current status of this Sensor, only input switches have a status
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.3
sensorProbeSwitchSirenOnPort mandatory
The sensor port that the siren will listen to. If this is set to 255, then the siren will not listen to any sensor ports
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.18.1.30
sensorProbeSwitchSirenActiveStatus mandatory
Sensor status that will activate the siren
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.31
sensorProbeSwitchSirenAction mandatory
What the siren will do when the listened to port status turns to the specified active status.
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.32
sensorProbeSwitchAcknowledgement mandatory
Acknowledged sensor error and stop notification
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.33
sensorProbeSwitchSirenDelayAlarm mandatory
Siren delay in seconds before start Alarm.
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.18.1.34
sensorProbeSwitchURL mandatory
Sensor URL link.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.18.1.35
sensorProbeSwitchOpenURL mandatory
Open URL in this browser or open in a new window.
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.36
sensorProbeSwitchContTimeHighCritical mandatory
Continuous time for this sensor to be in High Critical before accepting new Status.
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.18.1.37
sensorProbeSwitchContTimeNormal mandatory
Continuous time for this sensor to be in Normal before accepting new Status.
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.18.1.39
sensorProbeSwitchOnline mandatory
If this Sensor is currently online
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.4
sensorProbeSwitchCalendar mandatory
Enable or disable the calendar filtering working hours of sensor.
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.43
sensorProbeSwitchRelayControlMode mandatory
Relay Control Mode used for selecting the mode to control a relay.
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.44
sensorProbeSwitchSirenControlMode mandatory
Siren Control Mode used for selecting the mode to control a siren.
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.45
sensorProbeSwitchSendNormalMail mandatory
Enable sending email when sensor goes to normal
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.46
sensorProbeSwitchSendTrap mandatory
Enable sending trap when sensor change status
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.47
sensorProbeSwitchSendMail mandatory
Enable sending email when sensor change status
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.48
sensorProbeSwitchWaterRopeLeakLocation mandatory
Location of leakage of water rope sensor.
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.18.1.49
sensorProbeSwitchGoOnline mandatory
To put online enter a 1, to take offline enter a 2
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.5
sensorProbeSwitchWaterRopeLength mandatory
Length of water rope sensor.
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.18.1.50
sensorProbeSwitchWaterRopeUnit mandatory
Display unit of water rope sensor.
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.51
sensorProbeSwitchWaterRopeImpedance mandatory
Sensing wire impedance per meter value times 100
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.18.1.52
sensorProbeSwitchWaterRopeRaw mandatory
Raw value of location or length in ohms
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.18.1.53
sensorProbeSwitchWaterRopeType mandatory
Water rope sensing cable type
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.55
sensorProbeSwitchDirection mandatory
To set a switch to input enter 0. To set a switch to output enter 1
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.6
sensorProbeSwitchNormalState mandatory
The normal state of an input switch. If an input switch is in this state it is normal, else it is critical. An open switch senses +5 volts. A closed switch senses 0 volts.
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.7
sensorProbeSwitchOutputLevel mandatory
An output swith can be set to this level
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.8
sensorProbeSensorType mandatory
Enter the type of this Sensor
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.18.1.9