sensorProbeSwitchIndexCount
SPAGENT-MIB ·
.1.3.6.1.4.1.3854.1.2.2.1.18.1.28
Object
column
mandatory
Integer32
Number of Switch sensor online
Context
- MIB
- SPAGENT-MIB
- OID
.1.3.6.1.4.1.3854.1.2.2.1.18.1.28- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- sensorProbeSwitchEntry
- Table
- sensorProbeSwitchTable
- Siblings
- 48
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sensorProbeSwitchDescription mandatory A Description of this sensor Switch | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.18.1.1 |
| sensorProbeSwitchEmailTrapLimit mandatory Enable email/trap limit feature | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.11 |
| sensorProbeSwitchEmailTrapSchedule mandatory SP Only: Email/trap limit schedule for this sensor | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.18.1.12 |
| sensorProbeSwitchEmailTrapInterval mandatory Minimum time between each [email/trap:SP, only trap:CP8] (can be from 0 to 60 minutes) | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.18.1.13 |
| sensorProbeSwitchSendNormalTrap mandatory Enable sending email/trap when sensor goes to normal | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.14 |
| sensorProbeSwitchDelayError mandatory Time in seconds after the sensor has been in error status before report as an error | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.18.1.15 |
| sensorProbeSwitchDelayNormal mandatory Time in seconds after the sensor change from error to normal before report as normal | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.18.1.16 |
| sensorProbeSwitchIndex mandatory The index into the Switch sensor table | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.18.1.17 |
| sensorProbeSwitchRelayCycleTime mandatory Relay toggle period in seconds for Cycle action. | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.18.1.18 |
| sensorProbeSwitchRelayOnPort mandatory The sensor port that the relay will listen to. If this is set to 255, then the relay will not listen to any sensor ports | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.18.1.19 |
| sensorProbeSwitchLocation mandatory The physical location of this sensor Switch | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.18.1.2 |
| sensorProbeSwitchRelayActiveStatus mandatory Sensor status that will activate the relay | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.20 |
| sensorProbeSwitchRelayAction mandatory What the relay will do when the listened to port status turns to the specified active status. | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.21 |
| sensorProbeSwitchEmailInterval mandatory CP8 Only: Minimum time between each email (can be from 0 to 60 minutes) | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.18.1.22 |
| sensorProbeSwitchRelayOutputVoltStatus mandatory SP Only: The current voltage status of the relay | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.23 |
| sensorProbeSwitchManualRelayCycleTime mandatory Relay toggle period in seconds for Manual Cycle action. | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.18.1.24 |
| sensorProbeSwitchManualRelayAction mandatory Control the relay manualy | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.25 |
| sensorProbeSwitchRelayDescOn mandatory Description of relay On | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.18.1.26 |
| sensorProbeSwitchRelayDescOff mandatory Description of relay Off | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.18.1.27 |
| sensorProbeSwitchSirenCycleTime mandatory Siren toggle period in seconds for Cycle action. | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.18.1.29 |
| sensorProbeSwitchStatus mandatory The current status of this Sensor, only input switches have a status | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.3 |
| sensorProbeSwitchSirenOnPort mandatory The sensor port that the siren will listen to. If this is set to 255, then the siren will not listen to any sensor ports | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.18.1.30 |
| sensorProbeSwitchSirenActiveStatus mandatory Sensor status that will activate the siren | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.31 |
| sensorProbeSwitchSirenAction mandatory What the siren will do when the listened to port status turns to the specified active status. | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.32 |
| sensorProbeSwitchAcknowledgement mandatory Acknowledged sensor error and stop notification | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.33 |
| sensorProbeSwitchSirenDelayAlarm mandatory Siren delay in seconds before start Alarm. | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.18.1.34 |
| sensorProbeSwitchURL mandatory Sensor URL link. | column | RFC1213-MIBDisplayString | .1.3.6.1.4.1.3854.1.2.2.1.18.1.35 |
| sensorProbeSwitchOpenURL mandatory Open URL in this browser or open in a new window. | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.36 |
| sensorProbeSwitchContTimeHighCritical mandatory Continuous time for this sensor to be in High Critical before accepting new Status. | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.18.1.37 |
| sensorProbeSwitchContTimeNormal mandatory Continuous time for this sensor to be in Normal before accepting new Status. | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.18.1.39 |
| sensorProbeSwitchOnline mandatory If this Sensor is currently online | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.4 |
| sensorProbeSwitchCalendar mandatory Enable or disable the calendar filtering working hours of sensor. | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.43 |
| sensorProbeSwitchRelayControlMode mandatory Relay Control Mode used for selecting the mode to control a relay. | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.44 |
| sensorProbeSwitchSirenControlMode mandatory Siren Control Mode used for selecting the mode to control a siren. | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.45 |
| sensorProbeSwitchSendNormalMail mandatory Enable sending email when sensor goes to normal | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.46 |
| sensorProbeSwitchSendTrap mandatory Enable sending trap when sensor change status | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.47 |
| sensorProbeSwitchSendMail mandatory Enable sending email when sensor change status | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.48 |
| sensorProbeSwitchWaterRopeLeakLocation mandatory Location of leakage of water rope sensor. | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.18.1.49 |
| sensorProbeSwitchGoOnline mandatory To put online enter a 1, to take offline enter a 2 | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.5 |
| sensorProbeSwitchWaterRopeLength mandatory Length of water rope sensor. | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.18.1.50 |
| sensorProbeSwitchWaterRopeUnit mandatory Display unit of water rope sensor. | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.51 |
| sensorProbeSwitchWaterRopeImpedance mandatory Sensing wire impedance per meter value times 100 | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.18.1.52 |
| sensorProbeSwitchWaterRopeRaw mandatory Raw value of location or length in ohms | column | Integer32 | .1.3.6.1.4.1.3854.1.2.2.1.18.1.53 |
| sensorProbeSwitchWaterRopeType mandatory Water rope sensing cable type | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.55 |
| sensorProbeSwitchDirection mandatory To set a switch to input enter 0. To set a switch to output enter 1 | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.6 |
| sensorProbeSwitchNormalState mandatory The normal state of an input switch. If an input switch is in this state it is normal, else it is critical. An open switch senses +5 volts. A closed switch senses 0 volts. | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.7 |
| sensorProbeSwitchOutputLevel mandatory An output swith can be set to this level | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.8 |
| sensorProbeSensorType mandatory Enter the type of this Sensor | column | Enumeration | .1.3.6.1.4.1.3854.1.2.2.1.18.1.9 |