sensorProbeSwitchEmailTrapInterval

SPAGENT-MIB · .1.3.6.1.4.1.3854.1.2.2.1.18.1.13

Object

column mandatory r/w Integer32

Minimum time between each [email/trap:SP, only trap:CP8] (can be from 0 to 60 minutes)

Context

MIB: SPAGENT-MIB
OID: .1.3.6.1.4.1.3854.1.2.2.1.18.1.13
Type: column
Access: readwrite
Status: mandatory
Parent: sensorProbeSwitchEntry
Table: sensorProbeSwitchTable
Siblings: 48

Syntax

Integer32

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
sensorProbeSwitchDescription mandatory A Description of this sensor Switch	column	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.1`
sensorProbeSwitchEmailTrapLimit mandatory Enable email/trap limit feature	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.11`
sensorProbeSwitchEmailTrapSchedule mandatory SP Only: Email/trap limit schedule for this sensor	column	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.12`
sensorProbeSwitchSendNormalTrap mandatory Enable sending email/trap when sensor goes to normal	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.14`
sensorProbeSwitchDelayError mandatory Time in seconds after the sensor has been in error status before report as an error	column	Integer32	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.15`
sensorProbeSwitchDelayNormal mandatory Time in seconds after the sensor change from error to normal before report as normal	column	Integer32	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.16`
sensorProbeSwitchIndex mandatory The index into the Switch sensor table	column	Integer32	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.17`
sensorProbeSwitchRelayCycleTime mandatory Relay toggle period in seconds for Cycle action.	column	Integer32	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.18`
sensorProbeSwitchRelayOnPort mandatory The sensor port that the relay will listen to. If this is set to 255, then the relay will not listen to any sensor ports	column	Integer32	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.19`
sensorProbeSwitchLocation mandatory The physical location of this sensor Switch	column	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.2`
sensorProbeSwitchRelayActiveStatus mandatory Sensor status that will activate the relay	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.20`
sensorProbeSwitchRelayAction mandatory What the relay will do when the listened to port status turns to the specified active status.	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.21`
sensorProbeSwitchEmailInterval mandatory CP8 Only: Minimum time between each email (can be from 0 to 60 minutes)	column	Integer32	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.22`
sensorProbeSwitchRelayOutputVoltStatus mandatory SP Only: The current voltage status of the relay	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.23`
sensorProbeSwitchManualRelayCycleTime mandatory Relay toggle period in seconds for Manual Cycle action.	column	Integer32	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.24`
sensorProbeSwitchManualRelayAction mandatory Control the relay manualy	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.25`
sensorProbeSwitchRelayDescOn mandatory Description of relay On	column	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.26`
sensorProbeSwitchRelayDescOff mandatory Description of relay Off	column	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.27`
sensorProbeSwitchIndexCount mandatory Number of Switch sensor online	column	Integer32	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.28`
sensorProbeSwitchSirenCycleTime mandatory Siren toggle period in seconds for Cycle action.	column	Integer32	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.29`
sensorProbeSwitchStatus mandatory The current status of this Sensor, only input switches have a status	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.3`
sensorProbeSwitchSirenOnPort mandatory The sensor port that the siren will listen to. If this is set to 255, then the siren will not listen to any sensor ports	column	Integer32	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.30`
sensorProbeSwitchSirenActiveStatus mandatory Sensor status that will activate the siren	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.31`
sensorProbeSwitchSirenAction mandatory What the siren will do when the listened to port status turns to the specified active status.	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.32`
sensorProbeSwitchAcknowledgement mandatory Acknowledged sensor error and stop notification	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.33`
sensorProbeSwitchSirenDelayAlarm mandatory Siren delay in seconds before start Alarm.	column	Integer32	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.34`
sensorProbeSwitchURL mandatory Sensor URL link.	column	RFC1213-MIBDisplayString	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.35`
sensorProbeSwitchOpenURL mandatory Open URL in this browser or open in a new window.	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.36`
sensorProbeSwitchContTimeHighCritical mandatory Continuous time for this sensor to be in High Critical before accepting new Status.	column	Integer32	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.37`
sensorProbeSwitchContTimeNormal mandatory Continuous time for this sensor to be in Normal before accepting new Status.	column	Integer32	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.39`
sensorProbeSwitchOnline mandatory If this Sensor is currently online	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.4`
sensorProbeSwitchCalendar mandatory Enable or disable the calendar filtering working hours of sensor.	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.43`
sensorProbeSwitchRelayControlMode mandatory Relay Control Mode used for selecting the mode to control a relay.	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.44`
sensorProbeSwitchSirenControlMode mandatory Siren Control Mode used for selecting the mode to control a siren.	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.45`
sensorProbeSwitchSendNormalMail mandatory Enable sending email when sensor goes to normal	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.46`
sensorProbeSwitchSendTrap mandatory Enable sending trap when sensor change status	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.47`
sensorProbeSwitchSendMail mandatory Enable sending email when sensor change status	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.48`
sensorProbeSwitchWaterRopeLeakLocation mandatory Location of leakage of water rope sensor.	column	Integer32	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.49`
sensorProbeSwitchGoOnline mandatory To put online enter a 1, to take offline enter a 2	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.5`
sensorProbeSwitchWaterRopeLength mandatory Length of water rope sensor.	column	Integer32	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.50`
sensorProbeSwitchWaterRopeUnit mandatory Display unit of water rope sensor.	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.51`
sensorProbeSwitchWaterRopeImpedance mandatory Sensing wire impedance per meter value times 100	column	Integer32	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.52`
sensorProbeSwitchWaterRopeRaw mandatory Raw value of location or length in ohms	column	Integer32	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.53`
sensorProbeSwitchWaterRopeType mandatory Water rope sensing cable type	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.55`
sensorProbeSwitchDirection mandatory To set a switch to input enter 0. To set a switch to output enter 1	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.6`
sensorProbeSwitchNormalState mandatory The normal state of an input switch. If an input switch is in this state it is normal, else it is critical. An open switch senses +5 volts. A closed switch senses 0 volts.	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.7`
sensorProbeSwitchOutputLevel mandatory An output swith can be set to this level	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.8`
sensorProbeSensorType mandatory Enter the type of this Sensor	column	Enumeration	`.1.3.6.1.4.1.3854.1.2.2.1.18.1.9`

Indexes