sensorProbeHumidityDescription

SPAGENT-MIB · .1.3.6.1.4.1.3854.1.2.2.1.17.1.1
MIB view Table view

Object

column mandatory r/w RFC1213-MIBDisplayString 
A Description of this sensor

Context

MIB
SPAGENT-MIB
OID
.1.3.6.1.4.1.3854.1.2.2.1.17.1.1
Type
column
Access
readwrite
Status
mandatory
Parent
sensorProbeHumidityEntry
Table
sensorProbeHumidityTable
Siblings
59

Syntax

RFC1213-MIBDisplayString
Source
RFC1213-MIBDisplayString
Base type
OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
sensorProbeHumidityLowCritical mandatory
How low the relative humidity this sensor measures before it becomes critical
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.10
sensorProbeHumidityRearm mandatory
The percent relative humidity to rearm the status. For example if status goes from normal to warning, the humidity must go down spAnalogueRearm below warning before the status goe…
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.11
sensorProbeHumidityRaw mandatory
The unformatted, raw, A/D value in this sensor. Contains more resolution than the formated percentage. This number can go from 0 to 1023 depending on the input voltage
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.13
sensorProbeHumidityLowVoltage mandatory
SP Only: The low voltage range for use in AtoD conversion.
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.14
sensorProbeHumidityHighVoltage mandatory
SP Only: The high voltage range for use in AtoD conversion.
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.15
sensorProbeHumidityEmailTrapLimit mandatory
Enable email/trap limit feature
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.17.1.17
sensorProbeHumidityEmailTrapSchedule mandatory
SP Only: Email/trap limit schedule for this sensor
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.17.1.18
sensorProbeHumidityEmailTrapInterval mandatory
Minimum time between each [email/trap:SP, only trap:CP8] (can be from 0 to 60 minutes)
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.19
sensorProbeHumidityLocation mandatory
The physical location of this sensor
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.17.1.2
sensorProbeHumiditySendNormalTrap mandatory
Enable sending email/trap when sensor goes to normal
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.17.1.20
sensorProbeHumidityDelayError mandatory
Time in seconds after the sensor has been in error status before report as an error
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.21
sensorProbeHumidityDelayNormal mandatory
Time in seconds after the sensor change from error to normal before report as normal
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.22
sensorProbeHumidityIndex mandatory
The index into the Humidity sensor table
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.23
sensorProbeHumidityAtoDAmountMaxVoltage mandatory
The maximum scale of DC voltage conversion.
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.24
sensorProbeHumidityAtoDAmountBaseVoltage mandatory
The base scale of DC voltage conversion.
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.25
sensorProbeHumidityAtoDTypeUnit mandatory
Type of scale for use in DC voltage conversion.
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.17.1.26
sensorProbeHumidityDcUnit mandatory
Display unit in DC voltage conversion.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.17.1.27
sensorProbeHumidityAtoDJumper mandatory
Selected voltage scale (jumper 0) in DC voltage conversion.
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.17.1.28
sensorProbeHumidityRelayCycleTime mandatory
Relay toggle period in seconds for Cycle action.
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.29
sensorProbeHumidityPercent mandatory
The relative humidity percentage measured by this sensor
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.3
sensorProbeHumidityRelayOnPort mandatory
The sensor port that the relay will listen to. If this is set to 255, then the relay will not listen to any sensor ports
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.30
sensorProbeHumidityRelayActiveStatus mandatory
Sensor status that will activate the relay
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.17.1.31
sensorProbeHumidityRelayAction mandatory
What the relay will do when the listened to port status turns to the specified active status.
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.17.1.32
sensorProbeHumidityEmailInterval mandatory
CP8 Only: Minimum time between each emial (can be from 0 to 60 minutes)
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.33
sensorProbeHumidity4to20mAUnit mandatory
Display unit in DC voltage conversion.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.17.1.34
sensorProbeHumidityIndexCount mandatory
Number of Humidity sensor online
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.35
sensorProbeHumidityOffset mandatory
Humidity Offset reading
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.36
sensorProbeHumiditySirenCycleTime mandatory
Siren toggle period in seconds for Cycle action.
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.37
sensorProbeHumiditySirenOnPort mandatory
The sensor port that the siren will listen to. If this is set to 255, then the siren will not listen to any sensor ports
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.38
sensorProbeHumiditySirenActiveStatus mandatory
Sensor status that will activate the siren
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.17.1.39
sensorProbeHumidityStatus mandatory
The current status of this Sensor
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.17.1.4
sensorProbeHumiditySirenAction mandatory
What the siren will do when the listened to port status turns to the specified active status.
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.17.1.40
sensorProbeHumidityAcknowledgement mandatory
Acknowledged sensor error and stop notification
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.17.1.41
sensorProbeHumiditySirenDelayAlarm mandatory
Siren delay in seconds before start Alarm.
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.42
sensorProbeHumidityURL mandatory
Sensor URL link.
columnRFC1213-MIBDisplayString.1.3.6.1.4.1.3854.1.2.2.1.17.1.43
sensorProbeHumidityOpenURL mandatory
Open URL in this browser or open in a new window.
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.17.1.44
sensorProbeHumidityDatacollectType mandatory
Type of datacollect to collect.
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.17.1.45
sensorProbeHumidityContTimeHighCritical mandatory
Continuous time for this sensor to be in High Critical before accepting new Status.
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.46
sensorProbeHumidityContTimeHighWarning mandatory
Continuous time for this sensor to be in High Warning before accepting new Status.
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.47
sensorProbeHumidityContTimeNormal mandatory
Continuous time for this sensor to be in Normal before accepting new Status.
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.48
sensorProbeHumidityContTimeLowWarning mandatory
Continuous time for this sensor to be in Low Warning before accepting new Status.
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.49
sensorProbeHumidityOnline mandatory
If this Sensor is currently online
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.17.1.5
sensorProbeHumidityContTimeLowCritical mandatory
Continuous time for this sensor to be in Low Critical before accepting new Status.
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.50
sensorProbeHumidityContTimeSensorError mandatory
Continuous time for this sensor to be in Sensor Error before accepting new Status.
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.51
sensorProbeHumidityCalendar mandatory
Enable or disable the calendar filtering working hours of sensor.
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.17.1.52
sensorProbeHumiditySendNormalMail mandatory
Enable sending email when sensor goes to normal
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.17.1.53
sensorProbeHumiditySendTrap mandatory
Enable sending trap when sensor change status
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.17.1.54
sensorProbeHumiditySendMail mandatory
Enable sending email when sensor change status
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.17.1.55
sensorProbeIDCVVoltateRatio mandatory
iDCV calibrate voltate ratio
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.56
sensorProbeIDCVErrorFlag mandatory
iDCV error flag
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.57
sensorProbeIDCVCalibrate mandatory
iDCV calibrate
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.58
sensorProbeAirFlowProtocolType mandatory
Air flow protocol type
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.17.1.59
sensorProbeHumidityGoOnline mandatory
To put online enter a 1, to take offline enter a 2
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.17.1.6
sensorProbeAirFlowSensitivity mandatory
Air flow (AFS00) sensitivity
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.60
sensorProbeAirFlowNormalState mandatory
Air flow (AFS00) normal state
columnEnumeration.1.3.6.1.4.1.3854.1.2.2.1.17.1.61
sensorProbeAirFlowCalibrate mandatory
Air flow (AFS00) normal state
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.62
sensorProbeHumidityHighWarning mandatory
How high the relative humidity this sensor measures before it sends a warning
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.7
sensorProbeHumidityHighCritical mandatory
How high the relative humidity this sensor measures before it becomes critical
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.8
sensorProbeHumidityLowWarning mandatory
How low the relative humidity this sensor measures before it sends a warning
columnInteger32.1.3.6.1.4.1.3854.1.2.2.1.17.1.9