speedDuplex
SNR-SWITCH-MIB ·
.1.3.6.1.4.1.40418.7.100.3.2.1.14
Object
column
r/w
Enumeration
The speed and duplex status of the port.
Context
- MIB
- SNR-SWITCH-MIB
- OID
.1.3.6.1.4.1.40418.7.100.3.2.1.14- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- priPortEntry
- Table
- priPortTable
- Siblings
- 30
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | auto |
1 | half10 |
2 | full10 |
3 | half100 |
4 | full100 |
5 | half1000 |
6 | full1000 |
7 | half-1000-M |
8 | half-1000-s |
9 | full-1000-M |
10 | full-1000-s |
13 | fx-100 |
14 | fx-100-phy |
15 | fx-100-no-phy |
16 | neg-10-auto |
17 | neg-10-full |
18 | neg-10-half |
19 | neg-10-100-auto |
20 | neg-10-100-full |
21 | neg-10-100-half |
22 | neg-10-100-1000-full |
23 | neg-10-100-1000-half |
24 | neg-full-10g |
25 | full-10g |
26 | full-40g |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portIndex port No. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.40418.7.100.3.2.1.1 |
| transmitBandwidth The transmit bandwidth of the port. Its unit is kbs.
Set 0 is no bandwidth. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.40418.7.100.3.2.1.10 |
| shutdown Close or open to specify the port. | column | Enumeration | .1.3.6.1.4.1.40418.7.100.3.2.1.12 |
| loopback Open or close to specify the wreath of
the port back to test the function. | column | Enumeration | .1.3.6.1.4.1.40418.7.100.3.2.1.13 |
| portMode port mode: 1 is access,2 is trunk,3 is hybrid | column | Enumeration | .1.3.6.1.4.1.40418.7.100.3.2.1.15 |
| pvid port of native vlan No. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.40418.7.100.3.2.1.16 |
| indicatesType Indicates the port type of the configuration of the switch. | column | Enumeration | .1.3.6.1.4.1.40418.7.100.3.2.1.17 |
| vctAction This object indicates the VCT action of the port, the value 1(standard mode) and value 2(shutdown mode) is permitted
when SET this entry though you can GET 1(processing) and 0(su… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.40418.7.100.3.2.1.18 |
| vctLastStatus Indicates the last VCT status of the port. | column | OctetString | .1.3.6.1.4.1.40418.7.100.3.2.1.19 |
| portName Name of the port. exp:financial. | column | OctetString | .1.3.6.1.4.1.40418.7.100.3.2.1.2 |
| portTrunkAllowedvlan trunk port allowed vlan list string | column | OctetString | .1.3.6.1.4.1.40418.7.100.3.2.1.20 |
| portHybridTaggedAllowedvlan hybrid port tagged allowed vlan list string | column | OctetString | .1.3.6.1.4.1.40418.7.100.3.2.1.21 |
| portHybridUntaggedAllowedvlan hybrid port untagged allowed vlan list string | column | OctetString | .1.3.6.1.4.1.40418.7.100.3.2.1.22 |
| portBandWidthUsage The percentage of the port's bandwidth usage | column | OctetString | .1.3.6.1.4.1.40418.7.100.3.2.1.23 |
| lastFiveMinInPktsPerSec last five minutes input packets/Sec. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.40418.7.100.3.2.1.24 |
| lastFiveMinOutPktsPerSec last five minutes output packets/Sec. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.40418.7.100.3.2.1.25 |
| lastFiveSecInPktsPerSec last five seconds input packets/Sec. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.40418.7.100.3.2.1.26 |
| lastFiveSecOutPktsPerSec last five seconds output packets/Sec. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.40418.7.100.3.2.1.27 |
| transceiverSn serial num of transceiver.if port is not a transceiver,value is null. | column | OctetString | .1.3.6.1.4.1.40418.7.100.3.2.1.28 |
| portBlockMode port block mode.value:
noblock: 0,
rate-violation block: 1,
loopback-detection block: 2,
unknown-protocol block: 3 | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.40418.7.100.3.2.1.29 |
| switchNum This value is denoting the number of swith in which this port resides.
For the non-stackable device,the value is always 1.
While for the stackable device, the value is real switch… | column | Integer32 | .1.3.6.1.4.1.40418.7.100.3.2.1.3 |
| portBlockState port shutdown mode.value:
noblock state: 0,
rate-violation block state: 1,
loopback-detection block state: 2,
unknown-protocol block state: 3 | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.40418.7.100.3.2.1.30 |
| portComboMediaType The media type of combo port | column | Enumeration | .1.3.6.1.4.1.40418.7.100.3.2.1.31 |
| portDiscardPktType port mode: 1 is tag,2 is untag;
3 is set no tag,4 is set no untag. | column | Enumeration | .1.3.6.1.4.1.40418.7.100.3.2.1.32 |
| slotNum This value is denoting the number of slot.
For the static slot,the value is 1,while for
the extended slot the value is real extended slot number. | column | Integer32 | .1.3.6.1.4.1.40418.7.100.3.2.1.4 |
| portType Type of expansion module in this port. | column | Enumeration | .1.3.6.1.4.1.40418.7.100.3.2.1.5 |
| flowControlStatus The flow-control status of the port.
Its functionality is exactly same as 'flow control' or 'no flow control' commands
in console mode. | column | Enumeration | .1.3.6.1.4.1.40418.7.100.3.2.1.6 |
| bandwidthControlStatus The bandwidth-control status of the port.
Its functionality is to stop the bandwidth control.
The only way to enable bandwidth control is to set receiveBandwidth or transmitBandw… | column | Enumeration | .1.3.6.1.4.1.40418.7.100.3.2.1.7 |
| maxBandwidth The max bandwidth of the port. | column | Enumeration | .1.3.6.1.4.1.40418.7.100.3.2.1.8 |
| receiveBandwidth The receive bandwidth of the port. Its unit is kbs.
The command 'bandwidth control 50 both' in console mode equals
setting both receiveBandwidth and transmitBandwidth to 50 kbs.
S… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.40418.7.100.3.2.1.9 |