sleUserFlowMatchFlags
SLE-QOS-MIB ·
.1.3.6.1.4.1.6296.101.10.3.1.1.21
Object
column
Bits
User Flow Matching Flags
Context
- MIB
- SLE-QOS-MIB
- OID
.1.3.6.1.4.1.6296.101.10.3.1.1.21- Type
- column
- Access
- readonly
- Status
- current
- Parent
- sleUserFlowEntry
- Table
- sleUserFlowTable
- Siblings
- 46
Syntax
Bits
Values & Constraints
Enumerated Values
0 | ufIngressPort |
1 | ufEgressPort |
2 | ufEthernetType |
3 | ufSrcMacAddress |
4 | ufDstMacAddress |
5 | ufVlanId |
6 | uf8021p |
7 | ufSrcIpAddress |
8 | ufSrcPrefixLength |
9 | ufDstIpAddress |
10 | ufDstPrefixLength |
11 | ufIpPktPriority |
12 | ufProtocolType |
13 | ufTcpFlag |
14 | ufSrcL4Port |
15 | ufDstL4Port |
16 | ufPacketLength |
17 | ufPriority |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| sleUserFlowName The name of this user flow. | column | OctetString | .1.3.6.1.4.1.6296.101.10.3.1.1.1 |
| sleUserFlowSrcPrefixLength Subnet mask. The length of 0 indicates a match of any address | column | Integer32 | .1.3.6.1.4.1.6296.101.10.3.1.1.10 |
| sleUserFlowDstIpAddr The IP address to match against the packet's
destination IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6296.101.10.3.1.1.11 |
| sleUserFlowDstPrefixLength Subnet mask. The length of 0 indicates a match of any address | column | Integer32 | .1.3.6.1.4.1.6296.101.10.3.1.1.12 |
| sleUserFlowIpPktPriorityType Description. | column | Enumeration | .1.3.6.1.4.1.6296.101.10.3.1.1.13 |
| sleUserFlowIpPktPriority The Priority value in incoming IP packet.
If sleUserFlowIpPktPriorityType is 1,
this value's range is 0-7.
If sleUserFlowIpPktPriorityType is 2,
this value's range is 0-63.
If s… | column | Integer32 | .1.3.6.1.4.1.6296.101.10.3.1.1.14 |
| sleUserFlowProtocolType The IP protocol type value | column | Integer32 | .1.3.6.1.4.1.6296.101.10.3.1.1.15 |
| sleUserFlowTcpFlag TCP Flags | column | Bits | .1.3.6.1.4.1.6296.101.10.3.1.1.16 |
| sleUserFlowSrcL4Port The source L4 port number, only valid for
TCP or UDP packets. | column | Integer32 | .1.3.6.1.4.1.6296.101.10.3.1.1.17 |
| sleUserFlowDstL4Port The destination L4 port number, only valid for
TCP or UDP packets. | column | Integer32 | .1.3.6.1.4.1.6296.101.10.3.1.1.18 |
| sleUserFlowPktLen The packet length of the incoming packet | column | Integer32 | .1.3.6.1.4.1.6296.101.10.3.1.1.19 |
| sleUserFlowIngressPorts Ingress port number | column | OctetString | .1.3.6.1.4.1.6296.101.10.3.1.1.2 |
| sleUserFlowValidFlags User Flow Valid Flags | column | Bits | .1.3.6.1.4.1.6296.101.10.3.1.1.20 |
| sleUserFlowPriority The priority of this user flow | column | Enumeration | .1.3.6.1.4.1.6296.101.10.3.1.1.22 |
| sleUserFlowMatchCounterId The counter index to be apply for the matched packets. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.10.3.1.1.23 |
| sleUserFlowMatchTrafficProfileId The traffic profile index to be apply
for the matched packets. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.10.3.1.1.24 |
| sleUserFlowMatchQueue TThe CoS value to be assign for the nomatched packets | column | Integer32 | .1.3.6.1.4.1.6296.101.10.3.1.1.25 |
| sleUserFlowMatchIpPktPriorityType The Priority type to be applied to incoming IP packet. | column | Enumeration | .1.3.6.1.4.1.6296.101.10.3.1.1.26 |
| sleUserFlowMatchIpPktPriority The Priority value in incoming IP packet.
If sleUserFlowMatchIpPktPriorityType is 1,
then this value's range is 0-7.
If sleUserFlowMatchIpPktPriorityType is 2,
then this value's… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.10.3.1.1.27 |
| sleUserFlowMatchRedirPort The port to redirect to a matched packet. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.10.3.1.1.28 |
| sleUserFlowMatchVid The vlan id to be assigned for the matched packets | column | Integer32 | .1.3.6.1.4.1.6296.101.10.3.1.1.29 |
| sleUserFlowEgressPorts Egress Port Number | column | OctetString | .1.3.6.1.4.1.6296.101.10.3.1.1.3 |
| sleUserFlowMatchDstMac Description. | column | OctetString | .1.3.6.1.4.1.6296.101.10.3.1.1.30 |
| sleUserFlowMatchPortMap Description. | column | OctetString | .1.3.6.1.4.1.6296.101.10.3.1.1.31 |
| sleUserFlowMatchEgressType Description. | column | Enumeration | .1.3.6.1.4.1.6296.101.10.3.1.1.32 |
| sleUserFlowMatchAction The action to be apply for matched packets. | column | Bits | .1.3.6.1.4.1.6296.101.10.3.1.1.33 |
| sleUserFlowNomatchCounterId The counter index to be apply for the nomatched packets. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.10.3.1.1.34 |
| sleUserFlowNomatchTrafficProfileId The traffic profile index to be apply
for the nomatched packets. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.10.3.1.1.35 |
| sleUserFlowNomatchQueue The CoS value to be assign for the nomatched packets | column | Integer32 | .1.3.6.1.4.1.6296.101.10.3.1.1.36 |
| sleUserFlowNomatchIpPktPriorityType The Priority type to be applied to incoming IP packet, in case nomatched. | column | Enumeration | .1.3.6.1.4.1.6296.101.10.3.1.1.37 |
| sleUserFlowNomatchIpPktPriority The Priority value in incoming IP packet.
If sleUserFlowNomatchIpPktPriorityType is 1,
then this value's range is 0-7.
If sleUserFlowNomatchIpPktPriorityType is 2,
then this val… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.10.3.1.1.38 |
| sleUserFlowNomatchRedirPort The port to redirect to nomatched packet. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.10.3.1.1.39 |
| sleUserFlowEthernetType The ethernet type value in incoming frames | column | Integer32 | .1.3.6.1.4.1.6296.101.10.3.1.1.4 |
| sleUserFlowNomatchVid The vlan id to be assigned for the nomatched packets | column | Integer32 | .1.3.6.1.4.1.6296.101.10.3.1.1.40 |
| sleUserFlowNomatchAction The action to be apply for nomatched packets. | column | Bits | .1.3.6.1.4.1.6296.101.10.3.1.1.41 |
| sleUserFlowMatchColorMarkingId The colormarking profile index to be apply for the matched packet. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.10.3.1.1.42 |
| sleUserFlowNomatchColorMarkingId The colormarking profile index to be apply for the unmatched packet. (not supported) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.6296.101.10.3.1.1.43 |
| sleUserFlowInnerVlan Inner VLAN ID in QinQ | column | Integer32 | .1.3.6.1.4.1.6296.101.10.3.1.1.44 |
| sleUserFlowInner8021p The value of the inner IEEE802.1p priority in the packet | column | Integer32 | .1.3.6.1.4.1.6296.101.10.3.1.1.45 |
| sleUserFlowMatchRoutePrimary The policy-based-routing primary route | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6296.101.10.3.1.1.46 |
| sleUserFlowMatchRouteSecondary The policy-based-routing secondary route | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6296.101.10.3.1.1.47 |
| sleUserFlowSrcMacAddr Source MAC address | column | OctetString | .1.3.6.1.4.1.6296.101.10.3.1.1.5 |
| sleUserFlowDstMacAddr Destination MAC address | column | OctetString | .1.3.6.1.4.1.6296.101.10.3.1.1.6 |
| sleUserFlowVlan VLAN ID | column | Integer32 | .1.3.6.1.4.1.6296.101.10.3.1.1.7 |
| sleUserFlow8021p The value of the IEEE802.1p priority in the packet | column | Integer32 | .1.3.6.1.4.1.6296.101.10.3.1.1.8 |
| sleUserFlowSrcIpAddr The IP address to match against the packet's
source IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.6296.101.10.3.1.1.9 |