slapmPRMonMaxRateHigh
SLAPM-MIB ·
.1.3.6.1.3.88.1.2.6.1.12
Object
The threshold for generating a
slapmPolicyRuleMonNotOkay notification, signalling
that a monitored maximum transfer rate has been exceeded.
A slapmPolicyRuleNotOkay notification is not
generated again for an slapmPRMonEntry until the
maximum transfer rate fails below
slapmPRMonMaxRateLow (a slapmPolicyRuleMonOkay
notification is then transmitted) and then raises above
slapmPRMonMaxRateHigh. This behavior reduces the
slapmPolicyRuleMonNotOkay notifications that are
transmitted.
A value of zero for this object is returned when the
slapmPRMonControl monitorMaxRate(1) is not
enabled. When enabled the default value for this object
is the max rate value specified in the associated
action definition plus 10%. If the action definition
doesn't have a max rate defined then there is no
default for this object and a value MUST be specified
prior to activating this entry when monitorMaxRate(1)
is selected.
Note: The corresponding slapmPRMonControl
BITS setting, enableAggregateTraps(3), MUST be selected in
order for any notification relating to this entry to
potentially be generated.
Context
- MIB
- SLAPM-MIB
- OID
.1.3.6.1.3.88.1.2.6.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Units
- kilobits per second
- Parent
- slapmPRMonEntry
- Table
- slapmPRMonTable
- Siblings
- 21
Syntax
kilobits per second SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| slapmPRMonOwnerIndex To facilitate the provisioning of access control by a
security administrator using the View-Based Access
Control Model (RFC 2575, VACM) for tables in which
multiple users may need… | column | OctetString | .1.3.6.1.3.88.1.2.6.1.1 |
| slapmPRMonMinRateLow The threshold for generating a
slapmPolicyRuleMonNotOkay notification, signalling
that a monitored minimum transfer rate has not been meet.
A slapmPolicyRuleMonNotO… | column | kilobits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.3.88.1.2.6.1.10 |
| slapmPRMonMinRateHigh The threshold for generating a slapmPolicyRuleMonOkay
notification, signalling that a monitored minimum
transfer rate has increased to an acceptable level.
A value … | column | kilobits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.3.88.1.2.6.1.11 |
| slapmPRMonMaxRateLow The threshold for generating a slapmPolicyRuleMonOkay
notification, signalling that a monitored maximum
transfer rate has fallen to an acceptable level.
A value of … | column | kilobits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.3.88.1.2.6.1.13 |
| slapmPRMonMaxDelayHigh The threshold for generating a
slapmPolicyRuleMonNotOkay notification, signalling
that a monitored maximum delay rate has been exceeded.
A slapmPolicyRuleMonNotOkay… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.3.88.1.2.6.1.14 |
| slapmPRMonMaxDelayLow The threshold for generating a slapmPolicyRuleMonOkay
notification, signalling that a monitored maximum delay
rate has fallen to an acceptable level.
A value of zer… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.3.88.1.2.6.1.15 |
| slapmPRMonMinInRateNotAchieves The number of times that a minimum transfer in rate
was not achieved. | column | SNMPv2-SMICounter32 | .1.3.6.1.3.88.1.2.6.1.16 |
| slapmPRMonMaxInRateExceeds The number of times that a maximum transfer in rate
was exceeded. | column | SNMPv2-SMICounter32 | .1.3.6.1.3.88.1.2.6.1.17 |
| slapmPRMonMaxDelayExceeds The number of times that a maximum delay in rate
was exceeded. | column | SNMPv2-SMICounter32 | .1.3.6.1.3.88.1.2.6.1.18 |
| slapmPRMonMinOutRateNotAchieves The number of times that a minimum transfer out rate
was not achieved. | column | SNMPv2-SMICounter32 | .1.3.6.1.3.88.1.2.6.1.19 |
| slapmPRMonSystemAddress Address of a system that an Policy definition relates to.
A zero length octet string can be used to indicate that
only a single system is being represented.
Otherwise, the length … | column | OctetString | .1.3.6.1.3.88.1.2.6.1.2 |
| slapmPRMonMaxOutRateExceeds The number of times that a maximum transfer out rate
was exceeded. | column | SNMPv2-SMICounter32 | .1.3.6.1.3.88.1.2.6.1.20 |
| slapmPRMonCurrentDelayRate The current delay rate for this entry. This is
calculated by taking the average of the TCP
round trip times for all associating
slapmSubcomponentTable entries within a interval. | column | milliseconds SNMPv2-SMIGauge32 | .1.3.6.1.3.88.1.2.6.1.21 |
| slapmPRMonRowStatus This object allows entries to be created and deleted
in the slapmPRMonTable. An entry in this table
is deleted by setting this object to destroy(6).
Removal of an … | column | SNMPv2-TCRowStatus | .1.3.6.1.3.88.1.2.6.1.22 |
| slapmPRMonIndex An slapmPolicyNameTable index, slapmPolicyNameIndex,
that points to the unique name associated with a
policy rule definition. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.3.88.1.2.6.1.3 |
| slapmPRMonControl The value of this object determines the type and level
of monitoring that is applied to a policy rule. The
value of this object can't be changed once the table
entry that it is a… | column | Bits | .1.3.6.1.3.88.1.2.6.1.4 |
| slapmPRMonStatus The value of this object indicates when a monitored
value has not meet a threshold or isn't meeting the
defined service level. The SlapmStatus TEXTUAL-CONVENTION
defines two leve… | column | SlapmStatus | .1.3.6.1.3.88.1.2.6.1.5 |
| slapmPRMonInterval The number of seconds that defines the sample period. | column | seconds Unsigned32 | .1.3.6.1.3.88.1.2.6.1.6 |
| slapmPRMonIntTime The timestamp for when the last interval ended. | column | SNMPv2-TCDateAndTime | .1.3.6.1.3.88.1.2.6.1.7 |
| slapmPRMonCurrentInRate Using the value of the corresponding
slapmPRMonInterval, slapmPolicyRuleStatsInOctets
is sampled and then divided by slapmPRMonInterval
to determine the current in transfer rate. | column | kilobits per second SNMPv2-SMIGauge32 | .1.3.6.1.3.88.1.2.6.1.8 |
| slapmPRMonCurrentOutRate Using the value of the corresponding
slapmPolicyMonInterval, slapmPolicyRuleStatsOutOctets
is sampled and then divided by slapmPRMonInterval
to determine the current out transfer … | column | kilobits per second SNMPv2-SMIGauge32 | .1.3.6.1.3.88.1.2.6.1.9 |