esPointValueInt
SL81-STD-MIB ·
.1.3.6.1.4.1.3052.5.1.1.1.1.6
Object
column
mandatory
r/w
Integer32
A number referring to the value of a point on an
EventSensor.
If the point class is temperature, then this object
is the temperature in its configured scale (default
is Fahrenheit).
If the point class is contact closure or relay, then
this object is either 0 (open) or 1 (closed).
If the point class is humidity, then this object
is the percent relative humidity.
If the point class is analog input, then this
object is the signed input value in tenths of the
configured units.
For any point class except relay, this object is
read-only.
For relays, setting this object to 1 closes the
relay, while setting it to 0 opens it. Setting it
to any value greater than 1 closes the relay for
that many seconds (up to 3600), after which time it
opens the relay. This works regardless of the
control mode of the relay.
Context
- MIB
- SL81-STD-MIB
- OID
.1.3.6.1.4.1.3052.5.1.1.1.1.6- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- esPointEntry
- Table
- esPointTable
- Siblings
- 8
Syntax
Integer32
Values & Constraints
Object Constraints
range: -32768-32767
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| esIndexES mandatory The part of the point index that refers to an
EventSensor.
The point index is a string of 3 numbers separated
by periods. It contains all the information
necessary… | column | Integer32 | .1.3.6.1.4.1.3052.5.1.1.1.1.1 |
| esIndexPC mandatory The part of the point index that refers to point class.
The point index is a string of 3 numbers separated by periods.
It contains all the information necessary for… | column | Integer32 | .1.3.6.1.4.1.3052.5.1.1.1.1.2 |
| esIndexPoint mandatory The part of the point index that delineates which
sensor on the EventSensor.
So this combined with esIndexPC (Point Class or type)
and esIndexES (which EventSensor)… | column | Integer32 | .1.3.6.1.4.1.3052.5.1.1.1.1.3 |
| esPointName mandatory The name of the point on an EventSensor. For example,
'AC temp' (in the case of the temperature sensor on an
EventSensor).
There can be multiple points of the same … | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.5.1.1.1.1.4 |
| esPointInEventState mandatory A number referring to the event state of a point
on an EventSensor. This number can have different
meanings depending on the point class.
If the point class is tem… | column | Integer32 | .1.3.6.1.4.1.3052.5.1.1.1.1.5 |
| esPointValueStr mandatory A string referring to the value of a point on an
EventSensor.
For contact closures and relays this object is
either 'Open' or 'Closed'.
For temperatu… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.5.1.1.1.1.7 |
| esPointTimeLastChange mandatory The time of the last time an event was
triggerred for a point on an EventSensor in
MM/DD/YY HH:MM:SS format.
For contact closures, the possible events are
Active an… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.5.1.1.1.1.8 |
| esPointTimetickLastChange mandatory The time of the last time an event was
triggerred for a point on an EventSensor in
100ths of seconds since reset.
For contact closures, the possible events are
Acti… | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.3052.5.1.1.1.1.9 |