esIndex

SL81-STD-MIB · .1.3.6.1.4.1.3052.5.2.1.2.1.1
MIB view Table view

Object

column mandatory Integer32 
This number refers to an EventSensor; it has the
same meaning as the esIndexES object (see above),
except that this object is used only within the
esTable branch.
              
This object's allowable values are 1 through 16,
and 200.  200 always refers to the EventSensor
inside the unit.  1 through 16 refer to additional
attached EventSensors.
              
The number corresponding to an EventSensor is
determined by the user at the initial configuration
time.  If there is an internal sensor in the unit,
it will always be the first item in the Sensor
Events setup menu.
              
For example, if a new EventSensor is configured as
the 2nd entry AFTER the internal EventSensor (if
one exists) in the Sensor Events Setup Menu, then
that EventSensor will be known from then on as
EventSensor 2.  All point indeces with esIndex=2
will now refer to that particular EventSensor.

Context

MIB
SL81-STD-MIB
OID
.1.3.6.1.4.1.3052.5.2.1.2.1.1
Type
column
Access
readonly
Status
mandatory
Parent
esEntry
Table
esTable
Siblings
16

Syntax

Integer32

Values & Constraints

Object Constraints
range: 1-200

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
esNumberNoiseSensors mandatory
The number of noise sensors on the EventSensor.
columnInteger32.1.3.6.1.4.1.3052.5.2.1.2.1.10
esNoiseReportingMode mandatory
Description of how noise sensor values should be interpreted.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.5.2.1.2.1.11
esNumberAirflowSensors mandatory
The number of airflow sensors on the EventSensor.
columnInteger32.1.3.6.1.4.1.3052.5.2.1.2.1.12
esAirflowReportingMode mandatory
Description of how airflow sensor values should be interpreted.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.5.2.1.2.1.13
esNumberAnalog mandatory
The number of analog inputs on the EventSensor.
columnInteger32.1.3.6.1.4.1.3052.5.2.1.2.1.14
esAnalogReportingMode mandatory
Description of how analog input values should be interpreted.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.5.2.1.2.1.15
esNumberRelayOutputs mandatory
The number of relay outputs on the EventSensor
columnInteger32.1.3.6.1.4.1.3052.5.2.1.2.1.16
esRelayReportingMode mandatory
Description of how relay output values should be interpreted.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.5.2.1.2.1.17
esName mandatory
The name of the EventSensor
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.5.2.1.2.1.2
esID mandatory
The factory-assigned ID of the EventSensor
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.5.2.1.2.1.3
esNumberTempSensors mandatory
The number of temperature sensors on the EventSensor
columnInteger32.1.3.6.1.4.1.3052.5.2.1.2.1.4
esTempReportingMode mandatory
Description of how temperature values should be interpreted.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.5.2.1.2.1.5
esNumberCCs mandatory
The number of contact closures on the EventSensor.
columnInteger32.1.3.6.1.4.1.3052.5.2.1.2.1.6
esCCReportingMode mandatory
Description of how CC values should be interpreted.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.5.2.1.2.1.7
esNumberHumidSensors mandatory
The number of humidity sensors on the EventSensor.
columnInteger32.1.3.6.1.4.1.3052.5.2.1.2.1.8
esHumidReportingMode mandatory
Description of how humidity sensor values should be interpreted.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.3052.5.2.1.2.1.9