xpdrConnAddMask
SL-XPDR-MIB ·
.1.3.6.1.4.1.4515.1.8.1.1.1.7
Object
column
r/w
Integer32
This object is a bit mask relevant only for 10G Muxponder entry.
It contains a bit for each Muxponder service.
To add a service the management should set the corresponding bit to 1.
To remove a service the bit should be set to 0.
For ODU allocation, the value of xpdrConnAddMask should be set to reflect the odus/time-slots
provisioned for the service according to the following rules:
a. For ODU1 the first byte is 0; for ODU0 the first byte is 1.
b. The second byte. Is equal to:
i. The 4 bits of the first nibble correspond to Uplink 1 allocated odus counted from right to left
ii. The 4 bits of the second nibble correspond to Uplink 2 allocated odus counted from right to left
c. The Third and Forth bytes keep bit-mask of the allocated time-slots within the odu.
Context
- MIB
- SL-XPDR-MIB
- OID
.1.3.6.1.4.1.4515.1.8.1.1.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- xpdrConnConfigEntry
- Table
- xpdrConnConfigTable
- Siblings
- 15
Syntax
Integer32
- Source
- COPS-PR-SPPIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| xpdrConnConfigIf1 The first XPDR interface. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.4515.1.8.1.1.1.1 |
| xpdrDirection This object is used for unidirectional services.
The upper port is the uplink as with the aps configuration.
The transponder on one side should be configured as TX and the peer as… | column | Enumeration | .1.3.6.1.4.1.4515.1.8.1.1.1.10 |
| xpdrConnConfigCpriRateControl This object is used to detrmine if the CPRI rate control should be active. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4515.1.8.1.1.1.11 |
| xpdrFaultPropagationDelay This object is used to determine the fault propagation delay.
The value 0 mean no delay, the value 1 means 100ms delay, the value 2 means 200ms delay etc.
0 is the default value. | column | Integer32 | .1.3.6.1.4.1.4515.1.8.1.1.1.12 |
| xpdrFecMode This object is used to determine the IEEE FEC mode for 10G and 16G services:
0 - No FEC (default)
1 - FEC Monitoring
2 - FEC Generation
3 - FEC Regeneration | column | Integer32 | .1.3.6.1.4.1.4515.1.8.1.1.1.13 |
| xpdrConnAddMask1 This object is a bit mask relevant only for 100G Muxponder entry.
It contains a bit for each tributary slot allocated to the service port from Uplink 1.
To incluse a tributary sl… | column | TsMaskBits | .1.3.6.1.4.1.4515.1.8.1.1.1.14 |
| xpdrConnAddMask2 This object is a bit mask relevant only for 100G Muxponder entry.
It contains a bit for each tributary slot allocated to the service port from Uplink 2.
To incluse a tributary sl… | column | TsMaskBits | .1.3.6.1.4.1.4515.1.8.1.1.1.15 |
| xpdrCryptoUser The user name of the crypto officer assigned to this service.
Default value is Crypto | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4515.1.8.1.1.1.16 |
| xpdrConnConfigIf2 The second XPDR interface. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.4515.1.8.1.1.1.2 |
| xpdrConnConfigRateControlAdmin This variable ask the rate of the traffic used
by this interface. Frequency is in Kbp/s.
The value 0-30 is used for rate control Bypass. | column | Integer32 | .1.3.6.1.4.1.4515.1.8.1.1.1.3 |
| xpdrConnConfigRateControlOper This variable tells the rate of the traffic used
by this interface. Frequency is in Kbp/s.
The value 0 returned for rate control Bypass. | column | Integer32 | .1.3.6.1.4.1.4515.1.8.1.1.1.4 |
| xpdrConnConfigLosPropagation This object is used to detrmine if the LOS propagation should be active. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4515.1.8.1.1.1.5 |
| xpdrServiceType The service type of the transponder. | column | XpdrServiceType | .1.3.6.1.4.1.4515.1.8.1.1.1.6 |
| xpdrMuxInbandAdmin This object is relevant only for muxponder.
up value means that the muxponder inband management is enabled. | column | Enumeration | .1.3.6.1.4.1.4515.1.8.1.1.1.8 |
| xpdrMuxInbandOper The operational state of the inband interface. | column | Enumeration | .1.3.6.1.4.1.4515.1.8.1.1.1.9 |