sonetPathDayUASs

SL-SONET-SUP-PM-MIB · .1.3.6.1.4.1.4515.1.6.3.2.1.17.1.10
MIB view Table view

Object

column PerfHist-TC-MIBPerfTotalCount 
The path unavailable second (UAS-P) is a count of 1-second
intervals for which the SONET STS-path was unavailable during a
previous 1-day interval.  The SONET STS-path becomes unavailable
at the onset of 10 contiguous SES-Ps.  The 10 SES-Ps are
included in unavailable time.  Once unavailable, the SONET
STS-path becomes available at the onset of 10 contiguous seconds
with no SES-Ps.  The 10 seconds with no SES-Ps are excluded from
unavailable time.

Context

MIB
SL-SONET-SUP-PM-MIB
OID
.1.3.6.1.4.1.4515.1.6.3.2.1.17.1.10
Type
column
Access
readonly
Status
current
Parent
sonetPathDayEntry
Table
sonetPathDayTable
Siblings
10

Syntax

PerfHist-TC-MIBPerfTotalCount
Source
PerfHist-TC-MIBPerfTotalCount
Base type
Unsigned32

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
sonetPathDayNumber
A number which identifies the 1-day interval for which the set of near-end path related statistics is available. The number is between 1 and n, where n is the number of 1-day int…
columnInteger32.1.3.6.1.4.1.4515.1.6.3.2.1.17.1.1
sonetPathDayFCs
The number path failures count during a day.
columnPerfHist-TC-MIBPerfTotalCount.1.3.6.1.4.1.4515.1.6.3.2.1.17.1.11
sonetPathDayTcaFlag
TRUE if one of the counters crossed the threshold during the day.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4515.1.6.3.2.1.17.1.12
sonetPathDayEBs
The number path blocks in which one or more bits are in error counted during a day.
columnPerfHist-TC-MIBPerfTotalCount.1.3.6.1.4.1.4515.1.6.3.2.1.17.1.13
sonetPathDayReset
Writing this object reset the PM counters of this interval.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4515.1.6.3.2.1.17.1.14
sonetPathDayStartTime
This variable indicates the date and time at which the 1-day interval of measurements began on this interface.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.4515.1.6.3.2.1.17.1.2
sonetPathDayValidData
This variable assumes the value true(1) if the data stored for this interval is both valid and complete. It is set to false(2) if the data stored for this interval is incomplete …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4515.1.6.3.2.1.17.1.3
sonetPathDayCVs
The path code violation (CV-P) count is the number of BIP-8 errors which were detected at the STS-path layer interface in a previous 1-day interval. CVs for the path layer are co…
columnPerfHist-TC-MIBPerfTotalCount.1.3.6.1.4.1.4515.1.6.3.2.1.17.1.5
sonetPathDayESs
The path errored second (ES-P) count is the number of 1-second intervals containing one or more EDC error (B3 byte), or one or more AIS-P, LOP-P, TIM-P or UNEQ-P defects which wer…
columnPerfHist-TC-MIBPerfTotalCount.1.3.6.1.4.1.4515.1.6.3.2.1.17.1.6
sonetPathDaySESs
The path severely errored second (SES-P) is a count of 1-second intervals containing sonetSevereErrorThreshold or more EDC error (B3 byte), or one or more AIS-P, LOP-P, TIM-P or U…
columnPerfHist-TC-MIBPerfTotalCount.1.3.6.1.4.1.4515.1.6.3.2.1.17.1.9