sonetLineDayCVs

SL-SONET-SUP-PM-MIB · .1.3.6.1.4.1.4515.1.6.3.1.4.5.1.5
MIB view Table view

Object

column PerfHist-TC-MIBPerfTotalCount 
The line code violation (CV-L) count is the number of BIP-8
errors which were detected at the SONET line layer
interface in a previous 1-day interval.  Each line BIP-8
can detect up to eight errors per STS-1 frame, with each error
incrementing the CV counter.  CVs for the line layer are
collected using the BIP-8s in the B2 byte located in the
line overhead of STS-1.  (Since all CVs on an STS-N line are
counted together, this is equivalent to counting each error in
the BIP-8N contained in the B2 bytes of the STS-N line
overhead.)  Thus, on an STS-N signal, up to 8 x N CVs may
occure in each STS-N frame.

Context

MIB
SL-SONET-SUP-PM-MIB
OID
.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.5
Type
column
Access
readonly
Status
current
Parent
sonetLineDayEntry
Table
sonetLineDayTable
Siblings
11

Syntax

PerfHist-TC-MIBPerfTotalCount
Source
PerfHist-TC-MIBPerfTotalCount
Base type
Unsigned32

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
sonetLineDayNumber
A number which identifies the 1-day interval for which the set of near-end line related statistics is available. The number is between 1 and n, where n is the number of 1-day int…
columnInteger32.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.1
sonetLineDayUASs
The line unavailable second (UAS-L) is a count of 1-second intervals for which the SONET line was unavailable during a previous 1-day interval. The SONET line becomes unavailable…
columnPerfHist-TC-MIBPerfTotalCount.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.10
sonetLineDayPSC
The number of protection switching occured.
columnPerfHist-TC-MIBPerfTotalCount.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.11
sonetLineDayPSD
The length of time in seconds, where the protection unit was in service and the working unit was out of service, during the day.
columnPerfHist-TC-MIBPerfTotalCount.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.12
sonetLineDayFCs
The number of failure counts occured during the day.
columnPerfHist-TC-MIBPerfTotalCount.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.13
sonetLineDayTcaFlag
TRUE if one of the counters crossed the threshold during the day.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.14
sonetLineDayReset
Writing this object reset the PM counters of this interval.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.15
sonetLineDayStartTime
This variable indicates the date and time at which this 1-day interval of near-end line measurements began on this interface.
columnSNMPv2-TCDateAndTime.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.2
sonetLineDayValidData
This variable assumes the value true(1) if the data stored for this interval is both valid and complete. It is set to false(2) if the data stored for this interval is incomplete …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.3
sonetLineDayESs
The line errored second (ES-L) count is the number of 1-second intervals containing one or more EDC error (B2 byte), or one or more AIS-L defects which were encountered by the SON…
columnPerfHist-TC-MIBPerfTotalCount.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.6
sonetLineDaySESs
The line severely errored second (SES-L) is a count of 1-second intervals containing sonetSevereErrorThreshold or more EDC errors (B2 byte) or one or more AIS-L defects which were…
columnPerfHist-TC-MIBPerfTotalCount.1.3.6.1.4.1.4515.1.6.3.1.4.5.1.9