slOSPRConfigLossDetectThresh
SL-OSA-MIB ·
.1.3.6.1.4.1.4515.1.1.18.1.2.1.6
Object
The threshold for channel LOS detection . Units: 0.1 dBm. Default: -40 dBm
Context
- MIB
- SL-OSA-MIB
- OID
.1.3.6.1.4.1.4515.1.1.18.1.2.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- slOSPRConfigEntry
- Table
- slOSPRConfigTable
- Siblings
- 16
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| slOSPRConfigLineIndex The ifIndex of the OSA port 1-8. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.4515.1.1.18.1.2.1.1 |
| slOSPRConfigDL OSNR Mode: left offset to noise location.
Units: 0.1 Ghz.
Default: 20GHz - 100GHz spacing
10GHz - 50GHz spacing | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4515.1.1.18.1.2.1.10 |
| slOSPRConfigDU OSNR Mode: right offset to noise location.
Units: 0.1 Ghz.
Default: 20GHz - 100GHz spacing
10GHz - 50GHz spacing | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4515.1.1.18.1.2.1.11 |
| slOSPRConfigNL OSNR Mode: noise lower.
Units: 0.1 Ghz.
Default: 20GHz - 100GHz spacing
10GHz - 50GHz spacing | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4515.1.1.18.1.2.1.12 |
| slOSPRConfigNU OSNR Mode: noise upper.
Units: 0.1 Ghz.
Default: 20GHz - 100GHz grid
10GHz - 50GHz grid | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4515.1.1.18.1.2.1.13 |
| slOSPRConfigBWX OSNR Mode: The offset in tenths of a dB down from <CS>.
Used as a threshold to determine the bandwidth over which to integrate the signal power.
Units: 0.1 dB.
Default: 3 dB | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4515.1.1.18.1.2.1.14 |
| slOSPRConfigNTR OSNR Mode: noise tag range.
Units: 0.1 GHz.
Default: 20GHz - 100GHz grid
10GHz - 50GHz grid | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4515.1.1.18.1.2.1.15 |
| slOSPRConfigRBW OSNR Mode: resolution band width (tenths of GHz).
Units: 0.1 GHz.
Default: 12.5 GHz | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4515.1.1.18.1.2.1.16 |
| slOSPRConfigBWT CP Mode: offset in tenths of a dB down from <CS>.
Used as a threshold to determine the bandwidth over which to integrate the signal power.
Units: 0.1 dB.
Default: 3 dB | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4515.1.1.18.1.2.1.17 |
| slOSPRConfigAdmin The port admin status.
0 - DOWN, 1 - UP. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4515.1.1.18.1.2.1.2 |
| slOSPRConfigOper The port operational status.
0 - DOWN, 1 - UP. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4515.1.1.18.1.2.1.3 |
| slOSPRConfigAlias The port alias. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4515.1.1.18.1.2.1.4 |
| slOSPRConfigGrid ITU-T G.694.1 drid type.
1 - 100 GHz
2 - 50 GHz
3 - 25 GHz
4 - Flex Grid. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4515.1.1.18.1.2.1.5 |
| slOSPRConfigRefreshTime The minimal refresh time for the port.
Specified in 0.1 seconds.
0 - never refresh. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4515.1.1.18.1.2.1.7 |
| slOSPRConfigRestoreDefaults Writing this object restores the port parameters to thier defauls | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4515.1.1.18.1.2.1.8 |
| slOSPRConfigTR VC Mode: The threshold for channel valid channel (VC) detection.
Units: 0.1 dBm.
Default: -35 dBm | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4515.1.1.18.1.2.1.9 |