fcBxPortFcphVersionHigh
SL-FC-MIB ·
.1.3.6.1.4.1.4515.1.1.3.1.1.1.1.3
Object
column
FcphVersion
The highest or most recent version of FC-PH that the BxPort is configured to support.
Context
- MIB
- SL-FC-MIB
- OID
.1.3.6.1.4.1.4515.1.1.3.1.1.1.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- fcBxPortEntry
- Table
- fcBxPortTable
- Siblings
- 26
Syntax
FcphVersion
- Source
- FcphVersion
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| fcBxPortIndex The ifIndex of the port. | column | FcBxPortIndex | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.1 |
| fcBxPortClass2SeqDeliv A flag indicating whether or not Class 2 Sequential
Delivery is supported by the BxPort. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.10 |
| fcBxPortClass3SeqDeliv A flag indicating whether or not Class 3 Sequential
Delivery is supported by the BxPort. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.11 |
| fcBxPortHoldTime The maximum time (in microseconds) that the BxPort shall
hold a frame before discarding the frame if it is unable to
deliver the frame. The value 0 means that the BxPort does
not … | column | microseconds MicroSeconds | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.14 |
| fcBxPortFabricName The Name_Identifier of the Fabric to which this Fabric
Element belongs. | column | FcNameId | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.15 |
| fcBxPortPhysRttov The Receiver_Transmitter_Timeout value of the BxPort. This
is used by the receiver logic to detect Loss of
Synchronization. | column | milliseconds MilliSeconds | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.16 |
| fcBxPortTranceiverMedia The tranceiver media. | column | Enumeration | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.17 |
| fcBxPortPauseTimeout How much time should the SL wait after receiving
a Wait-Request from the remote SL. | column | milliseconds MilliSeconds | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.18 |
| fcBxPortBbThresholdRx After the number of available Rx buffer
crosses the fcBxPortBbThresholdRx value a flow control
packet is sent to the attached Ex port. | column | buffers FcBbCredit | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.19 |
| fcBxPortName The World_wide Name of this BxPort. Each BxPort has a
unique Port World_wide Name within the Fabric. | column | FcNameId | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.2 |
| fcBxPortBbThresholdTx After the number of available Tx buffer
crosses the fcBxPortBbThresholdRx value a flow control
packet is sent to the remote SL FC service port. | column | buffers FcBbCredit | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.20 |
| fcBxPortResetPmCounters Setting this variable to 1 will cause the current interval FC PM
counters of the port to be initialized to zero (0). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.21 |
| fcBxPortTranceiverType The tranceiver type. | column | Enumeration | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.22 |
| fcBxPortWwnTransparent TRUE - means that the values of fcBxPortFabricName and fcBxPortFabricName
are determined by the switches connected to the remote SL.
FLASE - means the the values of fcBxPortFabric… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.23 |
| fcBxPortAdminSpeed Determine the speed of the interface for the Auto-Negotiation purpose. | column | FcPortSpeed | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.24 |
| fcBxPortRestartLink Write operation to this object Restart the FC link.
When Read, this object always return False. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.25 |
| fcBxPortTransceiverRate The nominal bit rate of the transceiver in 100 MBps units. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.26 |
| fcBxPortElpInitiator 1 - B to B port, initiating ELP
2 - B to E port classic (our usual, without sending ELP)
3 - F to N port, spoofing FLOGI sequence
4 - N to N port, spoofing PLOGI sequence
5 - tran… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.27 |
| fcBxPortRemoteSwitchFabricName Remote switch fabric WWN use to mimic remote ELP response | column | FcNameId | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.28 |
| fcBxPortRemoteSwitchPortName Remote switch port WWN use to mimic remote ELP response | column | FcNameId | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.29 |
| fcBxPortFcphVersionLow The lowest or earliest version of FC-PH that the BxPort is
configured to support. | column | FcphVersion | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.4 |
| fcBxPortBbCredit The total number of receive buffers available for holding
Class 1 connect-request, Class 2 or 3 frames from the
attached ExPort. It is for buffer-to-buffer flow control
in the di… | column | buffers FcBbCredit | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.5 |
| fcBxPortRxBufSize The largest Data_Field Size (in octets) for an FT_1 frame
that can be received by the BxPort. | column | bytes FcRxDataFieldSize | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.6 |
| fcBxPortRatov The Resource_Allocation_Timeout Value configured for the
BxPort. This is used as the timeout value for determining
when to reuse an ExPort resource such as a
Recovery_Qualifier. … | column | milliseconds MilliSeconds | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.7 |
| fcBxPortEdtov The E_D_TOV value configured for the BxPort. The
Error_Detect_Timeout Value is used as the timeout value for
detecting an error condition. | column | milliseconds MilliSeconds | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.8 |
| fcBxPortCosSupported A value indicating the set of Classes of Service supported
by the BxPort. | column | FcCosCap | .1.3.6.1.4.1.4515.1.1.3.1.1.1.1.9 |