pdnOutputFuseValueStr
SITEBOSS-572-STD-MIB ·
.1.3.6.1.4.1.3052.20.1.5.4.1.1.31
Object
column
SNMPv2-TCDisplayString
The state of the fuse of the power distributor output specified by pdnIndexPD and pdnIndexOutput. Possible values for this object are: 'BLOWN' and 'OK'. This object exists only for power distributors with fuse monitoring support.
Context
- MIB
- SITEBOSS-572-STD-MIB
- OID
.1.3.6.1.4.1.3052.20.1.5.4.1.1.31- Type
- column
- Access
- readonly
- Status
- current
- Parent
- pdnEntry
- Table
- pdnTable
- Siblings
- 35
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| pdnIndexPD Index for table of power distribution objects, specifically the
index that refers to which power distributor. A value of 200 means
the internal power distributor. A value from 1… | column | Integer32 | .1.3.6.1.4.1.3052.20.1.5.4.1.1.1 |
| pdnMainCurrentLowCurrent The current, in mA, for the main current sensor's Low event threshold,
for the power distributor specified by pdIndexPD. pdnIndexOutput should be 1
for this object. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.20.1.5.4.1.1.10 |
| pdnMainCurrentVLowCurrent The current, in mA, for the main current sensor's Very Low event threshold,
for the power distributor specified by pdIndexPD. pdnIndexOutput should be 1
for this object. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.20.1.5.4.1.1.11 |
| pdnMainVoltageInEventState The event state of the voltage event of the power distributor
specified by pdnIndexPD. pdnIndexOutput should be 1 for this object.
Possible values for this object are: 'Very Low'… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.5.4.1.1.12 |
| pdnMainVoltageValue The voltage, in mV, at the power distributor specified by pdnIndexPD.
If pdnIndexPD is 200 then this is the internal power distributor and refers to
the voltage at the S572 (which… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.20.1.5.4.1.1.13 |
| pdnMainVoltageValueStr Essentially pdnMainVoltageValue formatted as a string in units of Volts, with
3 decimal places. pdnIndexOutput should be 1 for this object. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.5.4.1.1.14 |
| pdnMainVoltageDeadband The deadband, in mV, for the main voltage sensor for the power distributor
specified by pdIndexPD. pdnIndexOutput should be 1 for this object. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.20.1.5.4.1.1.15 |
| pdnMainVoltageVHighVoltage The voltage, in mA, for the main voltage sensor's Very High event threshold,
for the power distributor specified by pdIndexPD. pdnIndexOutput should be 1
for this object. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.20.1.5.4.1.1.16 |
| pdnMainVoltageHighVoltage The voltage, in mV, for the main voltage sensor's High event threshold,
for the power distributor specified by pdIndexPD. pdnIndexOutput should be 1
for this object. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.20.1.5.4.1.1.17 |
| pdnMainVoltageLowVoltage The voltage, in mV, for the main voltage sensor's Low event threshold,
for the power distributor specified by pdIndexPD. pdnIndexOutput should be 1
for this object. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.20.1.5.4.1.1.18 |
| pdnMainVoltageVLowVoltage The voltage, in mV, for the main voltage sensor's Very Low event threshold,
for the power distributor specified by pdIndexPD. pdnIndexOutput should be 1
for this object. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.20.1.5.4.1.1.19 |
| pdnIndexOutput Index for table of power distribution objects, specifically the
index that refers to which output on the power distributor specified
by pdnIndexPD. For objects where the output i… | column | Integer32 | .1.3.6.1.4.1.3052.20.1.5.4.1.1.2 |
| pdnMainPowerValue The power, in Watts, for the power distributor specified by pdIndexPD.
pdnIndexOutput should be 1 for this object. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.20.1.5.4.1.1.20 |
| pdnMainPowerValueStr The power, in Watts, for the power distributor specified by pdIndexPD,
formatted as a string with the unit name 'Watts'. pdnIndexOutput should be 1
for this object. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.5.4.1.1.21 |
| pdnOutputCurrentInEventState The event state of the current (i.e. Amps) event of the power distributor
output specified by pdnIndexPD and pdnIndexOutput. E.g., for pdnIndexPD=200
and pdnIndexOutput=2, this r… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.5.4.1.1.22 |
| pdnOutputCurrentValue The current drawn, in mA, for the power distributor output specified by
pdnIndexPD and pdIndexOutput. If pdnIndexPD is 200 then this is the internal
power distributor and refers … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.20.1.5.4.1.1.23 |
| pdnOutputCurrentValueStr Essentially pdnOutputCurrentValue formatted as a string in units of Amps, with
3 decimal places. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.5.4.1.1.24 |
| pdnOutputCurrentDeadband The deadband, in mA, for the main current sensor for the power distributor
specified by pdIndexPD. The power output is specified by pdnIndexOutput. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.20.1.5.4.1.1.25 |
| pdnOutputCurrentVHighCurrent The current, in mA, for a specific power output's current sensor Very High
event threshold, for the power distributor specified by pdIndexPD. The power
output is specified by pdn… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.20.1.5.4.1.1.26 |
| pdnOutputCurrentHighCurrent The current, in mA, for a specific power output's current sensor High event
threshold, for the power distributor specified by pdIndexPD. The power output
is specified by pdnIndex… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.20.1.5.4.1.1.27 |
| pdnOutputCurrentLowCurrent The current, in mA, for a specific power output's current sensor Low event
threshold, for the power distributor specified by pdIndexPD. The power output
is specified by pdnIndexO… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.20.1.5.4.1.1.28 |
| pdnOutputCurrentVLowCurrent The current, in mA, for a specific power output's current sensor Very Low
event threshold, for the power distributor specified by pdIndexPD. The power
output is specified by pdnI… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.20.1.5.4.1.1.29 |
| pdnConfig The number of outputs on the power distributor specified by pdnIndexPD.
pdnIndexOutput should be 1 for this object. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.5.4.1.1.3 |
| pdnOutputFuseInEventState The event state of the fuse event of the power distributor output specified
by pdnIndexPD and pdnIndexOutput. E.g., for pdnIndexPD=14 and pdnIndexOutput=2,
this refers to power o… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.5.4.1.1.30 |
| pdnMainCombinedStatus Combined status string intended to be parsed by NMS:
format: voltageColorCode`voltageEventState`voltageValue`mainCurrentColorCode`mainCurrentEventState`mainCurrentValue`deviceCurr… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.5.4.1.1.32 |
| pdnOutputCombinedStatusBlock1 Combined status string intended to be parsed by NMS:
format: numInBlock~outputCurrentColorCode1`outputCurrentEventState1`outputCurrentValue1`fuseColorCode1`fuseValue1~... | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.5.4.1.1.33 |
| pdnOutputCombinedStatusBlock2 Combined status string intended to be parsed by NMS:
format: numInBlock~outputCurrentColorCode1`outputCurrentEventState1`outputCurrentValue1`fuseColorCode1`fuseValue1~... | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.5.4.1.1.34 |
| pdnDeviceCurrentValue Current drawn by device in mA. For the internal power distributor device,
this is the current drawn by the SiteBoss 571. For an external power
distributor device (PowerBoss), th… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.20.1.5.4.1.1.35 |
| pdnDeviceCurrentValueStr Current drawn by device as a string with units (Amps). For the internal
power distributor device, this is the current drawn by the SiteBoss 571.
For an external power distributor… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.5.4.1.1.36 |
| pdnMainCurrentInEventState The event state of the current (i.e. Amps) event of the power distributor
specified by pdnIndexPD. pdnIndexOutput should be 1 for this object.
Possible values for this object are… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.5.4.1.1.4 |
| pdnMainCurrentValue The current drawn, in mA, for the power distributor specified by pdnIndexPD.
If pdnIndexPD is 200 then this is the internal power distributor and refers to
the current drawn by th… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.20.1.5.4.1.1.5 |
| pdnMainCurrentValueStr Essentially pdnMainCurrentValue formatted as a string in units of Amps, with
3 decimal places. pdnIndexOutput should be 1 for this object. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.5.4.1.1.6 |
| pdnMainCurrentDeadband The deadband, in mA, for the main current sensor for the power distributor
specified by pdIndexPD. pdnIndexOutput should be 1 for this object. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.20.1.5.4.1.1.7 |
| pdnMainCurrentVHighCurrent The current, in mA, for the main current sensor's Very High event threshold,
for the power distributor specified by pdIndexPD. pdnIndexOutput should be 1
for this object. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.20.1.5.4.1.1.8 |
| pdnMainCurrentHighCurrent The current, in mA, for the main current sensor's High event threshold,
for the power distributor specified by pdIndexPD. pdnIndexOutput should be 1
for this object. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.20.1.5.4.1.1.9 |