acpmsCurrentPhaseAValueStr
SITEBOSS-572-STD-MIB ·
.1.3.6.1.4.1.3052.20.1.8.1.1.16
Object
column
SNMPv2-TCDisplayString
Phase A current, in amps. This is calculated using the formula (register * CT ratio * 0.001).
Context
- MIB
- SITEBOSS-572-STD-MIB
- OID
.1.3.6.1.4.1.3052.20.1.8.1.1.16- Type
- column
- Access
- readonly
- Status
- current
- Parent
- acpmStatusEntry
- Table
- acpmStatusTable
- Siblings
- 56
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| acpmsIndex Index for AC power monitors | column | Integer32 | .1.3.6.1.4.1.3052.20.1.8.1.1.1 |
| acpmsVoltagePhaseCValueStr Phase C voltage, in volts. This is calculated using the formula
(register * PT ratio * 0.1). | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.10 |
| acpmsAvgCurrentValueStr Average current, in amps. This is calculated using the formula
(register * CT ratio * 0.001). This could be either the average of
the phase currents, or the sum of the phase curre… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.11 |
| acpmsAvgCurrentMinStr Minimum average current value since last reset, in amps. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.12 |
| acpmsAvgCurrentMaxStr Maximum average current value since last reset, in amps. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.13 |
| acpmsAvgCurrentAvgStr Average average current value since last reset, in amps. This is
the unit's average of its measurements of the average current reported
by the AC power monitor device. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.14 |
| acpmsAvgCurrentInEventState Event state of this AC power monitor current (Low, Normal, High, etc.). | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.15 |
| acpmsCurrentPhaseBValueStr Phase B current, in amps. This is calculated using the formula
(register * CT ratio * 0.001). | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.17 |
| acpmsCurrentPhaseCValueStr Phase C current, in amps. This is calculated using the formula
(register * CT ratio * 0.001). | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.18 |
| acpmsAvgFreqValueStr Frequency, in hertz. On the YD2010, this is calculated using the
formula (register * 0.00106813). On the WattsOn, this is calculated
using the formula (register * 0.1). | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.19 |
| acpmsName Name for the AC power monitor device. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.2 |
| acpmsAvgFreqMinStr Minimum frequency value since last reset, in hertz. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.20 |
| acpmsAvgFreqMaxStr Maximum frequency value since last reset, in hertz. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.21 |
| acpmsAvgFreqAvgStr Average frequency value since last reset, in hertz. This is the
unit's average of its measurements of the average frequency reported
by the AC power monitor device. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.22 |
| acpmsAvgFreqInEventState Event state of this AC power monitor frequency (Low, Normal, High, etc.). | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.23 |
| acpmsTRPValueStr Total real power, in watts. On the YD2010, this is calculated using
the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is
the voltage range taken from register 0x… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.24 |
| acpmsTRPMinStr Minimum total real power value since last reset, in watts. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.25 |
| acpmsTRPMaxStr Maximum total real power value since last reset, in watts. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.26 |
| acpmsTRPAvgStr Average total real power value since last reset, in watts. This is
the unit's average of its measurements of the average total real power
reported by the AC power monitor device. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.27 |
| acpmsTRPInEventState Event state of this AC power monitor total real power (Low, Normal,
High, etc.). | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.28 |
| acpmsRPPhaseAValueStr Phase A real power, in watts. On the YD2010, this is calculated using
the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is
the voltage range taken from register … | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.29 |
| acpmsAvgVoltageValueStr Average voltage, in volts. This is calculated using the formula
(register * PT ratio * 0.1). This could be either the average of
the phase voltages, or the sum of the phase voltag… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.3 |
| acpmsRPPhaseBValueStr Phase B real power, in watts. On the YD2010, this is calculated using
the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is
the voltage range taken from register … | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.30 |
| acpmsRPPhaseCValueStr Phase C real power, in watts. On the YD2010, this is calculated using
the formula (register * PT ratio * CT ratio * Urg * 0.4), where Urg is
the voltage range taken from register … | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.31 |
| acpmsCombined Combined status string intended to be parsed by NMS:
name`deviceState`deviceStateColorCode`voltage`current`frequency`power~voltageEventState`voltageColorCode`currentEventState`cur… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.32 |
| acpmsTPFValueStr Total power factor. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.33 |
| acpmsTPFMinStr Total power factor minimum value since last reset. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.34 |
| acpmsTPFMaxStr Total power factor maximum value since last reset. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.35 |
| acpmsTPFAvgStr Total power factor average value since last reset. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.36 |
| acpmsTPFInEventState Total power factor event state. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.37 |
| acpmsPFPhaseAValueStr Phase A power factor. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.38 |
| acpmsPFPhaseBValueStr Phase B power factor. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.39 |
| acpmsAvgVoltageMinStr Minimum average voltage value since last reset, in volts. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.4 |
| acpmsPFPhaseCValueStr Phase C power factor. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.40 |
| acpmsTRcPValueStr Total reactive power, in VAR. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.41 |
| acpmsTRcPMinStr Total reactive power minimum value since last reset, in VAR. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.42 |
| acpmsTRcPMaxStr Total reactive power maximum value since last reset, in VAR. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.43 |
| acpmsTRcPAvgStr Total reactive power average value since last reset, in VAR. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.44 |
| acpmsRcPPhaseAValueStr Phase A reactive power, in VAR. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.45 |
| acpmsRcPPhaseBValueStr Phase B reactive power, in VAR. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.46 |
| acpmsRcPPhaseCValueStr Phase C reactive power, in VAR. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.47 |
| acpmsTAPValueStr Total apparent power, in VA. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.48 |
| acpmsTAPMinStr Total apparent power minimum value since last reset, in VA. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.49 |
| acpmsAvgVoltageMaxStr Maximum average voltage value since last reset, in volts. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.5 |
| acpmsTAPMaxStr Total apparent power maximum value since last reset, in VA. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.50 |
| acpmsTAPAvgStr Total apparent power average value since last reset, in VA. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.51 |
| acpmsAPPhaseAValueStr Phase A apparent power, in VA. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.52 |
| acpmsAPPhaseBValueStr Phase B apparent power, in VA. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.53 |
| acpmsAPPhaseCValueStr Phase C apparent power, in VA. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.54 |
| acpmsTotalEnergyWh Total energy, in Wh. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.20.1.8.1.1.55 |
| acpmsTotalEnergyVAR Total reactive energy, in VAR. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.20.1.8.1.1.56 |
| acpmsTotalEnergyVA Total apparent energy, in VA. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.20.1.8.1.1.57 |
| acpmsAvgVoltageAvgStr Average average voltage value since last reset, in volts. This is
the unit's average of its measurements of the average voltage
reported by the AC power monitor device. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.6 |
| acpmsAvgVoltageInEventState Event state of this AC power monitor voltage (Low, Normal, High, etc.). | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.7 |
| acpmsVoltagePhaseAValueStr Phase A voltage, in volts. This is calculated using the formula
(register * PT ratio * 0.1). | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.8 |
| acpmsVoltagePhaseBValueStr Phase B voltage, in volts. This is calculated using the formula
(register * PT ratio * 0.1). | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.20.1.8.1.1.9 |