portConfigDAEnable
SITEBOSS-530-STD-MIB ·
.1.3.6.1.4.1.3052.12.2.3.2.1.8
Object
1=Enable the Data Alarm Evaluator for data on this port. 0=Do not evaluate data on this port.
Context
- MIB
- SITEBOSS-530-STD-MIB
- OID
.1.3.6.1.4.1.3052.12.2.3.2.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- portConfigEntry
- Table
- portConfigTable
- Siblings
- 27
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| portConfigIndex Index for ports | column | Integer32 | .1.3.6.1.4.1.3052.12.2.3.2.1.1 |
| portConfigRecordTimeout Timeout after last unterminated data received upon
which data collected so far is stored as a record. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.12.2.3.2.1.10 |
| portConfigDataType How the port interprets incoming data: ASCII/BINARY | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.12.2.3.2.1.11 |
| portConfigEtxToCRLF ON/OFF whether the port translates incoming ETX to CRLF | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.12.2.3.2.1.12 |
| portConfigMLREnable ON/OFF Whether Multiline Records are collected on this port. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.12.2.3.2.1.13 |
| portConfigMLRStartField1Pos Position of MLR start field 1 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.12.2.3.2.1.14 |
| portConfigMLRStartField1Text Text to match MLR start field 1 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.12.2.3.2.1.15 |
| portConfigMLRStartField2Pos Position of MLR start field 2 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.12.2.3.2.1.16 |
| portConfigMLRStartField2Text Text to match MLR start field 2 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.12.2.3.2.1.17 |
| portConfigMLRNumLinesBefore Number of lines before the starting line which should
be included in the MLR | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.12.2.3.2.1.18 |
| portConfigMLREndDetection How the MLR parser determines what ends an MLR: by FORMULA,
number of lines received so far (COUNT), or number of blank
lines received so far (BLANKS) | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.12.2.3.2.1.19 |
| portConfigBaud Baud rate, 19200, 9600, etc. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.12.2.3.2.1.2 |
| portConfigMLRLineCount Number of lines in the MLR (used by the end detection mode) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.12.2.3.2.1.20 |
| portConfigMLREndField1Pos Position of MLR end field 1 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.12.2.3.2.1.21 |
| portConfigMLREndField1Text Text to match MLR end field 1 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.12.2.3.2.1.22 |
| portConfigMLREndField2Pos Position of MLR end field 2 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.12.2.3.2.1.23 |
| portConfigMLREndField2Text Text to match MLR end field 2 | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.12.2.3.2.1.24 |
| portConfigMLRUseComplexRules ON/OFF MLR parser uses complex rules (field possitions/
formulas, etc.) | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.12.2.3.2.1.25 |
| portConfigBufferPT ON/OFF records received during passthrough mode are
buffered/stored in the database | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.12.2.3.2.1.26 |
| portConfigId The text identifer for the port | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.12.2.3.2.1.27 |
| portConfigMode Mode of the serial port. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.12.2.3.2.1.28 |
| portConfigHsk Handshaking mode of the serial port. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.12.2.3.2.1.29 |
| portConfigDataFormat Value representing word length, parity, and
stop bits: 0=8N1, 1=7E1, 2=7O1, 3=7N1, 4=8O2 | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.12.2.3.2.1.3 |
| portConfigStripPtOutputLfs Strip passthrough LFs sent to device on this port:
1=yes, 0=no. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.12.2.3.2.1.4 |
| portConfigStripPtInputLfs Strip passthrough LFs received from device on this
port: 1=yes, 0=no. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.12.2.3.2.1.5 |
| portConfigMaskEnable 1=Use the character mask on this port. 0=Do
not use the mask. When the mask is enabled,
the following ASCII characters are ignored
on the port:
0, 1, 4-9, 11, 12, 14-31, 128-255… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.12.2.3.2.1.7 |
| portConfigStoreAlarmsDPT ON/OFF: store alarms received during passthrough | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.12.2.3.2.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| ftpPushPushFileIndex Index for table of files to push | column | Integer32 | .1.3.6.1.4.1.3052.12.2.4.9.8.1.1 |