esPointName
SITEBOSS-530-STD-MIB ·
.1.3.6.1.4.1.3052.12.1.1.1.1.4
Object
The name of the point on an EventSensor. For example,
'AC temp' (in the case of the temperature sensor on an
EventSensor).
There can be multiple points of the same point class on an
EventSensor (e.g., 8 contact closures) and multiple sensor
classes on an EventSensor (e.g., temperature, contact closure,
humidity).
If the point referenced by a given point index is solitary
(e.g., temperature sensor, because there can be only one on
an EventSensor), then this object reads as '<EventSensor
name>'. Setting this object for solitary point indices sets
the EventSensor name only.
On the other hand, if a given point is among other points of
the same point class on an EventSensor, then this object reads
as '<Sensor name>'. Setting this object for these NON-
solitary point indices sets the sensor name only - not the
EventSensor name.
Context
- MIB
- SITEBOSS-530-STD-MIB
- OID
.1.3.6.1.4.1.3052.12.1.1.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- esPointEntry
- Table
- esPointTable
- Siblings
- 10
Values & Constraints
Enumerated Values
0 | disable |
1 | enable |
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| esIndexES The part of the point index that refers to an
EventSensor.
The point index is a string of 3 numbers separated
by periods. It contains all the information
necessary… | column | Integer32 | .1.3.6.1.4.1.3052.12.1.1.1.1.1 |
| esPointAliasValueStr For CC inputs, this is the CC active/inactive alias setting
setting value that currently corresponds to the event state.
So if the CC input is in the event state, then this object… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.12.1.1.1.1.10 |
| esPointClassValueStr For CC inputs, this is the CC active/inactive class setting
setting value that currently corresponds to the event state.
So if the CC input is in the event state, then this object… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.12.1.1.1.1.11 |
| esIndexPC The part of the point index that refers to point class.
The point index is a string of 3 numbers separated by periods.
It contains all the information necessary for… | column | Integer32 | .1.3.6.1.4.1.3052.12.1.1.1.1.2 |
| esIndexPoint The part of the point index that delineates which
sensor on the EventSensor.
So this combined with esIndexPC (Point Class or type)
and esIndexES (which EventSensor)… | column | Integer32 | .1.3.6.1.4.1.3052.12.1.1.1.1.3 |
| esPointInEventState A number referring to the event state of a point
on an EventSensor. This number can have different
meanings depending on the point class.
If the point class is tem… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3052.12.1.1.1.1.5 |
| esPointValueInt A read-only number referring to the value of a
point on an EventSensor.
If the point class is temperature, then this object
is the temperature in its configured sca… | column | Integer32 | .1.3.6.1.4.1.3052.12.1.1.1.1.6 |
| esPointValueStr A string referring to the value of a point on an
EventSensor.
For contact closures this object is either 'Open'
or 'Closed'.
For outputs this object … | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.12.1.1.1.1.7 |
| esPointTimeLastChange The time of the last time an event was
triggerred for a point on an EventSensor in
MM/DD/YY HH:MM:SS format.
For contact closures, the possible events are
Active an… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.3052.12.1.1.1.1.8 |
| esPointTimetickLastChange The time of the last time an event was
triggerred for a point on an EventSensor in
100ths of seconds since reset.
For contact closures, the possible events are
Acti… | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.3052.12.1.1.1.1.9 |